October 22, 20223 yr Had to replace HD and reinstall everything. Have FSUIPC ver. 6.1.9. installed in the addon section of P3D and in the P3D modules section. No change. I can load a plan but in looking into the Controller info, at one airport no boxes for frequency are checked. I can check them off and frequencies appear. Reinstall RC did the make runways thing.with LORBY in the same P3d main directory. After I start RC, the little window appears in P3D. I hit 2 or 3 on the keyboard for say weather from FSS and the following error appears: Runtime error 75 RadarContact.fsuipc.rcv4code. Set the FLT/WX path to documents/prepar3D v4 files. Do I need to run the Rebuild scenery DB button in RC? Thanks Jim CYWG Edited October 23, 20223 yr by jagabom
October 23, 20223 yr You need to manually copy the f4.csv file that MakeRwys created in the root P3D folder over to your RC4 data folder. Makerwys creates the file, but that file is not automatically copied over as part of the database update process. Regarding the Error 75, see this thread: Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
October 23, 20223 yr Author Hey Bob, thanks man. Going to a party tonight and hangover tomorrow. Will try your information tomorrow. Thanks Jim CYWG
October 23, 20223 yr Author Hey Bob. Sorry it did not work. There was already an F4 file in RC so I replaced it with the new one. After I hit say 2 for RC for the weather, the radio changes to the proper frequency then the error happens. Strange. May try to reinstall unless you have another idea. On a reinstall of RC I got this message Installer for FSUIPC4.DLL version 4.152 Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" ... NOT found! Asking user to find FSX.EXE instead ... Looking in the registry I don't see this entry. Could I add this in to the registry? Maybe that is the reason for the error. RC is looking for a version number of FSX. Tried renaming FS9 to FSX but it wouldn't take it. Thanks JIm CYWG Edited October 23, 20223 yr by jagabom
October 23, 20223 yr That's the installer for FSUIPC v4, which doesn't work with P3Dv4 anyway. You can disregard that installer error, assuming that you have separately installed either FSUIPC v5 or v6. Are you using the RC4 installer from the download here on AVSIM? I don't remember it trying to install FSUIPC 4 on me...but then it's been a long time. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
October 24, 20223 yr Author Installed from an old copy of RC that I had. Will try the one at the link provided in the RC forum by John Decker. https://www.icloud.com/iclouddrive/0pEpnc7H0Y7gmku1afLwZeElg#rcv43-07-08-01 Even reinstalled FSX. Whole install of RC went fine but still got the same error 75 after trying to get weather. Tried also installing simconnect. May never work again but we will see. Thanks JIm
October 24, 20223 yr Author Bob, I think I got it. For some reason I decided to open the RCV4 short cut I made for the desk top. Went to the Compatibility section and decided to change the Compatibility mode. Clicked the Run this program etc, etc button and set it for Windows 7. The problem was that the RC executable in the RC folder is in Win 7 compatibility mode but the short cut was not. I think it is working now. We will see. Thanks. Jim CYWG Edited October 24, 20223 yr by jagabom
Archived
This topic is now archived and is closed to further replies.