Fearless

Problem I was having is getting the message “TER ERR” meaning terrain error.

it runs fine one day than the next it is a no goer. Another product not working properly.

18 hours ago, Novej757 said:

I could have sworn I answered this question here.........just noticed that I hadn't.  Maybe I started and never finished......Anyways I use the Flight1 GTN.  However, there are some users that have confirmed the RXP works with the CJ2 mod too.  I can't believe I forgot to include the reference to the original paint.  This livery is a custom version of HB-VRV done by Pascal Kuffer (available in the Avsim library). 

Awesome.. Thanks for that.. Now can I have it already?? 😄

21 hours ago, SAX702 said:

Fred,

Glad you found "the one."  Would like to hear what makes it so.  Perhaps you've flown the real-world aircraft, and if so, what factors in it do you see in the simulation that makes your point?  I don't have the Xtreme Prototypes GLJ Model 25 SE, but have been curious about buying a business jet.  

Dave

Hi Dave,

Never have flown in a real one but between the other jets I had, everything functions to my satisfaction. True that it should not have an auto throttle, I don’t utilise it. It is a new learning curve for me as I’ve been used to automation but apart from installing the Flight1 GTN750/650 I land dead stick (no auto land).

Make a calculated error!! 😄. You’ll better be on the ball to get out of it.

White values for me Ramon.

Thanks for all your efforts.

After spending way too much money on finding a business jet that actually functions as they should, I have finally found the one. It is the Xtreme Prototypes GLJ Model 25 SE. A magnificent Gates Learjet.  I’ve also installed the Flight1 GTN750/650 that works perfectly with the AFCS. Having version 2.1 but so looking forward to the release of version 3.0 due for release early this year. No date set as yet.

I so wish I could obtain refunds for the others.

Thank you very much for the Mod RamonB,

My update..

Everything loaded fine and GTN 750 and FMS info functions great. The only problem I have is the autopilot function. When I press Nav on the AP dashboard it will not activate the flight plan as GPS on the PFD it shows ROLL instead.

I'm not sure what I'm doing wrong.

Part of the aircraft.cfg that needed changing is shown below and highlighted in bold.

//*********************************************************
// CARENADO FA50EX FSX/P3D
// Copyright @ Carenado 2019 - All Rights Reserved
//*********************************************************

[fltsim.0]
title=CARENADO FA50 WHITE -GTN
sim=falcon50_1
model=
panel=gtn
sound=
texture=
kb_checklists=
kb_reference=
atc_id=
ui_manufacturer="Carenado"
ui_type=FA50
ui_typerole="jet"
ui_createdby="Carenado"
ui_variation=WHITE
description="Carenado FA50"
atc_heavy=0
atc_airline=Dassault
atc_flight_number=80
atc_id_color=0000000000
visual_damage=1

[fltsim.1]
title=CARENADO FA50 FGSCL -GTN
sim=falcon50_1
model=
panel=gtn
sound=
texture=FGSCL
kb_checklists=
kb_reference=
atc_id=FGSCL
ui_manufacturer="Carenado"
ui_type=FA50
ui_typerole="jet"
ui_createdby="Carenado"
ui_variation=FGSCL
description="Carenado FA50"
atc_heavy=0
atc_airline=Dassault
atc_flight_number=86
atc_id_color=0000000000
visual_damage=1

[fltsim.2]
title=CARENADO FA50 GKPUQ -GTN
sim=falcon50_1
model=
panel=gtn
sound=
texture=GKPUQ
kb_checklists=
kb_reference=
atc_id=GKPUQ
ui_manufacturer="Carenado"
ui_type=FA50
ui_typerole="jet"
ui_createdby="Carenado"
ui_variation=GKPUQ
description="Carenado FA50"
atc_heavy=0
atc_airline=Dassault
atc_flight_number=50
atc_id_color=0000000000
visual_damage=1

[fltsim.3]
title=CARENADO FA50 MM62029 -GTN
sim=falcon50_1
model=
panel=gtn
sound=
texture=MM62029
kb_checklists=
kb_reference=
atc_id=MM62029
ui_manufacturer="Carenado"
ui_type=FA50
ui_typerole="jet"
ui_createdby="Carenado"
ui_variation=MM62029
description="Carenado FA50"
atc_heavy=0
atc_airline=Dassault
atc_flight_number=86
atc_id_color=0000000000
visual_damage=1

[fltsim.4]
title=CARENADO FA50 N495CX -GTN
sim=falcon50_1
model=
panel=gtn
sound=
texture=N495CX
kb_checklists=
kb_reference=
atc_id=N495CX
ui_manufacturer="Carenado"
ui_type=FA50
ui_typerole="jet"
ui_createdby="Carenado"
ui_variation=N495CX
description="Carenado FA50"
atc_heavy=0
atc_airline=Dassault
atc_flight_number=87
atc_id_color=0000000000
visual_damage=1

[fltsim.5]
title=CARENADO FA50 N502EX -GTN
sim=falcon50_1
model=
panel=gtn
sound=
texture=N502EX
kb_checklists=
kb_reference=
atc_id=N502EX
ui_manufacturer="Carenado"
ui_type=FA50
ui_typerole="jet"
ui_createdby="Carenado"
ui_variation=N502EX
description="Carenado FA50"
atc_heavy=0
atc_airline=Dassault
atc_flight_number=88
atc_id_color=0000000000
visual_damage=1
[General]
atc_type=Dassault
atc_model=Falcon
editable=0
performance=
Category = airplane

[fltsim.6]
title=CARENADO FA50 N5681G -GTN
sim=falcon50_1
model=
panel=gtn
sound=
texture=N5681G
kb_checklists=
kb_reference=
atc_id=N5681G
ui_manufacturer="Carenado"
ui_type=FA50
ui_typerole="jet"
ui_createdby="Carenado"
ui_variation=N5681G
description="Carenado FA50"
atc_heavy=0
atc_airline=Dassault
atc_flight_number=89
atc_id_color=0000000000
visual_damage=1

[fltsim.7]
title=CARENADO FA50 VH-FJF -GTN
sim=falcon50_1
model=
panel=gtn
sound=
texture=VH-FJF
kb_checklists=
kb_reference=
atc_id=GKPUQ
ui_manufacturer="Carenado"
ui_type=FA50
ui_typerole="jet"
ui_createdby="Carenado"
ui_variation=VH-FJF
description="Carenado FA50"
atc_heavy=0
atc_airline=Dassault
atc_flight_number=55
atc_id_color=0000000000
visual_damage=1

[autopilot]
autopilot_available=       1 
flight_director_available= 1
direction_indicator=       1
attitude_indicator=        1
default_vertical_speed=    0
default_pitch_mode=        0
default_bank_mode=         0
autothrottle_available=    0 
autothrottle_arming_required= 0
autothrottle_max_rpm =     0
autothrottle_takeoff_ga=   0
pitch_takeoff_ga=         14        
max_pitch=                  20
max_pitch_acceleration=    1.0
max_pitch_velocity_lo_alt= 2.0
max_pitch_velocity_hi_alt= 1.5
max_pitch_velocity_lo_alt_breakpoint=20000.000000
max_pitch_velocity_hi_alt_breakpoint=28000.000000
max_bank=                30, 15
max_bank_acceleration=1.800000
max_bank_velocity= 3.000000
max_throttle_rate= 0.100000
nav_proportional_control=12  
nav_integrator_control=0.25 
nav_derivative_control=0.00
nav_integrator_boundary=2.5
nav_derivative_boundary=0.0
gs_proportional_control= 25   
gs_integrator_control= 0.53   
gs_derivative_control=  0.0
gs_integrator_boundary= 0.7
gs_derivative_boundary= 0.0
yaw_damper_gain=        1.0
yaw_slip_control_gain=0.000000
yaw_control_uses_trim=0.000000

[deice_system]

structural_deice_type=1 // RBE FIX ERA 0 

Message sent. So looking forward to it.

Cudos RamonB,

I have the Flight1 GTN750 version and have FSX-SE

Worked it out by finding out the synthetic vision system ceased working.

I tried to reactivate it but now have Terrain load failure.

Another issue on my list for reporting. 😞

Greetings,

Can anyone advise what that nuisance ERR: 11 means on the G1000 PFD screen?

I’m currently enroute to YPPH and the message suddenly appeared.

Thanks in advance.

Hi all,

Can anyone advise on the following:

1. Does the Yaw Damper function work?  When I press it, it still shows as being off and can't notice the difference.

2. Are there Spoilers /Speed brakes that work?  Apparently it is automatic but doesn't seem to be simulated.

3. Does the TO/GA function work? I tried by pressing the TO/GA button but nothing seem to happen. I believe this function only works if an auto throttle function is available.

4. The Cabin light switch at the top panel doesn't work. Is that evident with other owners?

Thanks in advance.

That Navigraph Extension is a big disappointment imho. I have it myself and having to manually add flight plans and with no capabilities to save is a real turn-off. SafeTaxi database would also be great to have just like the Flight1 GTN750 and I presume the RXP version has also.

Will Carenado ever make it user friendly is a big ???

I so would love to see this fixed. As for procedures, when I create a flight plan, I leave them out. I find it too difficult to change the settings and it just messes up my flight plan.

I’m so hoping to obtain the Mod developed by Novej757 when it is finished (see the post ‘Out of The Ashes: The New Black Phoenix Phenom 100E GTN-750 Mod’) which looks like to be a extraordinary addition to say the least.

Hi all,

I was wondering if anyone has a repaint with Australian registration. VH-???

Thanks in advance.

Just wondering Novej757, Which GTN750s have you implemented,  Flight1 or RXP? and

Where can I get the repaint from? 😄

I agree.. The Flight 1 G1000 integration in their aircraft has no issues with flightplan importing and easily updates Nav cycles.

It does however use the latest G600 series database downloaded from Garmin

On 3/8/2019 at 1:54 PM, Novej757 said:

 

So what do you guys think???

 

Absolutely magnificent. I so look forward to another version and hope to be able to obtain the mod.

Me want it already!!! 😄

Cudos Novej757. BIG thumbs up.

Hi all,

I was wondering if the SafeTaxi database will be added to the Navigraph E50P Phenom 100 Extension Pack for FSX/P3D?

Thanks in advance.

Fred

Hi team,

I know this question has been asked before a few years back but is there a virtual airline that caters for the props specifically the C182 or Piper Comanche 250?

Regards,

Fred

Well I received a response from a Carenado re the gps. They said turn off the 2D panel. Then it should work. Looks like no fix for this is in the pipeworks.

This is the actual message received.

Quote

Greetings,
If you turn off the 2D popup panel. the 3D visturla cockpit works?
Regards

Carenado.

Very disappointed.

Firstly, the aircraft looks magnificent but I’ve encountered issues which I don’t know how to correct.

The PFD of the G1000 is not communicating with the MFD or visversa. This is a nuisance as when you open the 2D panel of the PFD, all works properly. This issue is with or without SVS installed.

The SR22 is meant to have a ceiling of 25000 ft with cruise speed of around 185kts. I’m lucky if it reaches 10000 ft with VS of +500 engines thrust set at 100% and struggling to maintain 130kts.

It would be greatly appreciated if I could obtain some advise on how I can get these problems resolved. My other turbo props have no problems reaching Altitude ceiling and cruise speed. But for the G1000, is there a fix for this.

I have FSX-SE installed and all installations and downloads were done with antivirus off.

Thanks in advance.

On 11/29/2017 at 11:20 PM, JusticeAA said:

On the SR22 v2.1 update with Synthetic Vision the gps is not showing on the HSI/CDI display correctly in the virtual cockpit (always points to 000).  The odd part is that it show properly in the 2d Panel view.

 

Edit: Actually there seems to be a complete disconnect between the left and right panels.  No flight plan or path is shown...

Just bought it today and same issue. Any help would be appreciated.

Hi all,

When I purchased the Alabeo C310R II yesterday, it gives the option to use the installer supplied to add the RXP GNS 530.

Details are:

Quote

REALITY XP INTEGRATION
This aircraft has the feature of changing ONLY the default Alabeo GNS530 (COM1/NAV1) for the Reality XP GNS530.
You need to have the Reality XP GNS530 installed in your computer before making this modification.

Quote

PREPARING THE AIRCRAFT FOR REALITY XP GNS530
Double click on the RXP530.exe file which will modify the aircraft configuration changing the default Alabeo GNS530 with the reality XP GNS530. YOU MUST HAVE INSTALLED REALITY XP GNS530 IN YOUR COMPUTER.
THIS INSTRUMENT IS SOLD SEPARATELY (www.reality-xp.com).

 

Reality XP now has the GNS 530W which is the latest version.  Will the installer configure the 530W or is it not compatible?

Thank you in advance.

Fred

Just throw out some cargo.. that'll fix it :(

The manuals/tutorials are typically the last thing we do during development - I can't say for certain, but we usually try to make them available before hand. I have no idea on the hard copy manuals yet either, sorry - I know those didn't sell as well as we'd hoped with the MD-11 though, we only sold a handful of them.

Amazing, the lighting effect gave it away on the bottom pic.Looking forward to the release on the hope that it does have 2D panels also :(

It works in pretty much the same fashion as every other CDU: Crank up the APU so you have power, align the IRS, set the departure and arrival airports and then load up a flight plan you have created. About the only way it could it be any less hassle than that, is if you got someone to click the mouse button for you.Al