August 3, 20169 yr Hi guys, First off many apologies if this isnt in the correct forum, but i have been tearing my hair out for the past week trying to sort this out. Problem im having is no runway or approach lighting at my orbx ymml scenery. Ive had this problem before and fixed it but for the life of me cannot remember how i did! The only thing i can tell you that is diiferent from the last time is that i was running windows 7 home premium. I upgraded my system to windows 10, bought a brand new ssd dedicates solely for p3d and completed a fresh install. Now that the no runway lights problem is back, ive been searching and searching but cannot remember what was done last time. Ive rolled back gpu drivers, played in my cfg, completely deleted all other addons except ftx and ymml. Only thing i cant remember is last time did i play with a object_flow.dll and if so, this time i cannot find it anywhere. What im thinking now is it my windows 10 install? Is anyone else using windows 10 with this? Any help would be appreciated. Cheers, Dan
August 3, 20169 yr Are you using the latest (V2.0) YMML with the P3Dv3-ready installer? Shouldn't need any tweaking in any version of MSFS or P3D with that. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
August 3, 20169 yr Problem im having is no runway or approach lighting at my orbx ymml scenery. Ive had this problem before and fixed it but for the life of me cannot remember how i did! Hello I don't have YMML, but have lots of ORBX payware and all freeware airports. Hope this helps You: Some time ago I found a fix for missing runway lights in some of their airports. The problem was due to setting the runway(s) width to 0.0. (It happened with FSX SP2 setups and apparently still does in P3D) Check the airport BGL file with ADE and look for the runway width, if it is 0.0, Then set it to 0.1 and compile it again. Cheers. Ramón. Time, is the one thing no one can buy.
August 3, 20169 yr Author Cheers guys, Will try both these out when i get home tonight. Not sure if i used the ymml v.20 installer, just used the original zip i had downloaded previously. Ill re download from orbx which should give me the latest correct? In regards to the object_flow.dll does this exist in p3d or am i thinking of when i use to fly fsx? Thanks
August 4, 20169 yr In regards to the object_flow.dll does this exist in p3d or am i thinking of when i use to fly fsx? Yes it does. It handles many ORBX features. Central makes sure it is present in Prepar3D.cfg every time you run it. But be careful, there is a bug in the Current central that duplicates some object_flow.dll's if You have certain airports. (Check the forums to see which ones) Cheers. Ramón. Time, is the one thing no one can buy.
August 4, 20169 yr One other thing...make sure there is no YMML-specific ObjectFlow.dll in your dll.xml...the versions before 2.05 (which is the current quadruple-installer version labelled as 2.0 in the file name) did have one...they have gone to a unified ObjectFlow module. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
August 4, 20169 yr Author Thanks heaps guys. Sadly still no go. Im currently re-downloading orbxFTXAUSSP4003 and OrbxFTXYMML200 from where i purchased. Going to try a reinstall again. Just for a double check can i ask what drivers you guys are using? Im currently trying 358.91 for my nvidia gtx980 on win10. No luck Out of curiosity, it wouldnt have anything to do with my simconnect would it? I run asn and proatc-x on my laptop via simconnect Thanks
August 5, 20169 yr I'm using 368.81 on a pair of GTX980Ti GPUs in SLI on Win 7. Not likely going to be a Simconnect issue. Also, make sure you have installed the latest ORBX libraries. Have you tried posting on the ORBX forums? Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
August 6, 20169 yr Author I'm using 368.81 on a pair of GTX980Ti GPUs in SLI on Win 7. Not likely going to be a Simconnect issue. Also, make sure you have installed the latest ORBX libraries. Have you tried posting on the ORBX forums? Regards Thanks for the reply, Still tackling this one. Yes latest libraries were installed which i believe latest ones were released on the 7th or there abouts. I havent posted there yet but my god have i spent countless hours reading through it trying every fix that is suggested. Ive even emailed ORBX but no response yet. Ive just bit the bullet, formatted both my ssd's and am going to start a fresh p3d install again. Will keep you guys informed, thanks heaps for the help. Just ordered a Virtualavionics mcp and a mip+overhead from flightsimparts.com hope i can fix this ymml issue before i start building. Pictures and threads will be coming soon guys haha
August 8, 20169 yr Author Heres the latest guys. Fresh install of p3d, like im talking no other game, program nothing. Have then ibstalled in order ftxau, orbx libraries then ftxymml. Still no joy. Using graphics driver 358.91 Its gotta be windows 10? This is getting so frustrating. Whens orbx's new ymml being released? Fingers crossed dont have the same problem
August 8, 20169 yr Author Think i may be onto something guys. I just noticed now, before i did the new install on my new ssd i had 3 folders for p3d. P3d, p3dv2 and p3dv3. Ive just noticed i no longer have the p3d and p3dv2 files
August 8, 20169 yr Author Also i keep forgetting to mention, i have the green taxiway lighting and papi lights, however no runway or approach lighting..
August 10, 20169 yr YMML v3 just released (10 AUSD upgrade for current owners) so maybe that'll fix your problems... Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
Create an account or sign in to comment