January 1, 20206 yr Happy New Year to you both. Working on flows for the iFly 744. A couple things noticed. 1. Flaps 5,10, etc. no action. However FO reports having set them. After setting them manually to say 10 and then saying "Flaps 5" no action but saying "Flaps Up" works ok. 2. "All Fuel Pumps On" All switches turn on except OVRD FWD RIGHT and OVRD AFT RIGHT 3. Transponder TARA or TA RA only goes to TA 4. When all four hydraulic demand switches are set to auto saying "hydraulic demand one off", "hydraulic demand two off", "hydraulic demand three off" work but "hydraulic demand four off" no action 5. When beacon light is off saying "beacon light on" no action and FO reports that it's already on. That's it for now. Harry Harry S. | System Builder I7-13700K @ 5.3Ghz, MSI Z790 Tomahawk Motherboard, Corsair H100i Platinum AIO Cooler, Gigabyte RTX 4070ti GPU, Corsair Vengeance 32GB DDR5 RAM, Samsung 1TB NVMe + 4 x 1TB SSD's, 27" LG 27GL850-B QHD Monitor, Cooler Master MasterCase H500, Cooler Master 1000 Watt PSU, Win10, MSFS, Logitech X52 Pro
January 2, 20206 yr Commercial Member 3 hours ago, HarryS said: Happy New Year to you both. Working on flows for the iFly 744. A couple things noticed. 1. Flaps 5,10, etc. no action. However FO reports having set them. After setting them manually to say 10 and then saying "Flaps 5" no action but saying "Flaps Up" works ok. 2. "All Fuel Pumps On" All switches turn on except OVRD FWD RIGHT and OVRD AFT RIGHT 3. Transponder TARA or TA RA only goes to TA 4. When all four hydraulic demand switches are set to auto saying "hydraulic demand one off", "hydraulic demand two off", "hydraulic demand three off" work but "hydraulic demand four off" no action 5. When beacon light is off saying "beacon light on" no action and FO reports that it's already on. That's it for now. Harry Happy new year. Flaps probably broken as a result of wholesale changes made to flaps handling system which applies to all aircraft. This was done very recently, and iFly 744 v2 wasn't tested.Will be mended. Thanks. Other issues will be looked at. Gerald R https://www.multicrewxp.com
January 3, 20206 yr Commercial Member On 1/1/2020 at 9:38 PM, HarryS said: 1. Flaps 5,10, etc. no action. However FO reports having set them. After setting them manually to say 10 and then saying "Flaps 5" no action but saying "Flaps Up" works ok. 2. "All Fuel Pumps On" All switches turn on except OVRD FWD RIGHT and OVRD AFT RIGHT 3. Transponder TARA or TA RA only goes to TA 4. When all four hydraulic demand switches are set to auto saying "hydraulic demand one off", "hydraulic demand two off", "hydraulic demand three off" work but "hydraulic demand four off" no action 5. When beacon light is off saying "beacon light on" no action and FO reports that it's already on. Sorted in latest V2.8.2.4 Either update to latest MCE version or manually patch previous version using files contained in this zip file Gerald R https://www.multicrewxp.com
January 3, 20206 yr Author Thanks for that. I've pretty much finished testing and setting up flows for the planes that I use for now. Meanwhile if I can help with any specific testing you might need please don't hesitate to ask. The planes I have installed in P3D 4.5 are: PMDG 737NGX/NGXu PMDG 747/8i PMDG 777LR/ER Aerosoft A318/19/20/21 Professional iFly 747 V2 QualityWings 787 QualityWings RJ100 TFDi 717 (currently grounded due to view switching bug but can test on the ground) All default planes are deactivated. Thanks again for all your help and support. Harry Harry S. | System Builder I7-13700K @ 5.3Ghz, MSI Z790 Tomahawk Motherboard, Corsair H100i Platinum AIO Cooler, Gigabyte RTX 4070ti GPU, Corsair Vengeance 32GB DDR5 RAM, Samsung 1TB NVMe + 4 x 1TB SSD's, 27" LG 27GL850-B QHD Monitor, Cooler Master MasterCase H500, Cooler Master 1000 Watt PSU, Win10, MSFS, Logitech X52 Pro
January 3, 20206 yr Commercial Member 3 hours ago, HarryS said: Thanks for that. I've pretty much finished testing and setting up flows for the planes that I use for now. Meanwhile if I can help with any specific testing you might need please don't hesitate to ask. The planes I have installed in P3D 4.5 are: PMDG 737NGX/NGXu PMDG 747/8i PMDG 777LR/ER Aerosoft A318/19/20/21 Professional iFly 747 V2 QualityWings 787 QualityWings RJ100 TFDi 717 (currently grounded due to view switching bug but can test on the ground) All default planes are deactivated. Thanks again for all your help and support. Harry You're welcome. Will take the offer. Thank you Gerald R https://www.multicrewxp.com
February 18, 20206 yr Author Hi Fella's, iFly 744 V2 - P3DV4.5 During flight (descent) asked for "autobrake 3". The selector danced around to various settings then finished on "Disarmed". FO confirmed 3 was set. Repeated several times with the same result. Haven't checked on 748. Harry S. | System Builder I7-13700K @ 5.3Ghz, MSI Z790 Tomahawk Motherboard, Corsair H100i Platinum AIO Cooler, Gigabyte RTX 4070ti GPU, Corsair Vengeance 32GB DDR5 RAM, Samsung 1TB NVMe + 4 x 1TB SSD's, 27" LG 27GL850-B QHD Monitor, Cooler Master MasterCase H500, Cooler Master 1000 Watt PSU, Win10, MSFS, Logitech X52 Pro
February 20, 20206 yr Commercial Member On 2/18/2020 at 8:48 PM, HarryS said: Hi Fella's, iFly 744 V2 - P3DV4.5 During flight (descent) asked for "autobrake 3". The selector danced around to various settings then finished on "Disarmed". FO confirmed 3 was set. Repeated several times with the same result. Haven't checked on 748. should be sorted in latest patch. Only tested with -400 series. Issue was in "mce.exe". I suggest you replace all files though. There are other fixes for NGX support, among other things Gerald R https://www.multicrewxp.com
Archived
This topic is now archived and is closed to further replies.