IrwinMFletcher

I do not know why converting GPS WP ETE to hh:mm:ss and GPS WP ETA to hh:mm (sim time not pc time) I am sure it has to by my attempt at some rpn scripting: %(E:GPS WP ETE, Hours)%!02d! ':' scat %(E:GPS WP ETE, Minutes) (E:GPS WP ETE, Hours) 60 * - %!02d! ':' scat %(E:GPS WP ETE, Seconds) (E:GPS WP ETE, Minutes) 60 * - %!02d! scat (this is on one line) My StreamDeck displays null for GPS WP ETE instead of hh:mm:ss same goes for: %(E:GPS WP ETA, Hours)%!02d! ':' scat %(E:GPS WP ETA, Minutes) (E:GPS WP ETA, Hours) 60 * - %!02d! ':' scat %(E:GPS WP ETA, Seconds) (E:GPS WP ETA, Minutes) 60 * - %!02d! scat What do I need to format GPS WP ETE as hh:mm:ss AND GPS WP ETA as hh:mm I am using the S: type variable in the AAO StreamDeck plugin... I did learn that much. Again, thanks for your time.

I am struggling to get the AAO WebAPI to work and am unsure what information you might need to help me figure out what I'm doing wrong. I will try to include as many details as possible. **My details:** - Windows 11 - AAO 4.51 b09 - MSFS 2024 (purchased from the Microsoft Store, not Steam) - Default installation location - I’ve created inbound and outbound rules for AAO and for ports 43380 and 43381 - I’ve completely disabled the Windows firewall - The AAO LEDs in the bottom-right corner indicate that the WebAPI is listening - MSFS 2024 is open (not in a menu) and sitting on the runway with a flight plan loaded - I’ve memorized the troubleshooting guide from [this link](https://www.axisandohs.com/uploads/6/0/8/2/60827113/axisandohs_webapi_troubleshooting.pdf) - When I try to visit the URL listed in the “Change WebAPI Address” dialog box (http://192.168.4.76:43380), I get this error: **This site can’t be reached** 192.168.4.76 refused to connect. Try: - Checking the connection - Checking the proxy and firewall - ERR_CONNECTION_REFUSED - WebFPI seems to work fine and will display preconfigured gauges without any issues or errors - I’ve tried both localhost and the local IP address with the same results I’ve tried searching YouTube and even consulted several AI platforms for insights, but no success so far. I would really appreciate any help. I’ve restarted and rebooted, but the issue persists. I have attached some screenshots. Thank you in advance! 1. https://drive.google.com/file/d/1cPgrQNKIIKabnzP0wCvkIu9wS7uHN5TR/view?usp=drivesdk 2. https://drive.google.com/file/d/14sB2R0sr13JAZPiY5bQ8rbuYd_lmHjbs/view?usp=drivesdk 3. https://drive.google.com/file/d/19LoxQQTw2qTuWnzSX10GX75SKhmOqu6p/view?usp=drivesdk Joe

Thanks for the reply. I have tried http://192.168.4.76:43380 and the connection is refused. I tried localhost with the same results. I even tried several AI apps to help trouble shoot and they all cam up with some version of "Make sure MSFS24 is running" or "AAO is not running". Re-reading the documentation for the 100th time... I turned off my Windows 11 firewall. No antivirus to worry about.

Hello, I am trying to get the WebApi function working in AAO. However, on the Tools > WebAPI Config menu I am unable to put a checkmark next to StreamDeck plugin. https://drive.google.com/file/d/1jGwk9ie4ackdIc4Sm9Xpr2wLNSuQ_Fr_/view?usp=drivesdk I have tried everything in the troubleshooting guide, in fact I think I can recite it from memory. What am I doing wrong, I can't get conencted to the WebAPI. Thanks

Wow! Thank you for your amazing and detailed help, I greatly appreciate it!

Hello, I am trying to do something that I would think would be easy if I had any clue to what I was doing. I want to take the variable COM ACTIVE FREQ TYPE:1, String and change the out put based on the value of the variable. "ATIS" - ATIS "UNI" - UNICOM "CTAF" - CTAF "GND" - GROUND "TWR" - TOWER "CLR" - CLEARANCE DELIVERY "APPR" - APPROAACH "DEP" - DEPARTURE "FSS" - FSS "AWS" - AWOS I know it's a very minor issue but I am really trying to learn how to use RPN and I thought this would be a simple project. Here is the latest version of my RPN script: (A:COM ACTIVE FREQ TYPE:1, String) 'ATIS' scmp 0 == if{ 'ATIS' } els{ (A:COM ACTIVE FREQ TYPE:1, String) 'UNI' scmp 0 == if{ 'UNICOM' } els{ (A:COM ACTIVE FREQ TYPE:1, String) 'CTAF' scmp 0 == if{ 'CTAF' } els{ (A:COM ACTIVE FREQ TYPE:1, String) 'GND' scmp 0 == if{ 'GROUND' } els{ (A:COM ACTIVE FREQ TYPE:1, String) 'TWR' scmp 0 == if{ 'TOWER' } els{ (A:COM ACTIVE FREQ TYPE:1, String) 'CLR' scmp 0 == if{ 'CLEARANCE DELIVERY' } els{ (A:COM ACTIVE FREQ TYPE:1, String) 'APPR' scmp 0 == if{ 'APPROACH' } els{ (A:COM ACTIVE FREQ TYPE:1, String) 'DEP' scmp 0 == if{ 'DEPARTURE' } els{ (A:COM ACTIVE FREQ TYPE:1, String) 'FSS' scmp 0 == if{ 'FSS' } els{ (A:COM ACTIVE FREQ TYPE:1, String) 'AWS' scmp 0 == if{ 'AWOS' } els{ 'NONE' } } } } } } } } } } } In the streamdeck the RPN is all on one line and the variable type is S:. Depending on how I edit the RPN (read make a bigger mess) the button will either be completely blank of more likely it just stays at the same value on the SD button. The variable is updating in AAO and in SpadNext so I know it is my sub par attempt at RPN. Can someone point out where I am going wrong? Thank you, Joe

THANK YOU!

Ok, I'm getting the hang of this a little bit. I want to create a multi tile gauge using the variable: ATC RUNWAY AIRPORT NAME, String The gauge is 4x1. I created 1,1 and all of the text is there. I copy 1,1 and change the tiling from 1,1 to2,1 and so forth with 3,1 and 4,1 However, as you can see in the first image the text is cutoff after ARMSTRO then in 2,1 the text NEW is just a bit too far to the left. What happened to the rest of the word ARMSTRONG? Can you please explain how Split Text, Min Width, Stretch Split work? What am I missing to get the text to spread over the 4x1 multi tile gauge. As always, thanks for your detailed answers, I am learning still. Joe 1. https://drive.google.com/file/d/1anOCGkkDGT-oDj0exGR6DpzI531v1iWq/view?usp=drivesdk 2. https://drive.google.com/file/d/1_Zwa-OxLgKVO8GwaY1ygY8KvqRvHgJaX/view?usp=drivesdk 3. https://drive.google.com/file/d/1VROQTRdzg2LNpjZOfCwFG0Sf3YQsVDEm/view?usp=drivesdk 4. https://drive.google.com/file/d/1qbOyxpVKFRNByi6VDndFaHn9nNO5rGT-/view?usp=drivesdk 5. https://drive.google.com/file/d/140rLBH6M6IYNqCVclQKW26kgkKh7dwzG/view?usp=drivesdk

Thanks for the help. I am still missing something fundamental. I followed your instruction above and am now able to create the text definitions. However my 2x1 multi tile gauge displays the same information both buttons. I copied the first button as you instructed, then the only thing I changed was the position from 1,1 to 2,1. How do I get the text to strect from 1,1 to 2,1?

Hello, I am still struggling getting a Multi Tile Gauge to work. As an excercise I am trying to get what I thought was a very simple Multi Tile Gauge. Grid Size: 2 x 1 Variable to Display: ATC RUNWAY AIRPORT NAME, String (split between the 2 buttons - 2x1) Here are the settings that I have now but I have tried many things already, I even read the instructions. I just want to display text, no images are needed. However, nothing is displayed in either button TILE: 1,1 TILING Title: blank Tilepos X: 1 Tilepos Y: 1 Grid X: 2 Grid y: 1 Bezel: Checked - corrected for the gaps IMAGE DEFINITIONS Set Image Def: blank Header: blank Layer: 0 Visibility Variable: blank Visibility Value: blank Visibility Variable: blank Rotation Variable: A: blank Multiplier: 1.0 Turn Offset Deg: 0 Center Shift X: 0 Center Shift Y: 0 X Shift Variable: A: blank Multiplier: 1.0 X Offset: 0 Y Shift Variable: A blank Multiplier: 1.0 Y Offset: 0 Resize: Stretch to Fit - checked File: blank TEXT DEFINITIONS Header: text_left_button Clicked Add new text definition text_left_button disappears the Header field Select Text Definition: there are no options to select Visibility Variable: A: blank Visibility Value: blank Text Variable: A: ATC RUNWAY AIRPORT NAME, String Note: I also tried ATC RUNWAY AIRPORT NAME Offset: 0 Multiplier: 1 Decimals: 0 Leading 0s: 0 Shift X: 0 Shift Y: 40 Font: Tahoma Font Size: 25 Style: bold - unchecked italic - unchecked Split Text: No Minimum Width: 10 Stretch Split: No BACKGROUND/IMAGE Nothing uploaded or used in this section BUTTON SETTINGS Nothing used in this section TILE 2,1 Tile pos X: 2 Tile pos Y: 1 Grid X: 2 Grid Y: 1 Everything else is the same for button 2,1 as 1,1. If I use the variable ATC RUNWAY AIRPORT NAME, String on a Text Gauge it displays the information correctly, but tiny as there is too much text. Thanks for your assistance. If you know of any YouTube videos or other documentation other than the Lorby “Axis And Ohs” StreamDeck Plugin Documentation, which is more descriptive than instructional. Thanks, Joe

Ok, I've been playing around with this and I have a few questions. #1 This works perfectly, but has no decimal point due to the !d!. %(A:GENERAL ENG MIXTURE LEVER POSITION:1, Percent)%!d! '%' scat I tried this: %(A:GENERAL ENG MIXTURE LEVER POSITION:1, Percent)%!1f! '%' scat This return the value of 'ERR' - How can I format this so it displays one decimal point? #2 Is it possible to concatenate a variable along with another variable. Example: AMBIENT TEMPERATURE, Celsius + AMBIENT TEMPERATURE, Fahrenheit I know + is not the answer... Something like this is what I would like to accomplish: 21.1°C / 70.0°F #3 Is it possible to format the size of text in the above? I would like to make the units Superscript, or similar, so the unit is a little smaller and raised up a bit, just like this: °F - The ° is small and superscript. Is this even possible? Thanks again for answering all of my questions in such a detailed manner!

Hello, I am trying to get this profile for the StreamDeck to work properly: Avionics Suite for StreamDeck XL https://flightsim.to/file/44350/standard-avionics-suite-for-streamdeck-xl 1. AAO is up to date 2. AAO StreamDeck Plugin is up to date 3. I went through the trouble shooting PDF 4. Installed the Standard Avionics Suite.streamDeckProfile 5. Download and open the "zzz-lorbysi-aao-wtg1000.zip" - in the community folder 6. Ran AAO as Administrator 7. Restarted StreamDeck 8. Restarted AAO 9. Rebooted the PC10. MSFS 2024 - Cessna 172 Skyhawk11. Windows 11 Any ideas on how to get this working so the labels on the soft keys are displayed? Thanks in advance. Joe

Perfect. Thanks

Hello, I am not sure this is possible and I can't find anything that says it is, or isn't possible. With a simple StreamDeck Text Gauge (AAO plugin) can I display a value, 'Ambient Temperature, Fahrenheit', for example. That works and returns a value of 44. perfect. Now, immediately after the variable can i "concatenate" (excel terminology but I didn't know what else to call it, a symbol. Example of Current Output: 44 Desired Output: 44° Is it possible to add ° after the variable value? Thanks for all of you help with this question and all my other questions.

Thank you for your reply and assistance, I greatly appreciate it! So, when I try the above it displays NULL. Here is what I am working with: Text Gauge Variable 1: A: %(E:GPS WP ETE, Hours)%!02d! ':' scat %(E:GPS WP ETE, minutes) (E:GPS WP ETE, Hours) flr 60 * -%!02d! scat the result is 'null'. Along the same lines, I tried to add the seconds (hh:mm:ss) with this edit: %(E:GPS WP ETE, Hours)%!02d! ':' scat %(E:GPS WP ETE, minutes) (E:GPS WP ETE, Hours) flr 60 * -%!02d! ':' scat %(E:GPS WP ETE, seconds) (E:GPS WP ETE, minutes) flr 60 * -%!02d! scat (it's on one line) What simple thing am I missing?