Search the Community
Showing results for tags 'dash8-q400'.
Found 1 result
-
Hello on the forum With the release of the Majestic Q400 there have been some people asking questions. I found some of them to be rather frequent, and decided to explain it a bit in this thread. However I hope that we can continue to ask questions about using the newly Majestic Q400, at least until their own site comes up. The release thread is a long read.. I have been on it for quite some time, and I think I have read most of it.. I even contributed with questions myself =) Sorry bout the pictures, but couldn't work out the tags today First one I think we get a lot is how to set it up. Open up FSX and the MJC control panel, make sure your favourite joystick/throttle/yoke is plugged in =) In the MJC84 control panel program go to the flight control tab.. Looks like this https://www.dropbox.com/s/3vj9043a401dsq1/Control%201.PNG - > This link bugs up on every edit if it doesnt work its probably missing %20 before the 1 If you select your settings like this, your aileron axis will function as the tiller when the speed is below 40 knots.. There after use your rudder axis.. Make sure steering is On in the cockpit (It is by default) For the throttles select the engine control tab. The throttle works in detents, the trick is to specify which input on your throttle gives you which detent https://www.dropbox.com/s/mmvcz18u3yz58z2/Engine%20c.PNG -> This link bugs up on every edit if it doesn't work its probably missing %20 before the c in the URL Here you can see what 'MAX' 'DETENT' 'IDLE' 'DISC' (max)'REVERSE' is https://www.dropbox.com/s/omb744escclit74/Powerplant.PNG So as the picture says, move your throttle lever and moniter what values becomes visible in the input field. Type this number at the function you want it to have effect in.. I would recommend that you add some null-zones. Next one I have seen is how to enable the TCAS Simply press and hold the LSK 8 (right side lowest) for 2 seconds and it will start transmitting. If you want to change how TCAS settings press the Function control key 'exp' button. after selecting LSK 8 https://www.dropbox.com/s/h1g3lycih03z1l8/Arcdu.PNG Basic startup tutorial Go trough theese steps https://www.dropbox.com/s/ibcuch75ld57eec/Overhd.PNG And after that you select the condition levers from the picture before to start&feather. Confirm with a mouseover! When you head the click, (switch 5 moving back in posistion) start the procedure for next engine. I hope that we can grow this FAQ.. so submit questions or answers, and I will add them (with credit) to this post.. Happy flying to add: There is NO function to select c&d but you can set everything to cold and dark in the Q400, and then save the flight and make it default if you want cold & dark Contribution from FSXman I have a joystick to my left that is dedicated for steering tiller. I set it to "spoilers" in FSUIPC, then go into the Majestic control panel, click on the "spoilers" for steering tiller, and set it up per the instructions. My tiller works perfectly. If your airport doesn't have a SID, then the selection of a SID won't be in the "Menu>Departure" page, when you select it while you are on the Flightplan page. It seems that if you want to takeoff without using the available SIDs, then just put your airport at the top line of your flightplan and don't go into the Menu>Departure page. I found the best option for me, since I use a dedicated joystick for the steering tiller, is to connect it to the "spoilers" in FSUIPC, then go into the Majestic control panel and set the steering tiller up as "spoilers" per the instructions in the manual.
- 10 replies
-
- dash8
- dash8-q400
-
(and 3 more)
Tagged with: