September 6, 20187 yr Hi. I'd like to say I've tried everything, however, if I had, I sure I'd have got this working. I d/l RXP GTN650 yesterday for FSX. Initially, after encountering all of the 404 issues, I finally got it installed. I've previously been using RXP 430 sim trainer with no issues what so ever, and it worked great. However, I can not for love nor money get the 650 to show up on my aircraft!! I thought there might be the same little config app that the 430 uses - the one you just assign the the unit to an a/c, position it on the screen.....and you're done, but no, not this one. Anyway, the user manual was no help. I just don't know where I'm going wrong, and or if I've done anything right..... Any held would be gratefully received. Herc
September 6, 20187 yr Hi Herc, First and foremost, we've just release v2.5.4 update compatible with the latest GTN trainer 6.50. You might want to give it a try a little later if you prefer, time to iron out any potential issue which may surface in the first few days. Otherwise, for the 'how-to' question: User's Manual p4 | Getting Started | Add-Ons Menu. It is illustrated and should get you started in the right direction!
September 6, 20187 yr Author Thanks for your reply. Ok, finally got this all sorted. Turns out it was an SP issue, that I've now resolved. Unfortunately, now I have another issue instead. After about 5 mins or so of running fine the GTN650 goes 'black' with the word Starting in the lower left corner........ Any ideas on this one?
September 6, 20187 yr 2 hours ago, Hercfeend said: Turns out it was an SP issue, that I've now resolved. Can you please detail a little more so that this could help other customers encountering a similar situation? 2 hours ago, Hercfeend said: After about 5 mins or so of running fine the GTN650 goes 'black' with the word Starting in the lower left corner Can you please check the content of the RXP logs? (see User's Manual for file/path). Also can you cross check your anti-virus 'quarantined' files for any 'rxp' file?
September 7, 20187 yr Author Thanks for the reply. OK, the SP issue was that I hadn't installed it - SP2 that is. My bad!! Once installed, I got the option to add/configure the 650 on the aircraft screen. Unfortunately, the Black screen of death issue is still happening though. It's fine one minute......and then poof! Black, Starting......... and nothing again. rxpGTN.gau.log 8/09/07 04:08:05.878 08260 - ] # rxpGTN.DLL version 2.5.3.0 18/09/07 04:08:05.878 08260 INFO ] rxpGtnSim.dll.log 18/09/07 04:08:06.203 08260 - ] # rxpGtnSim32.dll version 2.5.3.0 18/09/07 04:08:06.203 08260 INFO ] 18/09/07 04:08:07.927 14496 INFO ] rxpGTN_menu.dll.log 18/09/06 19:44:02.881 11424 - ] # rxpGTN_menu.dll version 2.5.2.0 18/09/06 19:44:02.886 11424 INFO ] edit panel: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\C172\panel\panel.cfg I can confirm there are no quarantined files in my Avast Virus Chest. Just saying, the RXP G430 I had worked great, and I never had any issues with it. So far, I've spent more time trying to get the GTN650 working than actually using it.......
September 7, 20187 yr Author FYI If you think it will help. I read somewhere that there had been some issues with drivers. ------------------ System Information ------------------ Time of this report: 9/7/2018, 16:29:48 Machine name: DEATHSTAR Operating System: Windows 10 Pro 64-bit (10.0, Build 17134) (17134.rs4_release.180410-1804) Language: English (Regional Setting: English) System Manufacturer: Dell Inc. System Model: Latitude 5580 BIOS: 1.0.0 (type: UEFI) Processor: Intel(R) Core(TM) i7-7600U CPU @ 2.80GHz (4 CPUs), ~2.9GHz Memory: 8192MB RAM Available OS Memory: 8020MB RAM Page File: 8890MB used, 3097MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 12 DX Setup Parameters: Not found User DPI Setting: 96 DPI (100 percent) System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled Miracast: Available, with HDCP Microsoft Graphics Hybrid: Not Supported --------------- Display Devices --------------- Card name: Intel(R) HD Graphics 620 Manufacturer: Intel Corporation Chip type: Intel(R) HD Graphics Family DAC type: Internal Device Type: Full Device (POST) Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER] Device Problem Code: No Problem Driver Problem Code: Unknown Display Memory: 4138 MB Dedicated Memory: 128 MB Shared Memory: 4010 MB Current Mode: 1366 x 768 (32 bit) (60Hz) HDR Support: Not Supported Display Topology: Internal Display Color Space: DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709 Color Primaries: Red(0.569836,0.332531), Green(0.328625,0.581555), Blue(0.159680,0.141125), White Point(0.313977,0.329602) Display Luminance: Min Luminance = 0.500000, Max Luminance = 270.000000, MaxFullFrameLuminance = 270.000000 Monitor Name: Generic PnP Monitor Monitor Model: unknown Monitor Id: CMN15C5 Native Mode: 1366 x 768(p) (60.003Hz) Output Type: Internal Monitor Capabilities: HDR Not Supported Display Pixel Format: DISPLAYCONFIG_PIXELFORMAT_32BPP Advanced Color: Not Supported Driver Name: C:\WINDOWS\System32\DriverStore\FileRepository Driver File Version: 22.20.0016.4836 (English) Driver Version: 22.20.16.4836 DDI Version: 12 Feature Levels: 12_1,12_0,11_1,11_0,10_1,10_0,9_3,9_2,9_1 Driver Model: WDDM 2.2 Graphics Preemption: Triangle Compute Preemption: Thread Miracast: Supported Hybrid Graphics GPU: Integrated Power P-states: Not Supported Virtualization: Not Supported Block List: No Blocks Catalog Attributes: N/A Driver Attributes: Final Retail Driver Date/Size: 17/10/2017 12:00:00, 65449872 bytes WHQL Logo'd: Yes WHQL Date Stamp: Unknown Device Identifier: {D7B78E66-1A56-11CF-7C61-B827B9C2DB35} Vendor ID: 0x8086 Device ID: 0x5916 SubSys ID: 0x07A81028 Revision ID: 0x0002 Driver Strong Name: oem20.inf:5f63e534fccdbc6c:iKBLD_w10_DS:22.20.16.4836:pci\ven_8086&dev_5916&subsys_07a81028 Rank Of Driver: 00D10001 Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_C ModeVC1_C VideoProcess_AlphaBlend D3D9 Overlay: Supported DXVA-HD: Supported DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled MPO MaxPlanes: 1 MPO Caps: Not Supported MPO Stretch: Not Supported MPO Media Hints: Not Supported MPO Formats: Not Supported PanelFitter Caps: Not Supported PanelFitter Stretch: Not Supported
September 7, 20187 yr Thank you for the detailed information. It seems you are running a configuration with a 'limited' graphics card, but this shall be enough unless too many applications are drawing resources out of it at the same time. Can you please try the following: 1) locate the RealityXP.GTN.ini file in the folder where the aircraft you are flying with is located. 2) open this file with notepad.exe 3) locate the section starting with [GTN_650_1] 4) right below it, and prior the other lines in the form of name = value, add the following lines: DebugValue = 1 LogTrainer = 1 These are documented in User's Manual p18.
September 7, 20187 yr Author OK, done that. Here is what the log spat out between starting up and the screen going black. 18/09/07 22:38:48.672 12188 - ] # rxpGtnSim32.dll version 2.5.3.0 18/09/07 22:38:48.671 12188 INFO ] 18/09/07 22:38:50.312 06436 INFO ] 18/09/07 22:38:51.017 12588 INFO ] GFX Debug: enabled. 18/09/07 22:39:46.648 12588 INFO ] GTN: 905297932 002a -44 cht_intf.c (1795): CDP 18/09/07 22:39:58.876 12588 INFO ] GTN: 905297932 002a -44 cht_intf.c (1795): CDP 18/09/07 22:40:02.959 12588 INFO ] GTN: 905297932 002a -44 cht_intf.c (1795): CDP And here's another. 18/09/07 22:46:47.780 02664 - ] # rxpGtnSim32.dll version 2.5.3.0 18/09/07 22:46:47.779 02664 INFO ] 18/09/07 22:46:49.323 02880 INFO ] 18/09/07 22:46:50.018 06436 INFO ] GFX Debug: enabled. 18/09/07 22:47:20.329 06436 INFO ] GTN: 905298363 002a -44 cht_intf.c (1795): CDP I'm not running anything else in the background, and have the ALL of the FSX setting on MINIMUM (I'm just using this for IFR training).
September 7, 20187 yr Hi, it looks like there is a problem of some sort with the 'charts'. You are also not running the latest GTN v2.5.4. I'd suggest the following then: 1) download the latest Reality XP GTN 750 e-commerce installer from our website. 2) select "re-install" with your purchase key/password. 3) once unwrapped and the RXP installer runs, select the correct options and let it download and run the latest GTN Trainer v6.50. 4) select GTN (at least, but another customer has reported it required installing TXi and GDU as well for the GTN to run) 5) keep the extra entries in the ini file and see how it goes this time with the lastest RXP GTN and the latest GTN Trainer.
September 7, 20187 yr Author Did you mean d/l GTN750? This issue is for the GTN650 I can't install/re-install 750 as my key isn't valid for that product.
September 8, 20187 yr Sorry, yes of course, I should have written GTN 650 instead because this is the product you have.
September 8, 20187 yr Author OK.....did that! Now all I'm getting is a black screen, and the following log file. I just installed let the Garmin install in the default directories, so I have no idea why this is happening!! 18/09/08 04:26:38.015 03212 - ] # rxpGtnSim32.dll version 2.5.3.0 18/09/08 04:26:38.014 03212 INFO ] 18/09/08 04:26:38.919 03212 WARN ] can't find trainer installer path I'm going to be honest, I'm pretty much at the end of my tether with this thing now. I bought this app 3-4 days ago, and it wasn't cheap ($75NZD). I bought it because the RPX 430 worked just great. Unfortunately, I have spent the best part of the time since buying the 650..... well......far***g about with config files, debug code etc etc. I have installed and uninstalled the app, and all of the Garmin extras more times than I care to remember now, and it's got me nowhere! I still have the same issue I've been having all along. The unit starts, then within a minute 'freezes' (or goes black) - typically now though it's just freezing i.e. the display is still visible, but it is unresponsive to inputs. Logs 18/09/08 10:19:18.064 08692 - ] # rxpGtnSim32.dll version 2.5.4.0 18/09/08 10:19:18.063 08692 INFO ] 18/09/08 10:19:19.562 11608 INFO ] 18/09/08 10:19:20.095 12304 INFO ] GFX Debug: enabled. 18/09/08 10:19:17.707 08692 - ] # rxpGTN.DLL version 2.5.4.0 18/09/08 10:19:17.707 08692 INFO ] I will add one thing that I can't explain, that might be of significance, or not. When I try and run any of the Navigators with the Garmin Aviation Trainer app they will not poser up. I press the Power On at the bottom right and it just cycles through Power Up, Powered Up and Power Down, Powered Down! Any ideas. The GTN trainers (that pop up the throttle etc) all work just fine. Lets's give this one more go - Look forward to hearing your ideas.
September 8, 20187 yr Hi, I'm sorry for the unsatisfactory out-the-box experience. It is smooth a process for most our customers, there are just sometimes system configurations which are not cooperative. Hopefully, with our help and your assistance, we'll certainly find out what is causing this. This might just be a out of place a system configuration which will also positively affect your day-to-day computer operation. First of all, you might want to review your system. A quick tour on the Dell website shows your system is not up to date (Bios is now 1.11.1, Video is 24.20 - you are 2 versions behind etc...) Also, if your laptop has both Intel HD graphics and nVidia graphics, you might want to find the way to 'forcefully' use the nVidia discrete chipset whenever you run FltSim and the Garmin trainer. Unlike desktops, laptops are not meant for gaming unless you properly configure them for it. Let's start in making sure you update your machine drivers to the latest first:https://www.dell.com/support/home/au/en/aubsd1/product-support/product/latitude-15-5580-laptop/drivers
September 10, 20187 yr Author Thanks Jean-Luc I had a suspicion it might be to do with the graphics drivers after I read a few other posts, so I updated them before seeing your post. I seems that it might have done the trick although I haven't had the opportunity to test fully. After reading your post I just updated everything anyway...... Fingers crossed. (If you don't hear from me again assume all is well with the world 😉 )
Archived
This topic is now archived and is closed to further replies.