HelloMy 2D main panel when called up in FSX doesn't display the PD and ND screens, there is a hole where I see through to the VC cockpit.I need to use the 2d panels to switch the ranging, map modes etc.This is the case for both series 1 & 2. The switches do work in 2d but the screens are not there and it looks all mixed up and sort of transparent.is there anything I can do?looking for an associated thread but havn't succeededthankyou in advance to any specialists or those who experienced this problemjlmvista 32

reads like you have an install fault -bad installer or didn't follow the VISTA install recommendations on wilco's Abus support pages.suggest you re-download the installer. uninstall the product. review wilco's suggestions. install.feelThere's support forum -http://forum.iemit.comregistration requiredold support forum (one can search but not post) -http://iemit.com/forum--

I'm working off the CD boxed versions plus the SPs. I'll give a reinstall a go and follow carefully instructions, thankyou

This is normal, the 2D panel on the Wilco is split into 2. Shift-1 will bring up the gauges while Shift 2, will bring up the panel frame. So in your case if you do a Shift-1 you should get the gauges back. If you get the gauges without the panel frame do a shift-2. Don't know why they did it this way, Maybe some kind of performance issue if they kept it all one window!

This is normal, the 2D panel on the Wilco is split into 2. Shift-1 will bring up the gauges while Shift 2, will bring up the panel frame.

good catch there tf51d. i suggest cycling views over the <shift><xx>.--

ah right I see how it worksso my problem was a throw back from my fs9 habits, fs9 and fs8 (or fs10) now bring up the VC ad the 2D, I find it very practical .many thanksjlm