issue feelthere Airbus series 2d panel in FSX

[Guest jlm]

HelloMy 2D main panel when called up in FSX doesn't display the PD and ND screens, there is a hole where I see through to the VC cockpit.I need to use the 2d panels to switch the ranging, map modes etc.This is the case for both series 1 & 2. The switches do work in 2d but the screens are not there and it looks all mixed up and sort of transparent.is there anything I can do?looking for an associated thread but havn't succeededthankyou in advance to any specialists or those who experienced this problemjlmvista 32

[scoob 18]

reads like you have an install fault -bad installer or didn't follow the VISTA install recommendations on wilco's Abus support pages.suggest you re-download the installer. uninstall the product. review wilco's suggestions. install.feelThere's support forum -http://forum.iemit.comregistration requiredold support forum (one can search but not post) -http://iemit.com/forum--

[Guest jlm]

I'm working off the CD boxed versions plus the SPs. I'll give a reinstall a go and follow carefully instructions, thankyou

[tf51d 284]

This is normal, the 2D panel on the Wilco is split into 2. Shift-1 will bring up the gauges while Shift 2, will bring up the panel frame. So in your case if you do a Shift-1 you should get the gauges back. If you get the gauges without the panel frame do a shift-2. Don't know why they did it this way, Maybe some kind of performance issue if they kept it all one window!

[scoob 18]

This is normal, the 2D panel on the Wilco is split into 2. Shift-1 will bring up the gauges while Shift 2, will bring up the panel frame.

good catch there tf51d. i suggest cycling views over the <shift><xx>.--

[Guest jlm]

ah right I see how it worksso my problem was a throw back from my fs9 habits, fs9 and fs8 (or fs10) now bring up the VC ad the 2D, I find it very practical .many thanksjlm