Cannot add imported airport to flight plan

[beer_war 0]

I ran MakeRwys for all airports longer than 500ft, then import taxiways and gates into 2.7.0.0 Beta1A Update. I then want to plan a flight from LFPS, a tiny grass strip in the French Alps.

I can see the airport in the TaxiMnt window:

However, when I try to add LFPS to the flight plan, it is apparently not recognized:

 

[beer_war 0]

Log file after I restart Pilot2ATC and try to add LFPS:

Program StartedPilot2ATC® (P2A) - version 2.7.0.0_x64_Beta1A  06/17/2023 17:02:54
Windows OS: Microsoft Windows 11 Pro
Version: 6.2.9200.0
Platform: Win32NT
Memory: 34290032640

Trying to create DB_Dyno.
DB_Dyno created successfully.
Init 15% done.
Trying to create DB_Base.
DB_Base created successfully.
Application frmP2AMain starting 06/17/2023 17:03:10
Loading Joystick Devices - 2 devices loaded.
Loading Form
Main form opened: Pilot2ATC® 2021 v. 2.7.0.0_x64_Beta1A      Navigraph - AIRAC cycle: 2306
Loading Joystick Devices - 2 devices loaded.
Loading Joystick Devices - 2 devices loaded.
Loading Joystick Devices - 2 devices loaded.
Loading Joystick Devices - 2 devices loaded.
Joystick Device number 0 successfully activated.
Loading Map Control
LoadMapControl: panel 1
Creating ucMap1
SQLiteVersion: 3.8.11.1 | 2015-07-29 20:00:57 cf538e2783e468bbc25e7cb2a9ee64d3e0e80b2f | INTEROP_CODEC INTEROP_EXTENSION_FUNCTIONS INTEROP_VIRTUAL_TABLE NET_40 PRELOAD_NATIVE_LIBRARY THROW_ON_DISPOSED TRACE TRACE_PRELOAD TRACE_SHARED TRACE_WARNING USE_PREPARE_V2 WINDOWS
ucMap1 Created
ucMap DockFill set.
Setting Map Mode
Done Loading Map Control
Loading FPL Control
FPL Control Loaded
Retrieving weather from web successful at 06/17/2023 17:03:13
Retrieving TAF from web successful at 06/17/2023 17:03:14
Retrieving weather from web successful at 06/17/2023 17:08:16
Retrieving TAF from web successful at 06/17/2023 17:08:16
Retrieving weather from web successful at 06/17/2023 17:10:00
 GPS FlightPlan Changed - 06/17/2023 17:10:17
Retrieving weather from web successful at 06/17/2023 17:10:18

Edited June 17, 2023 by beer_war

[Dave-Pilot2ATC 871]

After running TaxiMnt, you must restart P2A so the changes can be loaded into the running data.

Dave

[beer_war 0]

Yes, I know. It's still not working

[Dave-Pilot2ATC 871]

Check the Runways tab in TaxiMnt and be sure the runways are marked for Landing and Takeoff.

If that doesn't work, send the r5.csv, t5.csv and runways.xml files to me at admin@p2atc.com and I'll check to see what's going on.

Dave

Edited June 17, 2023 by Dave-Pilot2ATC

[beer_war 0]

The runways are marked for landing and takeoff. I sent you a mail as requested.

[beer_war 0]

Dave helped me to get it working after a lot of back and forth and a lenghty email exchange. Turns out you need to uncheck this checkbox in Config -> FltPlan so it loads in those dirt strips.