November 29, 20196 yr Hi, Been setting up flows for the PMDG 747-8. All good except for the following that I've found so far. Not sure if these have been reported previously. "Trim Air On" only turns on the left trim air switch "Trim Air Off" only turns off the left trim air switch "All Packs On" turns them on but "All Packs Off" does nothing. Have to say "All Packs On" again for them to turn off "Emergency Lights Arm" arms them (from the off position) THEN "Emergency Lights Off" turns them on THEN "Emergency Lights on" turns them off "Engine Anti-Ice Auto" doesn't go to auto"Wing Anti-Ice Auto" doesn't go to auto Harry Edited November 29, 20196 yr by HarryS Forgot to add a line Harry S. | System Builder I7-13700K @ 5.3Ghz, MSI Z790 Tomahawk Motherboard, Corsair H100i Platinum AIO Cooler, Gigabyte RTX 4070ti GPU, Corsair Vengeance 32GB DDR5 RAM, Samsung 1TB NVMe + 4 x 1TB SSD's, 27" LG 27GL850-B QHD Monitor, Cooler Master MasterCase H500, Cooler Master 1000 Watt PSU, Win10, MSFS, Logitech X52 Pro
November 29, 20196 yr Commercial Member 52 minutes ago, HarryS said: Hi, Been setting up flows for the PMDG 747-8. All good except for the following that I've found so far. Not sure if these have been reported previously. "Trim Air On" only turns on the left trim air switch "Trim Air Off" only turns off the left trim air switch "All Packs On" turns them on but "All Packs Off" does nothing. Have to say "All Packs On" again for them to turn off "Emergency Lights Arm" arms them (from the off position) THEN "Emergency Lights Off" turns them on THEN "Emergency Lights on" turns them off "Engine Anti-Ice Auto" doesn't go to auto"Wing Anti-Ice Auto" doesn't go to auto Harry Thanks for reporting these Should be dealt with next week. Gerald R https://www.multicrewxp.com
December 3, 20196 yr Commercial Member On 11/29/2019 at 9:50 PM, HarryS said: Hi, Been setting up flows for the PMDG 747-8. All good except for the following that I've found so far. Not sure if these have been reported previously. "Trim Air On" only turns on the left trim air switch "Trim Air Off" only turns off the left trim air switch "All Packs On" turns them on but "All Packs Off" does nothing. Have to say "All Packs On" again for them to turn off "Emergency Lights Arm" arms them (from the off position) THEN "Emergency Lights Off" turns them on THEN "Emergency Lights on" turns them off "Engine Anti-Ice Auto" doesn't go to auto"Wing Anti-Ice Auto" doesn't go to auto Harry Download this patch Unzip and manually replace files as per folder structure. Should be sorted. Are you on P3D V4 or FSX? Gerald R https://www.multicrewxp.com
December 6, 20196 yr Author Thanks Gerald.... That worked. When saying "transponder tara" the selector switch goes past TA/RA to ALT. Also "window heat on" or "window heat off" does nothing. That should be it for this aircraft. Moving on to Qualitywings 787. Harry Harry S. | System Builder I7-13700K @ 5.3Ghz, MSI Z790 Tomahawk Motherboard, Corsair H100i Platinum AIO Cooler, Gigabyte RTX 4070ti GPU, Corsair Vengeance 32GB DDR5 RAM, Samsung 1TB NVMe + 4 x 1TB SSD's, 27" LG 27GL850-B QHD Monitor, Cooler Master MasterCase H500, Cooler Master 1000 Watt PSU, Win10, MSFS, Logitech X52 Pro
December 6, 20196 yr Author Sorry Gerald, didn't answer your question earlier. I'm running P3D 4.5 Harry S. | System Builder I7-13700K @ 5.3Ghz, MSI Z790 Tomahawk Motherboard, Corsair H100i Platinum AIO Cooler, Gigabyte RTX 4070ti GPU, Corsair Vengeance 32GB DDR5 RAM, Samsung 1TB NVMe + 4 x 1TB SSD's, 27" LG 27GL850-B QHD Monitor, Cooler Master MasterCase H500, Cooler Master 1000 Watt PSU, Win10, MSFS, Logitech X52 Pro
February 3, 20206 yr Author PMDG 748-F Flaps: Asking for position 5 from position 10 goes to position 20 then if asked again for position 5 it goes to position 5. Transponder: Asking for tara from standby goes to "Alt RPTG Off" Autobrake: From OFF asking for autobrake 3 goes to autobrake 2 then if asked again for autobrake 3 it goes to autobrake 3. Wing Anti-Ice = Only goes back and forth between OFF and AUTOEngine Anti-Ice = No Problem Starting With Switches Off: hydraulic demand one auto = ok hydraulic demand two auto = no action hydraulic demand three auto = no action hydraulic demand four auto = no action Then: hydraulic demand one on = no action hydraulic demand two on = goes to auto hydraulic demand three on = goes to auto hydraulic demand four on = goes to auto Then: hydraulic demand one auto = goes to off hydraulic demand two auto = goes to off hydraulic demand three auto = goes to off hydraulic demand four auto = goes to off Then: hydraulic demand one off = goes to aux hydraulic demand two off = stays off hydraulic demand three off = stays off hydraulic demand four off = goes to aux Then: hydraulic demand one aux = stays on aux hydraulic demand four aux = stays on aux Then: hydraulic demand one off = no action hydraulic demand four off = no action Harry S. | System Builder I7-13700K @ 5.3Ghz, MSI Z790 Tomahawk Motherboard, Corsair H100i Platinum AIO Cooler, Gigabyte RTX 4070ti GPU, Corsair Vengeance 32GB DDR5 RAM, Samsung 1TB NVMe + 4 x 1TB SSD's, 27" LG 27GL850-B QHD Monitor, Cooler Master MasterCase H500, Cooler Master 1000 Watt PSU, Win10, MSFS, Logitech X52 Pro
February 7, 20206 yr Commercial Member On 2/3/2020 at 8:16 PM, HarryS said: PMDG 748-F Flaps: Asking for position 5 from position 10 goes to position 20 then if asked again for position 5 it goes to position 5. Transponder: Asking for tara from standby goes to "Alt RPTG Off" Autobrake: From OFF asking for autobrake 3 goes to autobrake 2 then if asked again for autobrake 3 it goes to autobrake 3. Wing Anti-Ice = Only goes back and forth between OFF and AUTOEngine Anti-Ice = No Problem Starting With Switches Off: hydraulic demand one auto = ok hydraulic demand two auto = no action hydraulic demand three auto = no action hydraulic demand four auto = no action Then: hydraulic demand one on = no action hydraulic demand two on = goes to auto hydraulic demand three on = goes to auto hydraulic demand four on = goes to auto Then: hydraulic demand one auto = goes to off hydraulic demand two auto = goes to off hydraulic demand three auto = goes to off hydraulic demand four auto = goes to off Then: hydraulic demand one off = goes to aux hydraulic demand two off = stays off hydraulic demand three off = stays off hydraulic demand four off = goes to aux Then: hydraulic demand one aux = stays on aux hydraulic demand four aux = stays on aux Then: hydraulic demand one off = no action hydraulic demand four off = no action Should be all sorted in latest patch In addition to "mce.exe" and "mcpmd744V2.dll", also replace the 2 files in <CandC> folder Thank you once again. Gerald R https://www.multicrewxp.com
February 8, 20206 yr Author On 2/8/2020 at 8:59 AM, FS++ said: Should be all sorted in latest patch In addition to "mce.exe" and "mcpmd744V2.dll", also replace the 2 files in <CandC> folder Thank you once again. wing anti-ice ON from OFF goes to AUTO then asked again for ON goes to ON then ask for AUTO there's NO ACTION then ask for OFF goes to AUTO then ask for OFF goes to OFF asking for transponder TARA from STANDBY still goes to "Alt RPTG Off" then ask again goes to TARA Hydraulics all good. Autobrake good. Harry S. | System Builder I7-13700K @ 5.3Ghz, MSI Z790 Tomahawk Motherboard, Corsair H100i Platinum AIO Cooler, Gigabyte RTX 4070ti GPU, Corsair Vengeance 32GB DDR5 RAM, Samsung 1TB NVMe + 4 x 1TB SSD's, 27" LG 27GL850-B QHD Monitor, Cooler Master MasterCase H500, Cooler Master 1000 Watt PSU, Win10, MSFS, Logitech X52 Pro
Archived
This topic is now archived and is closed to further replies.