abh_jc_03

How would I check for a corrupt file or fix it?  Packs and engine bleeds were on. 

Everytime I fly the NGX I get the master caution light and when I look at failures I have 1, "PAX 02 MASKS DEPLOYED."  I set my cruise altitude in the panel and I only had a V/S of 1600 ft. Right above the pressurization it shows a "auto fail" light.  My FLT ALT and LAND ALT all have dashes across the display. Anybody else have this problem or have a solution?

Everytime I fly the NGX I get the master caution light and when I look at failures I have 1, "PAX 02 MASKS DEPLOYED."  I set my cruise altitude in the panel and I only had a V/S of 1600 ft. Right above the pressurization it shows a "auto fail" light.  My FLT ALT and LAND ALT all have dashes across the display. Anybody else have this problem or have a solution?

What setting do I need to use to increase how far textures can be seen?  I don't see my airports until a few miles back and sometimes I don't even see the PAPI lights until almost touchdown.  What do I need to change to increase the distance?

I have ran into several default airports in FSX and I have deleted the MTX bgl files but I am still getting duplicate towers. For instance I was at KPDX in Portland and There were are two towers side by side.  each hold short has two lines and different textures.  Taxiway signs in the middle of the taxiways.  Usually this is a sign of a duplicate AFCAD but I have used the Airport scanner program and it found nothing.  Any thoughts?

I have been trying to input a flight plan but been having issues.  I installed the most recent airac cycle and the G1000 shows it when it loads up.  I can input waypoints but I can't choose any departure procedures.  For example:  I was at KSEA and when I hit proc button all there is to highlight is select approach.  I know there are SIDS at the airport yet it won't pull up on the G1000.  It seems glitchy to me.  I can hit the procedure button when in my flight plan and nothing loads until I am out of the flight plan page.  Any help would be appreciated.  I read about the navigraph issue from the expansion pack but I seem to have no issues with mine loading.  All the VOR,NavAids,Waypoints etc show up.  

Yes set to max. Not sure what's going on.

This is probably a stupid question, but why do the ALS lights not light up at night. I see a lot of them modeled but don't light up. Just the PAPI lights. Even a lot of 3rd party airports have great detailed lights but don't light up. Just curious if I'm missing a setting or something.

https://s21.postimg.org/82l7meyzr/gtn_mod1.jpg

https://s13.postimg.org/9o5p41i5j/gtn_mod2.jpg

These are two pictures I took showing I saw no cab files to extract.  Therefore I don't know what to do.

The problem is there is no cab files in the 1.6 mod folders. That's probably where I'm going wrong.

I have looked at each step over and over trying to figure it out. I did an uninstall of the CJ2 and going to try again.

I apologize for the inconvenience of this message.

I was trying to follow the instructions and I found the .cab files in the fsx gauge folder. It said to extract the cab files from the mod to that folder. There is not any cabs to extract. I created folders with the same name and added gauges at the end of each folder. I extracted the .cab folders that were already in fsx to the folders that I labeled gauges at the end. It never asked for any overwrite like the read me stated. I did everything else and it went as the readme stated would. I ran FSX and the aircraft had the GTN in the panel and had the clickspots for heading,v/s etc. but the actual PFD is black and when I go to click on the GTN it doesn't let me click anything. I don't know where I went wrong. Anyway to help me understand this any better? Sorry again.

Is there a fix for why when I'm parked with engines off there is still althe animation of thrust blowing behind my aircraft?

I can't click on eng or arm to set altitude or vs. how am I suppose to set that when there is no hand to click it?

Is it safe untick my Fsdreamteam and flightbeam airports in the scenery library to save on VAS? FSX loads all the sceneries even I'm not using them. I don't want any conflicts of when the next time I choose to fly at one of their airports the buildings are missing etc.

I am wondering if it is okay to untucked boxes that I don't you. For instance if I'm flying PNW can I untick my FSX global and airports I'm not currently using? I am trying to avoid OOM which so far I keep getting. I know FEX has to load all those sceneries even if I'm not flying them which uses extra VAS.

I found out my throttle axis was assigned in fsuipc and fsx controls. My profile was undereally my C182 profile. I don't know if that was the case, but I tried another flight out of Tampa with a TAT I'd 27c with no issues. I hope that was the culprit.

I don't remember what the OAT was but I was on the ground at Tampa international. I had a cruise altitude of FL340 but it wouldn't pass 7000. After flying for an hour or so the TAT was down to 12, but still more airspeed was 186. I shut FSX down a few times and ASN hoping it would fix it but it didn't. My 2.5 hr flight was over 5 hours long.

I already have ASN.

I understand that high TAT causes climb rate issues. What am I suppose to do when this occurs? I'm at Tpa and my TAT is 35c. I can't exceed 199 knots level flight. Is there something I need to do to work around that?

I have read on some posts about the High TAT is related to ASN. Can anybody confirm this? I have now twice tried taking off in my pmdg 737 and the TAT is +33c. I can't climb. I got up to FL180 but only 178 knots. Can anybody help. I have the most up to ate service pack.

That's awesome. I hope they give a discount to previous.

What is Plan-G?

I saw that I'd have to install fsx and both SP on both computers but wouldn't that lose all my files and installs? Or because I already have that installed would I just need to install it on my laptop?

Great. How do I go about setting it up? I have never did anything like this before.

The only scenery I have is FSDREAMTEAM KORD. I don't know of any others.

Just wanted to update. I deleted that file and now everything is back. Thank you!