Bonjour à tous, 

Je découvre depuis quelques jours le logiciel "Pilot2atc", préparation de plan de vol assez simple en utilisant l’aide Navigraph. Par contre lors de la connexion à MSFS, mon avion n’apparait pas sur le tracé du plan de vol. dans la barre du haut , j’ai bien la vitesse, l’altitude, le mode et enfin le transpondeur. j’ai respecté le manuel d’installation , pour l’instant je n’utilise pas l’ATC , j’attends de bien maitriser le plan de vol. L'onglet en bas de l'écran avec le petit avion jaune n'a pas d'action pour faire apparaitre ou pas la silhouette de l'avion sur la carte. Dans la bas de l’application j’ai bien “simulator connected”.FSUIPC7 est actif,  Si vous avez une indication à me donner , merci de votre aide. Cordialement. jack

 

When Pilot2ATC connects, there will be 3 lines in the Speech Text Window at the bottom right and the Connect button will turn green and the text will change to Connected.  The last line in the Speech Text Window will be "Grammars Loaded".
“Simulator Disconnected” will appear on the second press of the Connect button as it disconnects from the SIM.
Also, the Yellow aircraft representing your aircraft will be visible on the map.

If not, you are not completely connected.  Check the following:

•     Be sure the SIM is fully up and running and not paused before you try to connect.  The cockpit must be showing.
•     Be sure you are connected to the internet. It must be a reliable connection.
•     English-US Language installed and set as Primary Language, English Speech Recognition installed also..    Working Microphone installed and set as Default Sound Input device in Windows
•     Valid Call Sign – Try using the default call sign of Mfg: Beech; Tail Number: N431VB.  Press the Save button.
•     Try running the program in Administrator mode by right clicking on the Pilot2ATC.exe file and selecting “Run as Administrator”
•     If connected but the radios aren’t working, check the Battery and Avionics switches on or the “Ignore battery” and “Ignore Avionics” options are checked in P2A Config

Dave

Thank Dave for your response.

In my case it was my headphone which was not recognized by Window, I had to download the driver, and since P2A works, I have the green button and the line Grammars Loaded !

regards

jack