r4d

[Guest mokkum]

after a long wait I received the disk. However after reading thestart up instructions and then changing over the cfg filesto easy steering I am unable to keep the planes on the runwayand generate enough speed to take off.I use a joy stick. What is wrong?

[Dark Moment 0]

Hi MokkumWelcome to a unique club! You won't regret your purchase, I am sure.However, we've got to get you going first. Are you having this problem only with the MAAM-SIM aircraft, or with others too? If the latter, it sounds as though your joystick may need calibrating or the sensitivities adjusting.If the former, then we'll need to know a bit more about your settings. Are you attempting takeoff at an airport near sea level, or higher? Have you checked that your prop levers are fully forward (i.e. the props are in max pitch?). Mixture set to full rich? Have you checked your fuel and payload? You need to do this as the aircraft is overweight by default and you must reduce one or the other as with the real aircraft. That is, you should reduce her weight...... she will take off eventually when overloaded, but you'll need a lot more runway!Finally, bear in mind that DC-3s do not rotate sharply like a modern jet. When you get her to 80-85 knots, gentle back pressure will lift her gently from the runway. Then gear up, maintain climb until 105 knots is achieved, nose down a tad and reduce MAP to 36" for the next stage of climb.Let us know how you get on or, as I say, post some more details about your configuration when starting off.MarkMark "Dark Moment" Beaumont[a href=http://www.swiremariners.com/cathayhk.html" target="_blank]http://www.swiremariners.com/newlogo.jpg[/a]

[Guest mokkum]

Hi Mark:This airplane has me completely baffled. My joystick works fine withmy entire stable except the Maams. I have full rich mix,max prop rpm andno load settings with full realism settings for theplane.She won't steer on the ground and won't turn in the air after slewing her up. The stickcontrols won't move any of the wing and tail control surfaces.Help!!!!!Mokkum

[Dark Moment 0]

I'm guessing it has something to do with that CFG file. Can you wing the one you are using over to me for a look? MABeaumont@aol.com is the address.I'm stalling, really ;-) ... I can't think what's up. But a look at that might help.Mark "Dark Moment" Beaumont[a href=http://www.swiremariners.com/cathayhk.html" target="_blank]http://www.paxship.com/maamlogo2.jpg[/a]

[Guest allcott]

>Hi Mark:>>This airplane has me completely baffled. My joystick works>fine with>my entire stable except the Maams. I have full rich mix,max>prop rpm and>no load settings with full realism settings for theplane.She>won't steer on the ground and won't turn in the air after>slewing her up. The stick>controls won't move any of the wing and tail control>surfaces.>>Help!!!!!>>Mokkum>You haven't got the autopilot on from a previous simming session, by any chance?Allcott

[rambow 0]

I'll bet that's it, Allcott. :-) Mokkum, hit the Z key and see if your problems go away.Bill RambowMAAM-SIM http://www.fssupport.com/maam/maamsim_neon.gif

[Guest mokkum]

Thanks guys:I am so embarrased!! That was it. She now flies as intended.Gratefully Mokkum

[Guest allcott]

Hey, we've all been there.Well I haven't, of course, but I heard from a friend that he had a friend who had etc. etc. (coff!)(-:Allcott

[Dark Moment 0]

Yeah, right, Alcott .... :-hahBut you da man. The AP thing wouldn't have occurred to me, for a while at least! Mind you, not being one to land on AP, I've never left it on!Mark "Dark Moment" Beaumont[a href=http://www.swiremariners.com/cathayhk.html" target="_blank]http://www.paxship.com/maamlogo2.jpg[/a]