Anyone else experiencing this?

 

I'm flying the FBW A320 Dev Version (latest update) on VATSIM and ocassionally I've got the issue, that the aircraft (or VATSIMs vPilot??) is changing the VHF1 frequency on it's own.

Currently departing EGPH for ENBR: I've set TWR freq. 118.700 on VHF 1 active and 135.535 (SCO_CTR) on VHF1 standby but when at holding point RWY24 in departure sequence, the aircraft changes to VHF1 to a random frequency like 128.225 or something.

Doesn't matter if i set VHF1 via the EFB or the radio panel and appears to occur just once per flight maximum (also during approach or en route).

Having this with the FBW A320 ever since I've started using this otherwise great addon about half a year ago.

 

What am I doing wrong here?🙁

Any hints?

I’ve had this yes. Make sure to clear all radio freq related key bindings including the ATC window ones. Because even if the window is not open, they will still be active. I think the default bindings for this are 1-9. 
 

Never had a problem since I did this

Thanks @mrlip, I'll give it a try!

 

You might have auto ATC on. Once in a while your assistance settings will reset. I had trouble with VHF1 and trimming the rudder until I saw that the assistance was on. Turned it off and everything was fine.

On 9/13/2022 at 12:51 AM, SizzlingPopcorn said:

You might have auto ATC on. Once in a while your assistance settings will reset. I had trouble with VHF1 and trimming the rudder until I saw that the assistance was on. Turned it off and everything was fine.

 

Auto ATC was off but this

 

On 9/12/2022 at 11:54 PM, mrlip said:

I’ve had this yes. Make sure to clear all radio freq related key bindings including the ATC window ones. Because even if the window is not open, they will still be active. I think the default bindings for this are 1-9. 
 

Never had a problem since I did this

was the issue!

I've cleared every key binding for the radios and it's all good now!
Thanks a lot @mrlip