WS-915

I sent my proof of purchase.

Here is my scenario. I have 20 plus Assigned Buttons configured for the TBM930. I finished this up this past weekend, and everything was working perfectly. Yesterday during a flight, all was good until I landed. Upon landing none of the AAO assigned buttons were working. I could no longer zoom the range on the G1000, BARO dials no longer functioned, Softkeys on the G1000 no longer functioned. I thought maybe it was some port issue, so here is what I did to check that. 1. Closed down AAO 2. Opened the AXISANDOHS FIP PANEL with the TBM930 loaded. The border was RED. I left it open. 3. Started up AAO, it immediately loaded my TBM 930 Asobo profile and the RED border around the FIP Panel went away, so I am assuming it is communicating via the correct ports. When I turn any dials or push any buttons, the green lights go green in the Assigned Buttons listing verifying they are being seen as I turn and push on the FlightSimBuilder G1000 panels. The game graphics are not reflecting that change. I am pulling my hair out on this one. Everything was working just excellent with AAO and Stream Deck. All the Stream Deck functions are moving the dials and buttons correctly in the sim, and visually on the screen. Any suggestions?

LOL, nice scenario. I understand what you are saying. I really appreciate your time and effort.

Here is a link with a couple photos that explains what I was attempting. Stream Deck GTC example As mentioned in the photo of my Lenovo Touch Screen laptop, I wanted to use the Speed Deck to navigate Between PFD, MFD and NAV/COM. My laptop does not have those buttons available as they are physical buttons of course. I tried to target the second GTC, but that did not seem to work, or maybe I was doing it incorrectly. I guess I get picky:) as everything functions as normal with the exception of the green arrows showing up on GTC2, and I can live with that as I can see the changes on my laptop screen go green, just not in the Stream Deck.

I am surely missing something with the Read ON value. The following work great, Pointer turns green when selected and the ones not selected turn off AS3000_TSC_Horizontal_1_SoftKey_1 G3000_GTC_PAGE ON Value 0 AS3000_TSC_Horizontal_1_SoftKey_2 G3000_GTC_PAGE ON Value 1 AS3000_TSC_Horizontal_1_SoftKey_3 G3000_GTC_PAGE ON Value 2 The following change correctly to PFD, MFD and NAV/COM, Pointers DO NOT turn green when selected and ALL are OFF. AS3000_TSC_Horizontal_2_SoftKey_1 G3000_GTC_PAGE ON Value 0 AS3000_TSC_Horizontal_2_SoftKey_2 G3000_GTC_PAGE ON Value 1 AS3000_TSC_Horizontal_2_SoftKey_3 G3000_GTC_PAGE ON Value 2 Based on your document I think the ON Value for the second TSC are incorrect. I have tried numbers up to 26, but not color change. What am I missing here?

Thank You so much, I have the G3000 bridge in, and it solved all the issues with the buttons going green on the GTC screens. This was the best money I have spent on your application. I was using MobiFlight, but have since reconfigured my other 2 aircraft into AAO. It's just so much easier to work with. The support here is excellent as well. I am using the 15 button Stream Deck, so thank goodness I had your app to migrate those buttons from the XL to my 15. When I did not see the PFD, MFD, NAV/COM show up on my first SD plugin, I was a bit disappointed, then thought maybe they were in the XL end of it, and low and behold they were. Can't say enough good things about AAO. Sure has brought my Sim Immersion up 100%. I have a pair of the FlightSimBuilder G1000 panels for the PFD and MFD, and it's been a blessing to map all the functions like Range +- into them with AAO as well as Baro,and so many more options to the physical G1000 panels even for the Longitude.I literally do not have to use my mouse now for any flight.

I am looking to find out if anyone knows of a variable to track the status of the 3 PFD/MFD AS3000_TSC_Horizontal_1_SoftKey_x in the TBM930? I don't have any problem selecting the one I want with AAO and Stream Deck, but I would like to light up the one that is selected and remove the green arrow from the one that is NOT selected. I have pulled my hair out trying to find the variable for the A: Read Appreciate any info anyone can share about this. Thank You

As of 8:37 Eastern Time, issue remains.