Centers in the AIRAC database don't include boundaries, so they are not taken from there.

You can update these frequencies to the ones in your AIRAC data or edit the frequencies of individual Centers in the DataMnt tool, found on the Utilities tab of Settings.

Select the ARTCC Ctlrs tab on the Taxi-Gates-Rwys-Ctlrs panel, then zoom into the area you are interested in.

Press the Display on Map button and the map will display the centers and their boundaries on the map.

Press the Update button above the list and P2A will attempt to get the latest frequencies for each Center from the AIRAC Data.

If you need to edit any individual frequencies:

• Select the one you want to edit and it will be highlighted in the list of ARTCC Controllers on the left.
• Change the frequency to what you want and then press the Save Ctlr button.

Dave

Hi Dave, I got as far as i  zoom into the area. 

I press the Button Display on Map button but nothing happens. The map will not display the centers and their boundaries on the map.

What do I wrong?

Thank you for your help.

Bruno

The boundaries are not displayed on the main map.  They are displayed on the smaller map that is part of the DataMnt tool.  You can resize the DataMnt window if you want the map to be larger.

Then zoom out on the DataMnt map and press the Display on Map button again.

Dave

Dave, I'm in the DataMnt map, but nothing happens at any size of the map when I push the button Display on Map. 

I believe I do have a problem with my setup.

The log file shows the following:

2024-10-11 18:37:44.7334|INFO|Pilot2ATC_3.ViewModel.MainWindowVM|Program StartedPilot 2 ATC (P2A) - version 3.0.0.0_EarlyAccess 0.0.16  11.10.2024 18:37:44
2024-10-11 18:37:45.9710|INFO|Pilot2ATC_3.ViewModel.MainWindowVM|Pilot2ATC® starting initialization.
2024-10-11 18:37:45.9710|INFO|Pilot2ATC_3.ViewModel.MainWindowVM|NumberDecimalSeparator: 
2024-10-11 18:37:46.3784|INFO|P2ADataLinq.WxMgr|Retrieving weather from web successful at 11.10.2024 18:37:46
2024-10-11 18:37:46.4232|ERROR|P2ADataLinq.WxMgr|Retrieving TAF from web failed at 11.10.2024 18:37:46
2024-10-11 18:38:52.6040|INFO|Pilot2ATC_3.Panels.Settings.SettingsPanel|SettingsPanel Initializing.
2024-10-11 18:38:52.6040|INFO|Pilot2ATC_3.Panels.Settings.SettingsPanel|SettingsPanel Initialized.
2024-10-11 18:38:52.6459|INFO|Pilot2ATC_3.Panels.Settings.SettingsPanel|Settings Panel LoadPTTJoystickSettings.  PTT Joystick Name: 
 

Not sure if this has to do with my problem.

The Loading time has not changed, it's still more then 3 minutes.

Thanks, Bruno

Dave, I installed version P2ATCv3_Full_Setup_EarlyAccess_0.0.16 with Navigraph 1801 totally new. Now the DataMnt map and press the Display on Map button works. It shows me the areas as expected. 

I'm going to do the data conversion to see what happens after that.

Tomorrow I'm not at home, so it has to wait for sunday.

Let you know then.

Bruno

Good News - with P2ATCv3 Update_EarlyAccess_0.0.20 and before installed Pilot2ATCv3_Full_Setup_EarlyAccess_0.0.19 with Navigraph Data - as far as I tested it's ok now.

Update Navagraph version: - I updated with Navigraph FMS Data Manager to the newest Navigraph version 2410. Be sure to set within Navigraph FMS Data Manager the right datapath before.

- in Pilot2ATC V3 in Settings- Utilities - Data Mnt - ARTCC Ctlrs - Choose the Area in the Map - Display on Map - Update

 

Above Post went out before I had finished writing.

Convert the Navigraph Data using the Data Conversion tab in the DataMgr, so the Data can be used by Pilot2ATC V3.

Starting Pilot2ATC V3 is now also again fast - it takes appr. 25 to 30 seconds.

Thanks