September 24, 20187 yr Hello, just two clarifications on the NGX, please, I am unsure whether the following two issues are normal: 1- The WXR test pattern is missing. During radar test, ND labels and voice announcements are OK, but no pattern is displayed after them. This was checked under various conditions (DC and AC On, EFIS WXR button On, no other WXR function active, then each function selected in turn). WXR works perfectly with Active Sky. 2- When Xponder is set to TA/RA, ND displays TA ONLY (as for the TA Only position). Thank you for your help, Giorgio Giorgio Goggi
September 24, 20187 yr Commercial Member 6 hours ago, goggi said: 1- The WXR test pattern is missing. During radar test, ND labels and voice announcements are OK, but no pattern is displayed after them. This was checked under various conditions (DC and AC On, EFIS WXR button On, no other WXR function active, then each function selected in turn). WXR works perfectly with Active Sky. Unsure of this one. I'd need to see it in the sim. 6 hours ago, goggi said: 2- When Xponder is set to TA/RA, ND displays TA ONLY (as for the TA Only position). It will display this in certain conditions (on ground, on final, etc). It automatically sets this so that two transponders won't try to negotiate a solution that's unworkable (a plane on final can't maneuver very quickly, or descend away; a plane on the ground really isn't in the position to climb or descend to get away, etc.). Kyle Rodgers
Archived
This topic is now archived and is closed to further replies.