Yesterday I did a flight with V3.4. I noticed that the barber pole did not indicate M.86 as it should(I was at FL370) but M.84. Overall, that's already a very nice plane and after these small tweakings a must have!

Cheers

I completed just now another flight(V3.5 in P3D4)and I noticed that the barber pole doesn't indicates the VMO(350 and 370 above 10000'). I got an overspeed alarm climbing at FL370 passing 350 with M.82. MMO indication at these levels is wrong(.84 instead of .86)

We fixed this issue by making the length of the upper mach scale more spread out. This fixed the calibration. Also we had the speed reference info wrong. This was also updated. Now you will see the barber pole at 370 knots until you reach mach .86

Cruise speed is now indicated 468 knots for FL370

max mach .86

max indicated increases in linear manner from 350 to 370 KIAS between sea level and 10K.  (We are not simulating between sea level and 10k) And from 10K to 25K is 370 KIAS. Above that is 0.86 mach.

4 hours ago, Flysimware said:

We fixed this issue by making the length of the upper mach scale more spread out. This fixed the calibration. Also we had the speed reference info wrong. This was also updated. Now you will see the barber pole at 370 knots until you reach mach .86

Cruise speed is now indicated 468 knots for FL370

max mach .86

max indicated increases in linear manner from 350 to 370 KIAS between sea level and 10K.  (We are not simulating between sea level and 10k) And from 10K to 25K is 370 KIAS. Above that is 0.86 mach.

Excellent! Thank you for your hard work

Cheers