I can't make a comment about the J41 without saying first: IT IS AWESOME! This is so much fun: after some flights I feel tired instead of bored. I knew flying turboprops was a bit more busy than the big ones, but man... this is hard work.Ok, now my problem: after a couple of flights to get familiar with the J41 with mouse and joystick, I am now configuring my yoke to work with this plane. With the MD11 this was already quite difficult but with the possibility to add a shortcut to almost every command and with the 2d panels to make macro's with FSUIPC almost everything was doable. To my surprise, in the J41 many of the commands are not programmable to my yoke. Eg altering the autopilot altitude can only be done by mouse clicking. Flying this bird is already quite heavy ( :( ) but with the need to constantly switching between mouse, keyboard and yoke it ain't getting better :( Therefore my question to PMDG: could you please in future products (and maybe already with this one with a patch) provide as much shortcuts as possible for people who use a yoke, throttle quadrants, pedals etc. in conjunction with FSUIPC? That would make life a lot easier! Looking forward to your opinion about this.

In the meanwhile, I post my buttons and axes sections of my FSUIPC4.ini file. Hope someone can use it.

[Buttons]ButtonRepeat=100=P1,0,C65791,0; Autopilot Off1=R1,1,C65588,0; Brakes2=R1,2,C65607,0; Trim Dn3=R1,3,C65615,0; Trim Up4=P1,4,C65759,0; Flap Decr5=P1,5,C65758,0; Flap Incr6=R1,6,C65655,0; Zoom In7=R1,7,C65656,0; Zoom Out8=CP(+1,8)1,14,K50,9; Shift 2 Rampmanager9=P1,15,K51,9; Shift 3 FMS and AP10=CP(+1,8)1,16,C65570,0; Landing Lights Toggle11=CP(+1,8)1,17,C65751,0; Gear Toggle12=CP(+1,8)1,18,K65,8; A Change View13=CP(+1,8)1,19,K65,9; Shift A Change View14=R1,20,C65966,0; Throttle 1 Cut15=U1,20,C65967,0; Throttle 1 Decr16=R1,21,C65971,0; Throttle 2 Cut17=U1,21,C65972,0; Throttle 2 Decr18=CP(+1,9)1,14,C66372,0; Com Radio 1 Swap19=CR(+1,9)1,16,C65637,0; Com Radio 1 Whole Inc20=CR(+1,9)1,17,C65636,0; Com Radio 1 Whole Dec21=CR(+1,9)1,18,C65639,0; Com Radio 1 Fraq Inc22=CR(+1,9)1,19,C65638,0; Com Radio 1 Fraq Dec23=CP(+1,10)1,14,C66448,0; Nav Radio 1 Swap24=CR(+1,10)1,16,C65641,0; Nav Radio 1 Whole Inc25=CR(+1,10)1,17,C65640,0; Nav Radio 1 Whole Dec26=CR(+1,10)1,18,C65643,0; Nav Radio 1 Fraq Inc27=CR(+1,10)1,19,C65642,0; Nav Radio 1 Fraq Dec[Axes]0=1X,256,D,1,0,0,01=1Y,256,D,2,0,0,02=1Z,256,D,9,0,0,03=1U,256,D,10,0,0,04=1V,256,D,5,0,0,0

Keyboard commands are on the list of potential things we'll be adding for the Service Update...

That's great to hear. Thanks for the answer Ryan.