Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

approach, and landing

Featured Replies

Hello everyone,

Im pretty new around here and I hope my question will not sound too dumb. 

I recently had a 747 v3 and I handle it as best as I can but I have an issue with my FMC i configured it normally with my route, departure airport arrival airport runways ... but my aircraft at one stage let say I'm level FL15 at waypoint A , and need to descend level FL10 at waypoint, well my aircraft will stay stuck at level FL15 but the speeds chance lets say i'm 250 at WP A and asked for 220 at WP B it will change.

 

I dont know what I configured incorrectly.

 

If you guys have any idea dont hesitate to let me know.

 

Cheers

 

Clement.

Edited by Ray Proudfoot
As requested the full name of the poster has been removed.

Hi Clement,

The FD will command the change of level depending on the flight level in the FMCand the altitude entered in the MCP altitude box.

Look at your FMA to check in which pitch mode you are. 

Let's imagine in your case that your are proceeding from your position to the waypoint A with an altitude constraint of FL150, then waypoint B with an altitude constraint of FL100.

So if you start with a pitch mode of VNAV PTH or VNAV SPD in your descent and 15000 on the MCP, your aircraft will level off at FL150 and the pitch mode will change to VNAV ALT. In this case, if you just enter 10000 on the MCP, then the FD will still command a level off even if the constraint of the next waypoint is FL100. To continue the descent, you have to push the altitude button of the MCP.

However, in the same situation, if you enter 10000 on the MCP before the aircraft starts levelling off, then the pitch mode with remains VNAV PTH. The FD will command a pitch to pass Waypoint A at FL150 (even level off for while if needed) then continue the descent to FL120 once waypoint A is passed.

The key here is to understand how the system works and know where you are in terms of VNAV mode to know what to expect.

Romain Roux

204800.pngACH1179.jpg

 

Avec l'avion, nous avons inventé la ligne droite.

St Exupéry, Terre des hommes.

  • 6 years later...
  • Moderator

@Clem Corky, I have edited your post and removed your full name. I trust that is acceptable.

Ray (Cheshire, England).

System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant.

Cheadle Hulme Weather website.

chlive.php

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.