Hi JD,I am flying a flight from a flightplan created in Fs9, EGNM-EBBR, I have Otto flying the plane and all is well till I start the Vectors to RW2 and 18nm from the Airport/Runway RC3 stops operating no Miles registering and no response from the ADV Display, any help please.Ken

only with this one flight plan, or with all flight plans?jd

Hi JDI had similar problem today where after clearing me to 15,000 feet the Departure controller did not issue any further climb instructions nor pass me on to the enroute controller.I levelled out at 15,000 feet (I've heard enough of Bill Stevens to last me a lifetime already :7 )waiting for further instructions when suddenly the controller told me I had busted my altitude and a range of repetitive commands frequently headed by "Listen up now" that kept repeating despite my reponses.In the end I was forced to cancel my IFR but swooped back over the departure strafing the tower before pressing the button ;-)I was using the LDS 767 - don't know if that makes a difference.RegardsAndy b

what was the distance from departure to arrival? was there a checkpoint near the arrival airport?jd

See attached txt file for flightplan.Nearest waypoint to departure = 39.8 nmNearest waypoint to arrival = 37.8 nmAndy b