GNS 530W causing xplane 11 to freeze after self test

[mrwhitney 0]

I just purchased and installed the GNS 530w .  I enabled the plug-in and followed instructions to add it to the cessna 172.  When I press enter at the self check screen, Xplane freezes.  I have tried rebooting and restarting X-plane and it happens every time. Any thoughts on troubleshooting?

Edited April 18, 2020 by mrwhitney

[RXP 2,338]

Hi,

Is this happening when pressing any ENT key during boot, or only after the POST TEST screen (the one which helps validating the HSI needles are displaying correct deiavtions)?

Can you please post the content of the RXP log files? (see User's Manual for file/path)

[mrwhitney 0]

After the post test screen.  Attached are the logs.

GNS2 log:

20/04/18 18:35:03.033 09220 -    ] # win.xpl version 2.4.19.0
20/04/18 18:35:03.033 09220 INFO ] 

GNSSim Log:

20/04/18 18:35:05.655 09220 -    ] # rxpGnsSim64.dll version 2.4.19.0
20/04/18 18:35:05.654 09220 INFO ] 
20/04/18 18:35:40.202 09220 INFO ] using: C:\Users\mr_wh\Desktop\X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\checklist.txt
20/04/18 18:35:40.229 09220 INFO ] G530.1 - TRAINER 3300
20/04/18 18:36:34.097 09220 INFO ] FPL not found in: C:\ProgramData\Garmin\GNS Trainer Data\GNS\

[mrwhitney 0]

I set LogTrainer = 5 and attempted it again.  Here is an enhanced GNSSim Log:

20/04/18 19:42:53.782 10032 -    ] # rxpGnsSim64.dll version 2.4.19.0
20/04/18 19:42:53.781 10032 INFO ] 
20/04/18 19:43:11.862 10032 INFO ] using: C:\Users\mr_wh\Desktop\X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\checklist.txt
20/04/18 19:43:11.899 10032 INFO ] G530.1 - TRAINER 3300
20/04/18 19:43:11.924 10032 INFO ] C:\Program Files (x86)\Garmin\GNS Trainer\GNS
20/04/18 19:43:11.950 10032 INFO ] C:\ProgramData\Garmin\GNS Trainer Data\GNS
20/04/18 19:43:11.974 10032 INFO ] C:\Program Files (x86)\Garmin\GNS Trainer\GNS\db
20/04/18 19:43:12.008 10032 INFO ] C:\Users\mr_wh\Desktop\X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\checklist.txt
20/04/18 19:43:44.683 10032 WARN ] RPRT 0ea0165d -44 001f .\hwm_voice.c(704): Region read error on audio header data
20/04/18 19:44:01.697 10032 INFO ] using: C:\Users\mr_wh\Desktop\X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\checklist.txt
20/04/18 19:44:01.723 10032 INFO ] G530.1 - TRAINER 3300
20/04/18 19:44:01.737 10032 INFO ] C:\Program Files (x86)\Garmin\GNS Trainer\GNS
20/04/18 19:44:01.762 10032 INFO ] C:\ProgramData\Garmin\GNS Trainer Data\GNS
20/04/18 19:44:01.787 10032 INFO ] C:\Program Files (x86)\Garmin\GNS Trainer\GNS\db
20/04/18 19:44:01.812 10032 INFO ] C:\Users\mr_wh\Desktop\X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\checklist.txt
20/04/18 19:44:02.804 10032 WARN ] RPRT 0ea0165d -44 001f .\hwm_voice.c(704): Region read error on audio header data
20/04/18 19:44:26.702 10032 INFO ] FPL not found in: C:\ProgramData\Garmin\GNS Trainer Data\GNS\

[RXP 2,338]

Can you try renaming the checklist.txt file to something else and see whether this file is causing the crash?

[mrwhitney 0]

Yes. That was it.  Thank you.

[RXP 2,338]

Can you send me the file, I'd like to see whether there is a problem in our code or in the file?

You can simply paste the content of the file in this discussion.