Hello everyoneI ran into some problems with my RFP/Posky 742 while using FSPax and the pushback from AES.Everytime i finish my pushback with AES while loaded by FSPax i crash.The plane just sinks through it's nosewheel and get a crash message from FSPax.I think it may have to do with the nosewheel contact point in the Aircraft.cfg as the crash occurs when AES disconnects the pushbacktruck,but i'm a complete newb when it comes to editing those parameters.Would someone who is also using this combo post his contactpoints or maybe some tips so that i can prevent this from happening?My current contactpoints are:[contact_points]point.0=1, 76.8, 0.0, -14.013, 1574.8, 0.000000, 5.826899, 70.0 ,0.300, 1.000, 0.880, 14.000000, 14.000000, 0.000000, 0.000000, 0.000000point.1=1, -15.5, -17.3, -15.983, 1574.8, 1.000000, 5.826899, 6.0 ,2.602, 1.000, 0.651, 18.000000, 18.000000, 2.000000, 0.000000, 0.000000point.2=1, -15.5, 17.3, -15.983, 1574.8, 2.000000, 5.826899, 6.0 ,2.602, 1.000, 0.651, 18.000000, 18.000000, 3.000000, 0.000000, 0.000000point.3=2, -70.7, -102.0, 6.0, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 0.000000, 0.000000point.4=2, -70.7, 102.0, 6.0, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 6.000000, 0.000000, 0.000000point.5=2,-126.6, 0.0, 5.8, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 9.000000, 0.000000, 0.000000point.6=2, 66.8, 0.0, 5.8, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 4.000000, 0.000000, 0.000000static_pitch=1.0static_cg_height=13.625gear_system_type=0This is really frustrating as the 742 is my main plane i fly in FS,and now i'm pretty grounded due to this problem!Would be very thankfull if someone could help me out here!:)Regards,Steven

Open your FS, load up a scenery with the 742 then open then go to the settings of the aircraft parameters in AESHelp and click the repair for push button. Then reload your 742 and it should work.

Hi Stevenno problems here, but I have slightly different contact points. Maybe you could try my set ?[contact_points]point.0=1, 66.8, 0.0, -14.7, 1574.8, 0.000000, 5.826899, 70.0 ,0.800000, 1.200000, 0.900000, 14.000000, 14.000000, 0.000000, 0.000000, 0.000000point.1=1, -20.5, -17.3, -15.2, 1574.8, 1.000000, 5.826899, 23.0 ,1.000000, 1.300000, 0.900000, 18.000000, 18.000000, 2.000000, 0.000000, 0.000000point.2=1, -20.5, 17.3, -15.2, 1574.8, 2.000000, 5.826899, 23.0 ,1.000000, 1.300000, 0.900000, 18.000000, 18.000000, 3.000000, 0.000000, 0.000000point.3=2, -70.7, -102.0, 6.0, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 0.000000, 0.000000point.4=2, -70.7, 102.0, 6.0, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 6.000000, 0.000000, 0.000000point.5=2,-126.6, 0.0, 5.8, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 9.000000, 0.000000, 0.000000point.6=2, 66.8, 0.0, 5.8, 1574.8, 0.000000, 0.000000, 0.000000 ,0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 4.000000, 0.000000, 0.000000//AES Orgvalue:static_pitch=1.00static_pitch=-.16//AES Orgvalue:static_cg_height=14.00000static_cg_height=14.13gear_system_type=0Mike

Thnx for the help guys!Seems to work again!:DI'm going to do a little testflight on the airports where i had this error,and will report back with results :).Regards,Steven

There is a button in AES when setting up your aircraft that fixes this exact problem.Look right above the save aircraft button there is one there for fixing pushback.Cheers

Works like a charm now!thnx for the help guys!Regards,Steven