November 26, 20214 yr Hi guys Sorry if this topic has already been covered before, I have not found anything about it, My question is, how far away is ATC from the rest of the IA aircrafts? This distance can be modified somewhere? ... for example in the users? I am currently testing AIG offline, with only a density of 15, which in my opinion is not a high density, and the ATC is driving me crazy, it talks every second, or a couple of seconds ... Thanks for the help. i7 11800, RTX 3070, 32Gb RAM, 2Tb
November 26, 20214 yr 2 hours ago, Milosensas said: Hi guys Sorry if this topic has already been covered before, I have not found anything about it, My question is, how far away is ATC from the rest of the IA aircrafts? This distance can be modified somewhere? ... for example in the users? I am currently testing AIG offline, with only a density of 15, which in my opinion is not a high density, and the ATC is driving me crazy, it talks every second, or a couple of seconds ... Thanks for the help. are you setting your density in MSFS2020 or in the AIG-TC? As far as I am aware, if you have AIG-tc set to 99% and MSFS set to 15% then ALL of the traffic is injected but only the MSFS figure is actually displayed as aircraft.. I know that it was overwhelming my ATC before I stamped on the ATC to stop all the unneeded chatter with the mod from flightsim.to... so try setting your AIG-tc injection way down and leaving MSFS at around 50% and see if that improves things for you. Graham Edited November 26, 20214 yr by Moria15 System specs... CPU AMD5950, GPU AMD6900XT, ROG crosshair VIII Hero motherboard, Corsair 64 gig LPX 3600 mem, Air cooling on GPU, Kraken x pump cooling on CPU. Samsung G7 curved 27" monitor at 2k resolution ULTRA default settings.
November 28, 20214 yr Author On 11/26/2021 at 1:49 PM, Moria15 said: setting your AIG-tc injection way down and leaving MSFS at around 50% and see if that improves things for you. Thanks for the advice, I have made the recommendations that you indicate and indeed the unnecessary talks are considerably reduced but even so, the ATC locates the aircrafts from far away, I do not know if 80 or 90 nm?? In P2A you have the option to reduce or increase this distance, how great would it be to have this slider configurable by the user, don't you think? 🙂 i7 11800, RTX 3070, 32Gb RAM, 2Tb
November 28, 20214 yr I think default ATC uses more or less realistic ATC coverage areas/frequencies so the area a particular ATC controller is operating in would vary greatly. In more congested airspace the ATC sectors will generally be smaller but busier, in less congested airspace the sectors will be larger so certainly possible to hear communications with aircraft that are fairly distant. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
Archived
This topic is now archived and is closed to further replies.