I watched a YouTube video which showed how the Thrustmaster Airbus Capt Pack was pre-configured for the FBW A320 in MSFS Control settings and it all worked correctly. However I have just installed the FBW A320 and although the control settings show that my Captains Pack is all set up correctly the Engine No 2 does not work in the FBW cockpit. When I put Engine No1 start switch to ON the switch in the FBW cockpit also goes to the On position, but with Engine No2 when the switch is put to the ON position nothing happens in the FBW cockpit.
In the MSFS 2020 Control settings the switches are both set to the same parameters, one for Eng 1 and one for Eng 2 and both show they are operating correctly.
I have deleted the Eng 2 settings and reinserted them but this has not solved the issue. Is there something in the FBW settings or a CFG file that I can check.

Any help would be appreciated.

58 minutes ago, wardp said:

something in the FBW settings

not using the TMA myself but did you check FBWs documentation at https://docs.flybywiresim.com/fbw-a32nx/settings/#controllers

EFB settings are here https://docs.flybywiresim.com/fbw-a32nx/feature-guides/flypados3/settings/

Throttle calibration here https://docs.flybywiresim.com/fbw-a32nx/feature-guides/flypados3/throttle-calibration/

Also, did you check another USB port to rule out a connection issue

This might be relevant: Reported Issue: Can't Start Engines When Using TCA Throttle

Thanks for the replies. There is some good information in the links above and the linkin the 2nd post was just what I was looking for as it has fixed my problem.

Many thanks

Phil