Hi,

new to LINDA I have a problem with my Saitek Pro Flight switches.

After I deleted all assignments in P3D, I created a default scheme now I would like now to access the Dash8 specific functions.
Controlling the landing lights, beacon, strobe and transponder with a switches from my joystick would be perfect.

Installed is P3D v4, LINDA v3.0.9 and the Majestic Dash 8 Q-400 module v2.6.

As it seems in LINDA everything is well configured: When I press a switch I see it in the joystick config ui with the assigned action and in the console output the button id and a bitmap, but in my simluator cockpit nothing happens.
Only the default FSX commands seems to work.

I reloaded the LUA engine and restarted the sim.

Whats wrong?

Thank you.

Here is my start log:

 

ConfigSysSave() completed
ConfigSysLoad() completed [DEFACFT=  Majestic Dash 8 Q-400]
ConfigSysLoad() completed [DEFDEV=255]
ConfigSysLoad() completed [FSXSYNC=1]
ConfigSysLoad() completed [GLOBAL=0]
ConfigSysLoad() completed [DEBUG=3]
ConfigSysLoad() completed [SAITEK=1]
ConfigSysLoad() completed [VAS=1]
ConfigSysLoad() completed [RUNAWAY=1]
hidSysConfigLoad() complete
hidConfigDftLoad complete
hidConfigLoad() complete
hidConfigReload successful
HIDSwitchDevice 1
GUIDs returned for product: VID_1234&PID_BEAD:
GUID= {DD0A3880-35FE-11E8-8002-444553540000}
Details: Btns=6, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U32767,V0,X32767,Y32767,Z32767
Product= Saitek Pro Flight Yoke
Manufacturer= Saitek
Vendor=06A3, Product=0BAC (Version 3.0)
GUIDs returned for product: VID_06A3&PID_0BAC:
GUID= {F4E5FFB0-9053-11E9-8001-444553540000}
Details: Btns=23, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U255,V255,X1023,Y1023,Z255
-------------------------------------------------------------------
Device acquired for use:
Joystick ID = 0 (Registry okay)
0=SideWinder Force Feedback 2 Joystick
0.GUID={3534E650-2FDC-11E8-8001-444553540000}
Device acquired for use:
Joystick ID = 1 (Registry okay)
1=vJoy Device
1.GUID={DD0A3880-35FE-11E8-8002-444553540000}
Device acquired for use:
Joystick ID = 2 (Registry okay)
2=Saitek Pro Flight Yoke
2.GUID={F4E5FFB0-9053-11E9-8001-444553540000}
-------------------------------------------------------------------
Run: "D:\Fun\Prepar3D\Modules\linda.exe"
LogOptions=40000000 00000001
-------------------------------------------------------------------
SimConnect_Open succeeded: waiting to check version okay
Opened separate AI Traffic client okay
### PDKmodeHelper callback registered
[E] VRI port 1 "com0" failed to open
Running in "Lockheed Martin® Prepar3D® v4", Version: 4.5.12.30293 (SimConnect: 4.5.0.0)
Initialising SimConnect data requests now
FSUIPC Menu entry added
... Using Prepar3D with Professional License
D:\Users\lauen\Documents\Prepar3D v4 Files\EDDH D8 G61.fxml
D:\Fun\Prepar3D\SimObjects\Airplanes\mjc8q400\MJC8Q4.air

 

If I choose the log options "Log LUA events" the is a continious feed of event output in the console. The console form becomes nearly inresponsive due to that.

Does it is normal behaviour?

D:\Fun\Prepar3D\modules\linda/system/hunter.lua:270 fn: hunterGetLVarMonitor
D:\Fun\Prepar3D\modules\linda/system/hunter.lua:271 fn: hunterGetLVarMonitor
D:\Fun\Prepar3D\modules\linda/system/hunter.lua:272 fn: hunterGetLVarMonitor
D:\Fun\Prepar3D\modules\linda/system/hunter.lua:273 fn: hunterGetLVarMonitor
D:\Fun\Prepar3D\modules\linda/system/hunter.lua:285 fn: hunterGetLVarMonitor
D:\Fun\Prepar3D\modules\linda/system/hunter.lua:286 fn: hunterGetLVarMonitor
Global: HUNTER = true
D:\Fun\Prepar3D\modules\linda/system/events.lua:50
D:\Fun\Prepar3D\modules\linda/system/events.lua:96 fn: MainTimer10Hz
D:\Fun\Prepar3D\modules\linda/system/events.lua:97 fn: MainTimer10Hz
D:\Fun\Prepar3D\modules\linda/system/events.lua:98 fn: MainTimer10Hz
D:\Fun\Prepar3D\modules\linda/system/events.lua:99 fn: MainTimer10Hz
D:\Fun\Prepar3D\modules\linda/system/events.lua:100 fn: MainTimer10Hz
D:\Fun\Prepar3D\modules\linda/system/events.lua:104 fn: MainTimer10Hz
D:\Fun\Prepar3D\modules\linda/system/events.lua:54
D:\Fun\Prepar3D\modules\linda/system/events.lua:58
Waiting for an event in "D:\Fun\Prepar3D\Modules\linda/system/init.lua"
Timer event: calling "hidPoll" in "D:\Fun\Prepar3D\Modules\linda/system/init.lua"
D:\Fun\Prepar3D\modules\linda/system/events.lua:26
D:\Fun\Prepar3D\modules\linda/system/events.lua:28
Global: count = 26
D:\Fun\Prepar3D\modules\linda/system/events.lua:30
D:\Fun\Prepar3D\modules\linda/system/events.lua:33
D:\Fun\Prepar3D\modules\linda/system/events.lua:40
D:\Fun\Prepar3D\modules\linda/system/events.lua:45
D:\Fun\Prepar3D\modules\linda/system/events.lua:54
D:\Fun\Prepar3D\modules\linda/system/events.lua:58
Waiting for an event in "D:\Fun\Prepar3D\Modules\linda/system/init.lua"
Timer event: calling "hidPoll" in "D:\Fun\Prepar3D\Modules\linda/system/init.lua"
D:\Fun\Prepar3D\modules\linda/system/events.lua:26
D:\Fun\Prepar3D\modules\linda/system/events.lua:28
Global: count = 27
D:\Fun\Prepar3D\modules\linda/system/events.lua:30
D:\Fun\Prepar3D\modules\linda/system/events.lua:33
D:\Fun\Prepar3D\modules\linda/system/events.lua:40
D:\Fun\Prepar3D\modules\linda/system/events.lua:45
D:\Fun\Prepar3D\modules\linda/system/events.lua:54
D:\Fun\Prepar3D\modules\linda/system/events.lua:58
Waiting for an event in "D:\Fun\Prepar3D\Modules\linda/system/init.lua"
Timer event: calling "hidPoll" in "D:\Fun\Prepar3D\Modules\linda/system/init.lua"
D:\Fun\Prepar3D\modules\linda/system/events.lua:26
D:\Fun\Prepar3D\modules\linda/system/events.lua:28
Global: count = 28
D:\Fun\Prepar3D\modules\linda/system/events.lua:30
D:\Fun\Prepar3D\modules\linda/system/events.lua:33

 

On 6/17/2019 at 1:09 PM, PixelHunter said:

Does it is normal behaviour?

 

Yes, it is a big load of information at this time.

 

In general for your problem: have you enabled "sync to sim"?

It has to be orange if enabled. Otherwise you wouldn't see any actions when you press a button

Yes I think so, there is a orange box around the plane module and when I press a button the corresponding entry appears.

Btw. I tried the FLS A320 and everythink works like expected.

How could I see which command was sent or arrived in P3D?

Edited June 19, 20196 yr by PixelHunter
correction

On 6/16/2019 at 10:23 PM, PixelHunter said:

Hi,

new to LINDA I have a problem with my Saitek Pro Flight switches.

After I deleted all assignments in P3D, I created a default scheme now I would like now to access the Dash8 specific functions.
Controlling the landing lights, beacon, strobe and transponder with a switches from my joystick would be perfect.

Installed is P3D v4, LINDA v3.0.9 and the Majestic Dash 8 Q-400 module v2.6.

As it seems in LINDA everything is well configured: When I press a switch I see it in the joystick config ui with the assigned action and in the console output the button id and a bitmap, but in my simluator cockpit nothing happens.
Only the default FSX commands seems to work.

I reloaded the LUA engine and restarted the sim.

Whats wrong?

Thank you.

Have you been able to solve your problem? If not here are some pointers. I can't help you much as my Flt Sim is in pieces at the moment.

Does your Saitek Panel work with a Default FSX aircraft using the standard Saitek setup? Is the Saitek Panels checkbox ticked on the Setup LINDA page? For the Switch Panel switches to work you need to assign an OnPress action and an OnRelease action. Typically these are for example LIGHT_on for OnPress and LIGHT_off for OnRelease. These would be selected from the specific aircraft module library.

Please do not post logs on the forum. Instead follow the Fault Diagnosis Procedure thread and email the log files and the config_hid.lua for the aircraft.