benne36

Hello, I have a problem with your software "SIMFLYPAD A320 PREMIUM PANEL MSFS" or with the connection between PC and tablet. I bought your software through Simmarket. First I installed the “SimFly Linker” program on the PC and installed the two plugins (FDR and Core). They can also be found in the MSFS Community. The WASM module is also installed in this folder. The "FenixQuartz" is also installed on my PC and the directory is specified in the "SimFly Linker". My WiFi connection is set to the private network and everything is displayed with green dots in the “SimFly Linker”. I downloaded and installed the APP (Android) “simfly pad” from Google Playstore on my tablet. I created an account in the app and entered the name for the Simbrief. The tablet is active over the same network. My goal was to use this software for the FENIX. Now my questions or problems. 1. Does your software work on Android tablets? Or is this only intended for iOS. 2. Unfortunately I can't see MCDU like in your movie or the overhead and stuff like that. How can I get this on the tablet? I only have 4 buttons in the app, such as Settings, Records, Camera and Checklists. In your PDF instructions I can't figure out how to do this on an Android tablet. Thank you for an answer. Greetings Rene from Germany. This entire text was translated into English by a translation program because unfortunately I am not very good with the English language.

Hello Bryan! I am a big fan of your products and first of all I would like to say thank you very much. Now a question about the latest products for the Fenix with animated copilots. When taking off, the command comes from the co-pilot Gear Up. If I'm not mistaken, the other products (button) have the option to retract the gear with the secondary key. But that's not the case with this product. You can still do it manually using the manual option, but it's cumbersome. In the settings I didn't tick "DIS.GEAR/FLAP/SPOIL CTRL". Flaps works the same way as spoilers. Can you check this or am I doing something wrong? Thanks Benne

Hello Bryan, I have seen your site for a long time and noticed that you have done everything from scratch. Now I have two questions. 1. Here on the topic someone says that they had problems registering for the new page. Can I use my email address from my account on the old site or do I have to use a different one. 2. I was planning to buy software for the P3D that I was missing. Unfortunately, this is now only possible on the new page. You offer this as "FS2Crew: FSX / P3D All Access Pack". But I've already bought most of them all these years, I only need one of them. Isn't there a single one to buy now? Otherwise I'll pay again for the ones I already have? Thanks for an answer and best regards Benne

Hello, I hope one of the Pilot2ATC users can help me here. I'm sure you've been asked several times before, but I wanted to know which traffic program really works with the Pilot2ATC. I mean, that Pilot2ATC recognizes the traffic in its instructions or also on the map. I own the programs WT 3 and JARdesign x-Life Deluxe. Neither of the two traffic programs I can see in Pilot2ATC. For the WT 3 I have activated World Traffic in x-plane 11 at AI. In Pilot2ATC the two buttons for Airplane are on. If I use x-Life Deluxe (have WT3 switched off), I don't know how to see them in Pilot2ATC. But in x-plane 11 you can see all traffic planes (depending on the traffic program). Also the recognition of the traffic does not work with instructions from Pilot2ATC. Example: Airplane in landing approach, tower gives nevertheless the release for takeoff. So, it does not recognize the flying Traffic. Does anyone know about this in Pilot2ATC and can give me some hints? Or maybe the program Traffic Global is better? Thanks for one or more answers. Greetings Benne

Hello, Byran, I have a problem with the settings in the Aircraft Profile. It is the slide controls of the ByPass PIN Agent Left and Right. These cannot be moved with the mouse. The only thing that works at the gate is the Marshaller POV This can be moved. Following info: Tested with PMDG 777, 737 NGX-U Aircraft. Tested at any airport. At the gate I set the Marshaller POV and saved it as written in the PDF manual. Then I set the aircraft on the runway as recommended in the PDF and wanted to set the ByPass Pin Agent, but the controls can't be moved. I tried it with engine on and parking brake, then without engines with parking brake or without parking brake. In no variant the ByPass Pin Agent can be moved. Can you check this or give me a hint what I am doing wrong? As I said, it does not work on any PMDG aircraft. Thanks and regards Benne

Here you are. Serve all our hobby. It's a great job you guys are doing. Greetings benne😉

Okay, but then why version 4.13 when there is already 4.14, which also worked? But thanks for your quick answer dear Scot. Happy Sunday, greetings benne

Wrong action file in the zip file of version 4.15 The file is version 4.13 from 21.11.2019 Please check. Thanks

😉😊👍

Hello everybody and a happy new year! unfortunately I have discovered two more small mistakes during my tests. In EFIS Capt and FO both\FD both\VC_GSLD_BOTH_EFIS_FD_on and VC_GSLD_BOTH_EFIS_FD_off as well as VC_GSLD_BOTH_EFIS_LS_on and VC_GSLD_BOTH_EFIS_LS_off. Contained now: FD: function VC_GSLD_BOTH_EFIS_FD_on () VC_GSLD_FO_EFIS_FD_on () VC_GSLD_FO_EFIS_FD_on () end function VC_GSLD_BOTH_EFIS_FD_off () VC_GSLD_FO_EFIS_FD_off () VC_GSLD_FO_EFIS_FD_off () end LS: function VC_GSLD_BOTH_EFIS_LS_on () VC_GSLD_FO_EFIS_LS_on () VC_GSLD_FO_EFIS_LS_on () end function VC_GSLD_BOTH_EFIS_LS_off () VC_GSLD_FO_EFIS_LS_off () VC_GSLD_FO_EFIS_LS_off () end I think it's supposed to be like this, don't you? FD: function VC_GSLD_BOTH_EFIS_FD_on () VC_GSLD_CP_EFIS_FD_on () VC_GSLD_FO_EFIS_FD_on () end function VC_GSLD_BOTH_EFIS_FD_off () VC_GSLD_CP_EFIS_FD_off () VC_GSLD_FO_EFIS_FD_off () end LS: function VC_GSLD_BOTH_EFIS_LS_on () VC_GSLD_CP_EFIS_LS_on () VC_GSLD_FO_EFIS_LS_on () end function VC_GSLD_BOTH_EFIS_LS_off () VC_GSLD_CP_EFIS_LS_off () VC_GSLD_FO_EFIS_LS_off () end If possible please also change in the next versions. Thanks a lot benne Hallo an alle und ein gesundes neues Jahr! ich habe leider bei meinen Tests zwei weitere kleine Fehler entdeckt. Und zwar in EFIS Capt and FO both\FD both\VC_GSLD_BOTH_EFIS_FD_on und VC_GSLD_BOTH_EFIS_FD_off sowie VC_GSLD_BOTH_EFIS_LS_on und VC_GSLD_BOTH_EFIS_LS_off. Enthalten ist jetzt: FD: function VC_GSLD_BOTH_EFIS_FD_on () VC_GSLD_FO_EFIS_FD_on () VC_GSLD_FO_EFIS_FD_on () end function VC_GSLD_BOTH_EFIS_FD_off () VC_GSLD_FO_EFIS_FD_off () VC_GSLD_FO_EFIS_FD_off () end LS: function VC_GSLD_BOTH_EFIS_LS_on () VC_GSLD_FO_EFIS_LS_on () VC_GSLD_FO_EFIS_LS_on () end function VC_GSLD_BOTH_EFIS_LS_off () VC_GSLD_FO_EFIS_LS_off () VC_GSLD_FO_EFIS_LS_off () end Ich denke, es müsste so sein oder? FD: function VC_GSLD_BOTH_EFIS_FD_on () VC_GSLD_CP_EFIS_FD_on () VC_GSLD_FO_EFIS_FD_on () end function VC_GSLD_BOTH_EFIS_FD_off () VC_GSLD_CP_EFIS_FD_off () VC_GSLD_FO_EFIS_FD_off () end LS: function VC_GSLD_BOTH_EFIS_LS_on () VC_GSLD_CP_EFIS_LS_on () VC_GSLD_FO_EFIS_LS_on () end function VC_GSLD_BOTH_EFIS_LS_off () VC_GSLD_CP_EFIS_LS_off () VC_GSLD_FO_EFIS_LS_off () end Wenn möglich bitte ebenfalls in den nächsten Versionen ändern. Vielen Dank benne

An die Programmierer. Ich habe einen kleinen Fehler in den FSLabs A320 bemerkt. Unter dem Punkt ADIRS - ADIRS1 wurde ein V vergessen zu schreiben. Hier: Funktion VC_OVHD_ADIRS_1_att () local SwVar = "VC_OVHD_ADIRS_1_Knob" local VarInc = 72001 local VarDec = 72000 local SLT = ipc.readLvar (SwVar) wenn SLT = = 0 dann ipc.control (FSL, VarInc) ipc.sleep (10) ipc.control (FSL, VarInc) elseif SLT == 10 dann ipc.control (FSL, VarInc) end VC_OVHD_ADIRS_1_show () end Bitte ändern Sie dies in den nächsten Versionen. Danke und ein frohes neues Jahr benne To the programmers. I noticed a small bug in the FSLabs A320. Under the item ADIRS - ADIRS1 a V was forgotten to write. Here: Function VC_OVHD_ADIRS_1_att () local SwVar = "VC_OVHD_ADIRS_1_Knob" local VarInc = 72001 local VarDec = 72000 local SLT = ipc.readLvar (SwVar) if SLT = = 0 then ipc.control (FSL, VarInc) ipc.sleep (10) ipc.control (FSL, VarInc) elseif SLT == 10 then ipc.control (FSL, VarInc) end VC_OVHD_ADIRS_1_show () end Please change this in the next versions. Thanks and a happy new year benne

Hallo! Ich habe ein Problem mit dem Aerosoft A330 pro und Linda. Seit den Update von Aerosoft A330 pro auf der Version 1.0.0.4, findet Linda nicht mehr den Flieger bei mir. Sync To Sim ist wie immer Orange umrandet. Habe dann mal versucht ein neues Modul zu erstellen, aber bei New, findet Linda nur die A318-A321 und die A330 kann man nicht auswählen als Aircraft. Auch das hier vorbereitete Modul funktioniert für den Aerosoft A3XX Pro nicht mehr bzw. wird nicht mehr gefunden. Die anderen, A318 -A321 haben kein Problem und werden auch angezeigt. Kann das jemand bestätigen oder liegt das an dem Update von Aerosoft. MfG benne36

Hello, Byran! first of all thanks again for the new software of the PMDG NGXu. But I found a small problem. In the Voice SOP2 you can give the command "SET DOME LIGHT...". Now the command doesn't exactly happen the way you give it. I would like to describe it: The switch is set to Off (middle). If you give the command "SET DOME LIGHT On", the switch goes to DIM (above). But if you say the command "SET DOME LIGHT Off", the switch goes briefly to "Off" (middle) and then further to "BRT" (bottom). If you say "SET DOME LIGHT Off" again, nothing happens anymore. Only when you give command "SET DOME LIGHT On" again, the switch goes to "Off" as you wanted it with the command before. I would be happy if you take a look at it. Is it possible to program the switch with the command "Off, dim and brt" and the matching command? Thank you benne

Thank you. Now it works without problems. You can change without it changes. Many thanks

Support ticket sent. Do you need the ticket ID given there?

Thank you for your efforts. Super software from you.

here the link to the little movie https://mega.nz/#!dEwSharY!PI_ZU6YoiTq0CV0APFQB4IQ5hnanI_9YwkChdWRZ9h8 about google https://drive.google.com/open?id=1_aCzDbuzsLfE-Brvq7VBOw068g1mAh_W

Hello, I would like to address an already mentioned mistake again in the CONIG-CALLOUTS. It is the option 1000 Feet (Approach) setting. If you only go to the page CONFIG-CALLOUTS and the option is for example NO and this is not changed, now just another button, for example to DEP, then back to CONFIG-CALLOUTS, an unintentional change of the Option 1000 Feet (Approach). It automatically switches between YES and NO. Again and again when you leave the menu and go back. Please check and change if possible. You never know which setting of this option is really active then. If you want that, I can shoot a small movie and send it to you to watch. Thanks, benne36

Hello, I am trying to extend an already existing module with a plane. My question is, how do I find out the button or switch number. I do not mean the LVARS, but the number to the control. small example of the Majestic DASH is the control number 51406 for the knob "NAV Source". Is there a way to get this control number out? I would be glad about an answer or solution. LG Benne german: Hallo, ich probiere gerade bei einen Flugzeug schon bestehendes Modul mir zu erweitern. Meine Frage ist, wie finde ich die Button oder Schalter Nummer heraus. Ich meine nicht die LVARS, sondern die Nummer zum Control. kleines Beispiel der Majestic DASH ist für den Drehknopf "NAV Source" die Controlnummer 51406 angegeben. Gibt es eine Möglichkeit, diese Controlnummer heraus zu bekommen? Würde mich über eine Antwort bzw. Lösung freuen. LG Benne

german: Hallo, ich wollte mal wissen, ob die Macros mit Linda im P3D v4.1 funktionieren. Habe mir damals mit dem FSX Macros erstellten für einige Flieger (PMDG). Hatte Sie über Linda Editor mit eingebunden und Sie funktionierten auch im FSX. Leider aber funktionieren sie nicht mit dem P3D v4.1. Hatte die Befehlszeile "ipc.macro ("xxxx) benutzt. (xxx ist nur ein Beispiel). Kennt jemand einen anderen Befehl, damit ich die Macros wieder benutzen kann? Vielen Dank, benne36 english: Hello, I wanted to know if the macros work with Linda in the P3D v4.1. At the time I was using the FSX Macros for some aviators (PMDG). She had been involved with Linda Editor and she also worked in the FSX. Unfortunately, they do not work with the P3D v4.1. Had the command line "ipc.macro (" xxxx) used. (xxx is just an example). Does anyone know another command so that I can use the macros again? Many Thanks, benne36

Paul, please only copy in the German text above. There is an error in the english text. And important, the info of ScotFlieger you have to change by hand still starting. benne

Hello Paul! I must be something enlightened. My file created by myself for LINDA or better edited file, has been made by me only for the extension. It has nothing to do with the original files you get here. I have only changed them for my own purposes. These functions, made there, are the work of the Captian according to a checklist, which the Captain actually makes in the cockpit. It has only been made by me to expand the flow, mainly in connection with the FS2Crew. It also works "without" FS2Crew. Only then do you have to take over the role of the FO if you want to have it real. That's all. You can also say I'm working to foul the things with mouse. Therefore my file. I hope you understood it a bit. If this is for you nothing, then please download the file here in the forum. This is the original file, without my extension. by Benne36

Hello Paul! Thank you for your interest. There is no problem to give you this file. I have to say, however, that the functions I created myself are connected to the FS2Crew. I've also written an Excel file with flow, so this is done at the right time. Unfortunately only in German, if you can the language, I can give you this also. The file for Lua you need only in Module / Linda / aircrafts / PMDG 737 copy. But make a copy of your original. My own created functions are then completely to the end under "FS2Crew". Then simply assign in Linda the joystick buttons according to your choice and execute. As I said, in the beginning comes the first question, whether you want to execute the funtion or not. Simply press the J or N button. If you want to have the files, short info to me. by benne36

Hello ScotFlieger! Thanks a lot for your quick help. I tried it and it worked. by benne36

German: hallo, ich habe folgendes Problem. Ich bearbeite so eigene Programmierungen meiner Flugzeuge. Im FSX war auch alles ohne Probleme. In P3Dv4 funktioniert es leider nicht mehr. Beschreibung: Ich habe mir am Anfang einer ausführbaren Funktion im FSX folgendes eingesetzt, um die Funktion mit einer Taste dann zu starten, entweder mit J zum starten oder N zum nicht starten. Wenn die Funktion dann gestartet wird, öffnet sich zuerst ein grüner Balken mit roten Text, der mich fragt, ob ich die Funktion ausführen möchte und das LUA Display ist auch zu sehen. Hier einmal ein Auszug für die PMDG 737 NGX zum für den Start Preflight: ----------------------------------------------------------------------------------------------------------- function Preflight () -- set general sleep time between sleepVal = 100 ipc.display("Preflight initiated...") ipc.sleep(2000) questvar = ipc.ask("Captain, do you want to go Preflight? (j / n)") if questvar == "j" then ipc.display ("Please wait, going Preflight!") ipc.sleep(250) ---------------- start sleepVal = 100 s1 = 200 s2 = 400 ipc.sleep(2000) DOOR_AFT_L_CARGO_ALL_open () ipc.sleep(2000) NGX_DOME_bright () ipc.sleep(2000) NGX_LIGHT_ALL_on () ipc.sleep(2000) NGX_FLOOD_ALL_on () ipc.sleep(2000) NGX_LIGHT_CHART_AND_MAP_ON () ipc.sleep(2000) NGX_EFIS_NAV1_vor () ipc.sleep(2000) NGX_EFIS_NAV2_vor () ipc.sleep(2000) NGX_EFIS_FO_NAV1_vor () ipc.sleep(2000) NGX_EFIS_FO_NAV2_vor () ipc.sleep(2000) NGX_EFIS_ND_RNG_TFC () ipc.sleep(2000) NGX_EFIS_MTRS () ipc.sleep(2000) NGX_EFIS_FO_MTRS () ipc.sleep(2000) NGX_AP_FD1_on () ipc.sleep(2000) NGX_AP_FD2_on () ipc.sleep(2000) NGX_CDU_open () ipc.sleep(2000) ---------------- end ipc.display("Preflight READY!\n Thanks for your patience, Captain!") ipc.sleep(2000) ipc.display ("") ----negative -------------------------- elseif questvar ~= "j" then ipc.display("Ok, was just a question, Sir!\nHave a nice day...") ipc.sleep(2000) end ipc.display("") end ------------------------------------------------------------------------------------------------------------- Im P3Dv4 wird zwar die Funktion ausgeführt und das Fenster (heisst jetzt im P3Dv4 "SimConnect Message Window") öffnet sich, aber das Fenster schließt sich nicht mehr von alleine, nach dem die Funktion bestätige habe. Ich hätte das aber gerne so wie im FSX, das sich im P3Dv4 das LUA Dislpay von alleine schließt. Kann mir da einer Helfen, wie ich das im Editor schreiben kann, damit sich das Fenster wieder von alleine schließt? Danke im voraus. MfG benne36 English: Hello, I have the following problem. I thus work on my own programming of my aircraft. In the FSX everything was without problems. In P3Dv4 it does not work anymore. Description: I have used at the beginning of an executable function in the FSX the following to start the function with a key, either with J to start or N to not start. When the function is started, a green bar opens with red text asking me if I want to run the function and the LUA display is also visible. Here is an excerpt for the PMDG 737 NGX for the launch Preflight: -------------------------------------------------- -------------------------------------------------- ------- function Preflight () - set Warenkorb non reviews between sleepVal = 100 ipc.display ("Preflight initiated ...") ipc.sleep (2000) questvar = ipc.ask ("Captain, do you want to go to Preflight?") if questvar == "j" then ipc.display ("Please wait, going Preflight!") ipc.sleep (250) ---------------- begin sleepVal = 100 s1 = 200 s2 = 400 ipc.sleep (2000) DOOR_AFT_L_CARGO_ALL_open () ipc.sleep (2000) NGX_DOME_bright () ipc.sleep (2000) NGX_LIGHT_ALL_on () ipc.sleep (2000) NGX_FLOOD_ALL_on () ipc.sleep (2000) NGX_LIGHT_CHART_AND_MAP_ON () ipc.sleep (2000) NGX_EFIS_NAV1_previous () ipc.sleep (2000) NGX_EFIS_NAV2_previous () ipc.sleep (2000) NGX_EFIS_FO_NAV1_previous () ipc.sleep (2000) NGX_EFIS_FO_NAV2_previous () ipc.sleep (2000) NGX_EFIS_ND_RNG_TFC () ipc.sleep (2000) NGX_EFIS_MTRS () ipc.sleep (2000) NGX_EFIS_FO_MTRS () ipc.sleep (2000) NGX_AP_FD1_on () ipc.sleep (2000) NGX_AP_FD2_on () ipc.sleep (2000) NGX_CDU_open () ipc.sleep (2000) ---------------- end ipc.display ("Preflight READY!" Thanks for your patience, Captain!) ipc.sleep (2000) ipc.display ("") ---- negative elseif questvar ~ = "j" then ipc.display ("Ok, what just a question, sir! \ nHave a nice day ...") ipc.sleep (2000) end ipc.display ( "") end -------------------------------------------------- -------------------------------------------------- --------- In P3Dv4 the function is executed and the window (now called in the P3Dv4 "SimConnect Message Window") opens, but the window no longer closes by itself after which the function has been confirmed. I would like the FSX, which in the P3Dv4 the LUA Dislpay by itself close. Can one help me as I can write in the editor, so that the window closes by itself? Thank you in advance. by benne36