Hello dear PMDG. I have a question to you about using one of the levar of CH Throttle as a spoiler. I can move spoiler but I can't arm it with this levar. Is there any possibility of calibration to make arming of spoiler with CH Throttle ?Best regardsP.S.Will PMDG MD-11 works fine with CH products? ;)

Purchase FSUIPC and use that for the axis calibration and control. Works wonders.Would say CH products are fine though. I had the complete set and they barely lasted a year before wearing out. I have moved over to Saitek now and they have a much better feel and build. Use FSUIPC to control all axises and FS does not get to see the axis at all. You can set what you like for each individual button, lever, combination, etcJohn Veldthuishttp://www.virtualpilots.org/signatures/vpa475.png

I concur, only adding that it is important to DISABLE the joysticks in FS9- that way FSUIPC controls the whole thing.My CH TQ has worn out after a little over a year as well- so food for thought.Best-Carl F. Avari-Cooper BAW0225http://online.vatsimindicators.net/980091/523.png| XP Pro SP3 with FS-GS System Unification | 2 x APC UPS | Coolermaster Stacker 830 SE | Asus P5E-Deluxe (X48) | e8500 @ 4gHz | Tuniq Tower 120 | EVGA 8800GT 512MB | Sony 40" Bravia XBR | 2 x 1 GB Corsair XMS2 | 500GB Seagate Barracuda 32MB SATA2 | Corsair HX620W PS | CH Products Yoke-Pedals-Throttle Quadrant | Aerosoft 747MCP-EFIS-EICAS |

I have already FSUIPC purchased.I can move the spoiler with the levar but I cannot arm it with this.

I'm talking about arming spoilers in 737NG

Yes, you can set differrent detents in the axis for different functions- enabling arming. Check out:http://fsuipc.simflight.com/beta/CH_Controls_with_FSUIPC.pdfBTW- please sign all posts with your full name, forum rules.Best-Carl F. Avari-Cooper BAW0225http://online.vatsimindicators.net/980091/523.png| XP Pro SP3 with FS-GS System Unification | 2 x APC UPS | Coolermaster Stacker 830 SE | Asus P5E-Deluxe (X48) | e8500 @ 4gHz | Tuniq Tower 120 | EVGA 8800GT 512MB | Sony 40" Bravia XBR | 2 x 1 GB Corsair XMS2 | 500GB Seagate Barracuda 32MB SATA2 x2 (Acronis) | Corsair HX620W PS | CH Products Yoke-Pedals-Throttle Quadrant | Aerosoft 747MCP-EFIS-EICAS |

As mentioned you need to program the detent for it in FSUIPC. I have the first detent set so that it arms in the first part and the rest of the stroke it deploys the speed brake further the further the lever is pulled.John Veldthuishttp://www.virtualpilots.org/signatures/vpa475.png

But which functions are you marking and how many steps are you making during axis assignment?Marek Romanowski

http://fsuipc.simflight.com/beta/CH_Controls_with_FSUIPC.pdfBest-Carl F. Avari-Cooper BAW0225http://online.vatsimindicators.net/980091/523.png| XP Pro SP3 with FS-GS System Unification | 2 x APC UPS | Coolermaster Stacker 830 SE | Asus P5E-Deluxe (X48) | e8500 @ 4gHz | Tuniq Tower 120 | EVGA 8800GT 512MB | Sony 40" Bravia XBR | 2 x 1 GB Corsair XMS2 | 500GB Seagate Barracuda 32MB SATA2 x2 (Acronis) | Corsair HX620W PS | CH Products Yoke-Pedals-Throttle Quadrant | Aerosoft 747MCP-EFIS-EICAS |

I wasn't askong about calibration of all CH Throttle, but just for spoiler (here I can read about calibration of engines, mixture etc.) Should I mark "Spoiler Arm On" or just "Spoiler Arm set" etc.? I'm calibrating it but green light don't want to turn on.Marek Romanowski

Marek:You can select the axis you want (just like the throttle) and then set the correct detents so you can arm, flight raise or fully deploy as you wish.Choose axis assignment and then calibration in the separate tabs- make sure your joysticks are DISABLED in FS!Best-Carl F. Avari-Cooper BAW0225http://online.vatsimindicators.net/980091/523.png| XP Pro SP3 with FS-GS System Unification | 2 x APC UPS | Coolermaster Stacker 830 SE | Asus P5E-Deluxe (X48) | e8500 @ 4gHz | Tuniq Tower 120 | EVGA 8800GT 512MB | Sony 40" Bravia XBR | 2 x 1 GB Corsair XMS2 | 500GB Seagate Barracuda 32MB SATA2 x2 (Acronis) | Corsair HX620W PS | CH Products Yoke-Pedals-Throttle Quadrant | Aerosoft 747MCP-EFIS-EICAS |

I already assigned the spoiler and Arm mode works in all aircrafts except Boeing 737NG From PMDG