V 29 does not work at all with Zibo 738

[PerWel]

Both COM at top left says only COM, right one is active and ATIS is heard. But when clickin top to switch to Clearance it is swithed to top but nothing in Co Pilot request panel.
Nothing to select.

 

Funny thing is also that if I click top to switch both COM boxes switches. Tried to set freq myself via popup panels and manual does not work.

I tried to use the new settings Bypass ACFT and Reverse COM no change at all, disconnect and connect between changes.

Zibo 738 is the one I fly most of the time so it just must work.

 

Tried 27N again and it worked nice as it should. Have to revert back to that one.

[Normalchecklist]

I had the same experience, but it fixed itself after rebooting the PC. Initially restarting XP12 and P2A did not help.

Edited January 8 by joelpacheco

[PerWel]

Dave How do we do this:

can be made to work using various combinations of the Channel Mic buttons and Volume/Monitor buttons.)

 

FYI

I tried 29 with Toliss A321 and after connect it started like in Zibos and same problems. But after clicking the Green light up Mon but it turned Grey and everything worked.

Clicking Mon button in Zibo nothing happen, still Green=Active

 

[PerWel]

Tried 29 with FF 767 and it worked.

then just for testing I tested with Laminar default 738 and it worked direct like 767

 

I must ask on Zibo forum what he have done with radios on the 738.

Zibo used Laminar 738 as a starter then modded it a lot to make it like the real one.

Edited January 8 by PerWel

[PerWel]

36 minutes ago, joelpacheco said:

I had the same experience, but it fixed itself after rebooting the PC. Initially restarting XP12 and P2A did not help.

Strange but I will test it. Are you on Win10 or 11?

[PerWel]

1 hour ago, Normalchecklist said:

I had the same experience, but it fixed itself after rebooting the PC. Initially restarting XP12 and P2A did not help.

Reboot did nothing, no change same problem. I also disabled all plugins except XUIPC

No change

[PerWel]

Back on 27N and it works as it should only thing is that COM 2 on left COM 1 right but comm is working

Edited January 8 by PerWel

[PerWel]

I asked in Zibo forum about what he have changed with com radios. Waiting to see any answer

[Normalchecklist]

The issue is that Zibo loads with both Coms ON. Seems this is confusing P2A.

If you turn Com2 OFF from your aircraft radio panel, then P2A interface populates the Coms.

[PerWel]

25 minutes ago, Normalchecklist said:

The issue is that Zibo loads with both Coms ON. Seems this is confusing P2A.

If you turn Com2 OFF from your aircraft radio panel, then P2A interface populates the Coms.

Interesting. Will check this

Thanks for hint

[PerWel]

37 minutes ago, Normalchecklist said:

The issue is that Zibo loads with both Coms ON. Seems this is confusing P2A.

If you turn Com2 OFF from your aircraft radio panel, then P2A interface populates the Coms.

Yes it did work. Saw that both com 1 and 2 was ON on left radio

Turned OFF no 2 and P2A connected nice

 

Sometimes problems are right in front of you and simple to fix, but you does not see it 😄

Edited January 9 by PerWel

[PerWel]

Com 1 and 2 was ON on both radios.

So I turned off 2 on left radio and 1 on right radio and.....

And in P2A Com 1 on left and Com 2 right as it should be

 

IT   WORKS Now. 😄😎

Edited January 9 by PerWel

[PerWel]

Forgot to say zibo works now in 29 version

It was a zibo problem not P2A 👍

[Wim Dreves]

Hi look at discord please for solution https://discord.com/channels/989167853754273872/989173081253769287/1326501464444764181

[PerWel]

32 minutes ago, Wim Dreves said:

Hi look at discord please for solution https://discord.com/channels/989167853754273872/989173081253769287/1326501464444764181

I have discord but this link ends up with a msg no  text channel

Is it on zibos