Sign in to follow this  
Guest EGLD

Working INI file

Recommended Posts

HiCan someone please post a cut and paste of their working INI file? there seem to be a few versions, none of which work for me, various errors receivedOmit the obvious part of the URL if requiredThanksEGLD

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Many folks have had a go-around with this including myself at first. Fortunately, in TP Beta 3, the DEFAULT ProxyUser.ini works perfectly if you make two small changes: The "figurethisoutyourself" parts of the URLs just need to be replaced with v******e****.net (for Service Exapmple 1) and "g*****.com" (for Service Example 2). Then, under the [TileProxy] heading, remember to remove the # sign from in front of the service you wish to try to activate it. IMPORTANT: Make sure to ADD a # sign to the non-functioning "Acme" example to DE-ACTIVATE it, i.e. so only ONE service remains without a # sign and thus "active".If your careful with these changes everything should work fine. If you have more errors you can most likely rest assured it's not the .ini file. If you've already overwritten or altered your default ProxyUser.ini file, a quick re-install will re-instate it. Finally, for your first flight at least, it's always a good idea to pick an area to fly that has good hi-res coverage where you wish to fly by checking the online versions of the services first to be sure. Then:1. Boot the TP "Load filter driver and run proxyUser" shortcut in your TP/Programs menu. 2. Once it has fully initialized, boot FSX. 3. Load your flight and wait for textures to load, (could take 5-10+ minutes).4. TRY TO HOLD UP JAW FROM REPEATLY FALLING TO FLOOR....

Share this post


Link to post
Share on other sites

Hi,Thanks very much for taking the time to explain thatIt looks better initially, two batches of images seem to download looking at the Tileproxy console, then nothingLeft it for about 20 minutes, no other files appear to download, and FSX stops loading at 31%Any thoughts what might be wrong?Thanks !EGLD

Share this post


Link to post
Share on other sites

A virus scanner or other third party software interfering with the filesystem filter driver?

Share this post


Link to post
Share on other sites

Yes, that did the trick !First reaction - WOW, unbelievable. Literally, this is the best thing I've ever seen in a flight sim. Its far, far better than any VFR product I've ever seenI think anyone who's used Flight Sims over the years will no doubt have considered the possibility that this would be the "Killer Feature" in Flight SimulationSir, you may just go down in Flight Simulation history if you can pull this off with either the support or cooperation of "the big two" who are required to make this possibleI wish you good luck, this will literally change Flight Sim foreverEGLD

Share this post


Link to post
Share on other sites

Just one extra comment - have you considered the possibility of this working in FS9?

Share this post


Link to post
Share on other sites

I see, in fact having seen the UK VFR software running under FS9 and FSX, I totally understand what you are sayingTime to drag myself into the year 2007 I guess !!

Share this post


Link to post
Share on other sites

It could work when running tileProxy in SP1 mode. That is the mode where it relies on the flight sim reading only the resolution (mipmap) of the tile that it is actually interested in.Also you need to set max_lod to 11 and thereby restrict yourself to 256x256 pixel tiles at 4.75m resolution.So you just launch FS9 instead of FSX and hope for the best. you DO need simconnect.dll installed on your machine (meaning FSX should be installed as well).And the phototerrain scenery would have to be manually added to FS9.Christian

Share this post


Link to post
Share on other sites

Hi, Unfortunately my tile proxy don`t work too. I unload all other programs -virus scanner, firewall and all other-, and I use the original INI file with all "Truthan changes" and without.But I receive a scrolling error message:"Error was 6 for transfer...failed to resolve host, retrying..."Can you help me? Sorry for my English..cc747

Share this post


Link to post
Share on other sites

Can you paste your ini file here? it sounds like the domain names are wrong

Share this post


Link to post
Share on other sites

>Can you paste your ini file here? it sounds like the domain>names are wrongOf course (it`s edited, but I try with original too) :[TileProxy]lod_distance=1000sp1_mode=Yessource=Service Example 1source=Service Example 2#source=Acme Globe Service[Acme Globe Service]cache_folder=cache.acmenetwork_module=libnettilemodule_config="server=http://server*.acmeglobe.com|path=/terraintile?pos=%s&v=10|quad=ABCD|balance=0123|agent=Mozilla/4.0 (compatible; The TileProxy Project)"max_lod=13min_level=9max_level=17color_hack=Nocolor_level=0bulk_extend=25[service Example 1]cache_folder=cache.service1network_module=libnettilemodule_config="conn=20|rate=2.0|server=http://a*.ortho.tiles.virtualearth.net|path=/tiles/a%s.jpeg?g=52|quad=0123|balance=0123|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"max_lod=13min_level=9max_level=17color_hack=Yescolor_level=13bulk_extend=50[service Example 2]cache_folder=cache.service2network_module=libnettilemodule_config="conn=20|rate=2.0|server=http://kh*.google.com|path=/kh?t=t%s&n=404&v=17|quad=qrts|balance=0123|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"max_lod=13min_level=5max_level=17color_hack=Nocolor_level=0bulk_extend=50

Share this post


Link to post
Share on other sites

It looks like you might have line breaks in your "module_config" linesIn the first section, after "Mozilla/4." there is a gap between the next piece of dataI know it might be the formatting this forum has applied, but I seem to recall another INI that was pasted here had the same problemIf you look, you will see you have this problem on all the "module_config" lines in each sectionEverything which is enclosed in quotes "" needs to be on one line, open the INI in notepad, turn off "word wrap", and you'll see what I meanThats my guess anyway

Share this post


Link to post
Share on other sites

>>Also you need to set max_lod to 11 and thereby restrict>yourself to 256x256 pixel tiles at 4.75m resolution.> Can you tell me where in fsx.cfg should this line be added and exactly how it reads? Thanks and congratulations again for this awesome addon. Pedro Bach

Share this post


Link to post
Share on other sites

the max_lod setting is part of the proxyUser.INI configuration file inside the TileProxy folder.

Share this post


Link to post
Share on other sites

I copied "TileProxy Photoreal World" to C: root (I have FS2004 in "C:Flight Simulator 9" and added manually all areas to FS9 Scenery(It doesn't name them "World001, 002, etc., but simpply "001"). Changed "max-lod=11" and "SP1_mode=yes". Start TileProxy and then FS9, but it does not connect. Pedro Bach

Share this post


Link to post
Share on other sites

TileProxy (the filter driver and proxyUser.exe) needs to monitor the very drive on which your World folder is. That would be C: in your case. Make sure the load.bat script uses C:In load.bat, you can use set drive=C: which will do the trick. By default the script picks the drive letter on which FSX & TileProxy are installed

Share this post


Link to post
Share on other sites

I have FSX installed on Drive F: on my machine because thats the fastest . Sometimes when I load up the Load.bat tileproxy tries to operate on drive C:, If I allow tileproxy to operate on drive C: it will give me the same repetitive low resolution tile over and over (even though all the nice high res tiles downloaded no problem) and when I come out of FSX to fix it it won't allow me to unload the filter driver as FLTMC.exe is stuck in the process manager and I can't end task. I have to restart the PC to get it back operating on drive F: again.I only have to restart if I run tileproxy on C: then start FSX, If I notice it says Tileproxy is operating on drive C: I can unload and reload the filter driver no problems and it loads up operating on F: no problems. So just make sure Tileproxy is operating on the same drive as your FSX installation.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this