-
Content Count
106 -
Donations
$0.00 -
Joined
-
Last visited
Posts posted by Jockos
-
-
What is the best course of action to update an existing ver of AAO to the latest, without losing any generated files,
Cheers
Jock
-
Oliver
Thank you for your detailed response.
You prompted me to look at event viewer and I was getting these spurious NVIDIA errors.
I updated my Vid driver and now P3D has loaded.!!
I moved around through a number of airports that I had loaded via Lorby.
All looks fine. I believe things are in order.
My sincerest apologies for tasking you with my query, unnecessarily.
Thank you for Lorby Addon Manager it is a great application.
Cheers
Jock
-
The usual P3D splash screen appears, 'Building Database for new scenery' appears and the sliding panel finishes. After a few seconds the splash screen disappears.
No error message.
Cheers
Jock
-
I have had an unfortunate event attempting to install scenery that I deduce has ‘scrambled’ my scenery set-up in P3D v5. P3D will not now load.
I am a new user of Lorby Addon and still learning, so to speak.
I could see that at least 8 of my sceneries were missing, all previously installed via the ‘add to scenery cfg’ method, not using Lorby.
I have gone about reinstalling these sceneries using Lorby, synched the simulator in ORBX and ensured that the order is correct at the Lorby ‘Scenery’ tab.
I still can’t get a load with P3D.
I suspect much is array with cfg files, Indexes etc., and I am unsure how to go about fixing.
I could uninstall/reinstall P3D but I think I would still have an issue with the scenery configuration.
I am attempting to avoid a clean install of P3D and a reinstall of my relatively large collection of addon sceneries.
Can you give me some guidance on how I might go about fixing, if this is possible with Lorby Addon, please?
Any assistance will be appreciated.
Cheers
Jock McIntyre
-
Mark
Thank you for your speedy response.
Reloaded simconnect from the MSI and all looking good.
I should take more notice of error messages!!!!
Cheers
Jock
-
Folks
I am getting a Simconnect error on start up of P3Dv5.
I cannot connect aviaServer to my licensed applications (PMDG, FSL etc) via my Android tablet.
Is this the reason why?
All my other add-ons appear to be working ok. (Active Sky, LNM EZCA etc)
I just want to ascertain if this is so before spending anymore time trying to get this to work, as AviaServer has worked faultlessly for me in the past.
Any input would be appreciated.
Cheers
Jock
-
I have had the need to reinstall MSFS2020.
I thought that under the previous install the above folder appeared within in the Community Folder. Not so now.
It is present under the Lorbysi AAO installation. Should it be copied over to the Community Folder, or should AAO ver 2.26 be reinstalled?
All my previous settings for the PMDG DC-6 have been retained.
Any assistance would be appreciated.
Cheers
Jock
-
Mark
After our lodging reports to QW Tech Support of the issue, Lars has responded with:-
Please try the following:
Navigate to\Prepar3D v5\QualityWings\Redistributables\and run the following file:Crash_Reporting_v1.4.0_P3Dv5.exe(it will be a hidden installation and not give you any kind of feedback but should be done within a few seconds)Please let me know if RemoteCDU works afterwards.Thanks,LarsThese actions have been successful for me.CheersJock -
If I could join here with the same issues as Skip.
I am running the latest ver of QW787 1.4 with P3Dv5.1
All I get of the CDU is the left hand keyboard with no keys etc.
I have gone through the actions listed with the Dispatcher and high res indication, with no results.
I agree with Skip re FSUIPC settings. I too, had to redo mine so QW have definitely done some work with the gauges on the 1.4 update.
This might help you to troubleshoot the issue, Mark.
Happy to send logfiles, if this helps.
Cheers
Jock
-
1 hour ago, brucewtb said:Is EZDOK compatible with P3D5.1 HF1? The question was asked earlier in this thread by someone else but I can't find any replies. Thank you.
Bruceb
Bruce
I do believe that EZDOK Ver 3.1.0.41 works well in 5.1 HF1
Cheers
-
8 minutes ago, snapshot21 said:Yes it definitely works 🙂 just the "sound" folder though. The files that go to the panel folder that relates to the startup sounds do not work, as I think they are specifically coded for the Manfred Jahn C47. But the startup sounds for the AH is good enough anyway 🙂
Thanks for the clarification and 'Panel tip'.
I will give it a shot.
Cheers
-
On 6/12/2020 at 12:42 PM, snapshot21 said:Yup its that. And the soundpack previously linked does fix the problem 🙂
Snapshot21, can you confirm that you have applied the soundpack to to AH DC-3/C47, please.
The readme with the soundpack refers to the Manfred Jahn DC-3/C47. I guess that it could 'fit' with the AH model.
Cheers
-
Good description of what I am hearing. Very distracting.
I have not been to AH's help area about it, yet.
Cheers
-
Hi Alex.
Thanks for the report and vid.
Can you elaborate on 'minor bugs', please?
I am almost set to commit, perhaps.
Cheers
Jock
-
Marius, hello
I have had my Thrustmaster 16000M for over 4 years. Never missed a beat.
I use the 'twist action' for tiller steering and I have CH peddles for the rudder.
Can recommend the Trustmaster.
Cheers
-
Allow me to attempt to explain this, folks.
It is all rather embarrassing!
I did the 4.4 Client update only. Flushed the Shaders and deleted the p3d.cfg, as I believe you should.
The following day, I decided to do ‘Content’ for 4.4.
I did NOT do shaders and the .cfg.
I think this is possibly where I erred.
Since that time, I have had Blue Screens, CTD’s, NTDLL’s abound all pointing to Drivers.
As my vid driver was rather old, I suspected that and updated to the latest release 417.35. I flushed the Shaders but continued to have all above mentioned errors.
For some reason, I also decided to delete the p3d.cfg file as well.
Reasoning can often lead to odd things at my age!!
As already hinted at, on reflection, I believe that it is not necessary to delete the cfg file on a driver change, only Shaders.
Well I did delete the cfg and I think that is what I should have done after the ‘Content’ upgrade.
I guess that is luck but comes with considerable embarrassment.
On the positive side, I have just completed a 2 hour flight YBBN-YMML without a hint of any sys problems.
I am happy and my apologies for confusing the ‘masses’.
Cheers
- 1
-
Thanks for the response folks.
So glad 417.35 is treating you well 'Mulgrave'
I hold my head in shame!
I did a clean install of 417.35 with DDU. Dumped the Shaders folder but forgot to delete the cfg!!
Since done that and I have been flying for 45mins without a hitch.
Not holding my breath but it is looking ok.
Cheers
-
I am running 417.35 and am having some issues.
Just wanting to know if others are experiencing any problems.
Probably did not explain myself that well. Sorry.
-
Folks
I am running Prepar at 4.4
Has anyone had any experience with 417.35 and 4.4?
Alternatively, can anyone give me a fairly late driver version that they are have success with on Prepar 4.4
Appreciate any assistance.
Cheers
-
Alex.
Thank you for your comments and considerations.
Cheers
-
Folks
I have played around with this and it now appears to work! Perhaps a restart did it.
Can you confirm that the smallest difference is 1NM. i.e. you cannot indicate 1.5NM radi. etc.
Given that this is so, is there any chance that 0.5NM increments would be possible in future updates?
Thank you for your attention.
Great piece of software, Alex.
Cheers
-
Victor
Thank you for your response.
This is exactly where I am attempting to change the distance but any change from the default numbers does not appear to take.
Perhaps I am changing the numbers incorrectly or in an incorrect format.
Any assistance would be appreciated.
Cheers
-
Alex, hello
Thank you for your excellent program.
Is it possible to reduce the distance of the range rings below 50NM?
No matter what I place in 'Range Ring Radi for Red Range Rings', it seems to default to the minimum of 50NM.
Appreciate any assistance.
Jock McIntyre
-
Excellent work, Chuck.
I will find these useful.
Cheers
ROTOR_BRAKE PMDG
in AxisAndOhs Support
Posted
Previous quote from April 1st
"You can call the ROTOR_BRAKE directly from the Button Assignment in AAO, and supply the desired value in the numerical field to the right of the event box. "
I can't find any ref to ROTOR_BRAKE in the dropdown menu for Button Assignment.
I am attempting to allocate a button for Arm Speed brakes in the PMDG B738 I have the Event numerical for this.
Any assistance would be appreciated.
Cheers