I build a flight plan in the TDS 750xi with about 5 waypoints, each with a altitude constraint, and an ILS approach procedure.  I store the plan and then fly the plan.  It all works perfectly!

I restart the flight, load the plan from the TDS Catalog into the TDS 750xi and the waypoint/fix plan is there but every altitude, including those specified by the approach procedure are set to 4300'.  That is not going to work because the departure airport is at 3,000' and there is a 6,000' ridge between the departure and destination.  

I started over and rebuild the plan and stored it under a .2 name in the TDS catalog - same result!  When I reload the .2 plan I see the same 4,300' for every waypoint including the procedure fixes.

2nd Problem

I load, from the TDS catalog, a stored plan that has worked well with many prior flights.  it loads up as I expect but the Active VOR freq is set to a VOR about 250-miles away and the standby VOR freq is set to another VOR close to the Active one.  I change the freqs to the correct one for the VOR and ILS I am using at the destination.  Those freqs appear as they should for about 4-seconds then switch back to the far distant pair of VORs.

I use the nearest VOR window in the 750xi and click on the VOR for the destination airport .  It loads into the Active freq and then quickly changes back to the far distant VOR. 

None of these problems were happening with these stored flight plans this, prior to the update.

Any suggestions?

 

Hello,

We are sorry to hear that you are having problems with the TDS GTNXi, we are here to assist our customers. The problems that you have posted have nothing to do with SU9, it is a coincidence with SU9 being released.

We have seen your post on our Discord channel about these issues and we will gladly look them over, however, we need specific information on your problems, so we can replicate them, as this is the only bug report on the problems, so if nobody else experiences these issues, it seems like this is an isolated case.

Let's continue communication on Discord, where we have asked you for details and please be assured that we will do our best in solving any issues. Thank you.