December 9, 20187 yr Will the Alabeo PA31 Chieftain need an update for P3Dv4.4? Below I list the Content error log for the default P3D F22 and then the log for the PA31 Chieftain: Content error log for the default P3Dv4.4 F22: ********************************************** [error.0] error=Payload station indexes should be between 1 - 1 Content error log examples (not a complete list) for the Alabeo PA31 Chieftain: ******************************************************************************* [error.0] error=Gauge/Script Error Type: Gauge Name: Control_windows Error: Missing gauge image file: PA31350\cruz.bmp [error.1] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (no command is more than 4 characters): "//-------------MAP PAGES DEFAULTS------------------------// 8 (>L:EX500_MapRange, enum) //Startup Map Range [0-1nm, ... 5-20nm, ... 10-100nm, ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_ [error.2] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (no command is more than 4 characters): "PAGES DEFAULTS------------------------// 8 (>L:EX500_MapRange, enum) //Startup Map Range [0-1nm, ... 5-20nm, ... 10-100nm, ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_MapTraffic, enum) [error.3] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (no command is more than 4 characters): "DEFAULTS------------------------// 8 (>L:EX500_MapRange, enum) //Startup Map Range [0-1nm, ... 5-20nm, ... 10-100nm, ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_MapTraffic, enum) //Tra [error.4] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (no command is more than 4 characters): "//Startup Map Range [0-1nm, ... 5-20nm, ... 10-100nm, ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_MapTraffic, enum) //Traffic Displayed [0-Off, 1-Above, 2-Normal, 3-Unlimited, 4-Below] 2 [error.5] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "Map" in: Map Range [0-1nm, ... 5-20nm, ... 10-100nm, ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_MapTraffic, enum) //Traffic Displayed [0-Off, 1-Above, 2-No [error.6] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (no command is more than 4 characters): "Range [0-1nm, ... 5-20nm, ... 10-100nm, ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_MapTraffic, enum) //Traffic Displayed [0-Off, 1-Above, 2-Normal, 3-Unlimited, 4-Below] 2 (>L:EX500_Map [error.7] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (no command is more than 4 characters): "[0-1nm, ... 5-20nm, ... 10-100nm, ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_MapTraffic, enum) //Traffic Displayed [0-Off, 1-Above, 2-Normal, 3-Unlimited, 4-Below] 2 (>L:EX500_MapOrient [error.8] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "..." in: ... 5-20nm, ... 10-100nm, ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_MapTraffic, enum) //Traffic Displayed [0-Off, 1-Above, 2-Normal, 3-Unlimited, [error.9] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "..." in: ... 10-100nm, ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_MapTraffic, enum) //Traffic Displayed [0-Off, 1-Above, 2-Normal, 3-Unlimited, 4-Below] [error.10] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "..." in: ... 15-500nm, ... 18-1500nm] 2 (>L:EX500_MapTraffic, enum) //Traffic Displayed [0-Off, 1-Above, 2-Normal, 3-Unlimited, 4-Below] 2 (>L:EX5 [error.467] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "w/" in: w/ Lbl] 1 (>L:EX500_DeclutterVictorIFR, enum) //Victor Airways Shown [0-Off, 1-Auto, 2-On] 0 (>L:EX500_DeclutterJetIFR, enum) //Jet Shown [error.468] error=Gauge/Script Error Type: Gauge Name: EX500_config Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): "Lbl]" in: Lbl] 1 (>L:EX500_DeclutterVictorIFR, enum) //Victor Airways Shown [0-Off, 1-Auto, 2-On] 0 (>L:EX500_DeclutterJetIFR, enum) //Jet Shown [ [error.671] error=Gauge/Script Error Type: Gauge Name: g600_configPA31350 Error: Invalid script (no command is more than 4 characters): "[1-yes, 0-no] 0 (>L:G500_MFDMap2Topo, bool) //Display topography on Map Page 2 [1-yes, 0-no] 0 (>L:G500_MFDMap1TopoScale, bool) //Display topography scale on Map Page 1 [1- [error.672] error=Gauge/Script Error Type: Gauge Name: g600_configPA31350 Error: Invalid octal value: "0-no] 0 (>L:G500_MFDMap2Topo, bool) //Display topography on Map Page 2 [1-yes, 0-no] 0 (>L:G500_MFDMap1TopoScale, bool) //Display topography scale on Map Page 1 [1-yes, 0-no] 0 (>L:G500_MFDMap2Topo [error.804] error=Gauge/Script Error Type: Gauge Name: g600_configPA31350 Error: Invalid script (no command is more than 4 characters): "speed with critical engine inoperative 236 (>L:G500_Vne, knots) //Never exceed speed 185 (>L:G500_Vno, knots) //Maximum structural cruising speed 162 (>L:G500 [error.929] error=Gauge/Script Error Type: Gauge Name: g600_configPA31350 Error: Invalid script (no command is more than 4 characters): "//Range [0-2.5, 1-5, 2-10, 3-20, 4-40, 5-80, 6-160, 7-320] 0 (>L:EX500_AzimuthLines, bool) //Azimuth Lines [0-off, 1-on] 4 (>L:MFD_WEATHER_ZOOM) 0 (>L:MFD_WEATHER_TI Best Regards, Vaughan Martell PP-ASEL KDTW
Archived
This topic is now archived and is closed to further replies.