It appears in the manual there is a way to bring up a landing view, but I have yet to find it. Any clues?Noel

Check out page 7-5 of the manual for an explanation of the eyepoint adjustment on the dash.I changed my Panel.cfg to alter my eyepoint slightly. This from my "Views" section:VIEW_FORWARD_DIR=5.2, 0.0, 0.0Default settings are 3.2, 0.0, 0.0

I dont think an eye adjustment has anything to do with a 'landing panel'.If you look in the panel.cfg file you will see the landing panel information there. By default, it has been 'remarked' out by the use of double slashes at the begining of the actual line. Just remove these slashes and you get the landing view panel.good luck

Mike, I removed the slashes, and see no landing view panel. What am I doing wrong?Noel

Nothing. The slashes simply rem the lines of dashes.

here is a portion of my pnl configuration, as you can see I have remarked out my yokes and enabled my landing veiw pnl[Window Titles]Window00=VFR ViewWindow01=IFR ViewWindow02=Overhead Panel LeftWindow03=Overhead Panel RightWindow04=PedestalWindow05=VFR ExtendedWindow06=IFR Extended//Window07=VFR Yoke//Window08=IFR YokeWindow09=CompassWindow10=PFD ZoomWindow11=EHSI ZoomWindow12=EIDS ZoomWindow13=Reality XP 530 GPSWindow14=Landing ViewWindow15=ADF Frequency SelectorWindow16=STEC Remote Selector Zoom[Window14]file=FLIGHT1_MERIDIAN_LDG.bmp size_mm=1024window_size_ratio=1.000 position=7visible=0ident=100nomenu=1gauge00=FLT1PIPERM!STSEL, 77,671,195,89gauge01=FLT1PIPERM!STRMT, 77,563,195,88gauge02=FLT1PIPERM!PFD, 299,485,320,269gauge03=FLT1PIPERM!EIDS1, 676,468,320,269gauge04=FLT1PIPERM!ANL, 903,349,286,87gauge05=FLT1PIPERM!CWM, 836,366,24,20gauge06=FLT1PIPERM!STT, 84,516,17,16gauge07=FLT1PIPERM!TYD, 140,505,30,31gauge08=FLT1PIPERM!APSW, 16,567,50,86gauge09=FLT1PIPERM!YDSW, 16,675,50,86gauge10=FLT1PIPERM!ELT, 203,504,39,39gauge11=FLT1PIPERM!OVTG, 0,373,48,48gauge12=FLT1PIPERM!PETG, 0,470,48,62gauge13=FLT1PIPERM!PAN, 1004,292,20,19gauge14=FLT1PIPERM!LDTG, 0, 421 ,48,48

That's odd, Mike. My Panel.cfg doesn't have the "FLIGHT1_MERIDIAN_LDG.bmp" section in it! It shows the "WINDOW07=VFR Yoke" and "WINDOW08=IFR Yoke" lines at the beginning, but not the LDG.bmp section.Curious as to what sort of install you made for the Meridian in FS9? I d/l the update, not the full 2004 file (which is something like 65Mb). I installed the FS2K2 Meridian into FS9, then applied the update per F1 directions. All works well, I've had no problems with the Meridian.I did look in the Panel folder and saw the LDG.bmp. But no call for it in my Panel.cfg.

Thanks Mike, got it working now :()Noel