Chris Zubris

Sirs, Sorry, I clicked the Post button twice accidentally. This is the 737 forum, correct me if I'm wrong but there is a Virtual Cockpit (2D) View. When I start a flight on the Rwy, I need to press: Ctrl - Shift - Q which raise's the Cockpit view, Up, Picking the nose of the aircraft up. ( its Zulu time 4000 Forum construction) Is there a setting in [Camera Definitions] that will raise the Planes nose. Thank you and Sorry...Chris Z EDIT: Sorry sirs, forgot to change the monitor setting and uiautomation.core. Problem Solved thank you Sir.

Sirs, Every time I start a flight, from the Virtual Cockpit (2D) I need to Press: Ctrl-Shift-Q to raise the nose of the Plane out of the Rwy. Is there a setting to prevent this from happening. Or can I change something in Camera Definitions to finally resolve this. Thank you...

Sirs, Im rebuilding my whole system, new Scenery, Airports, etc. And I'm changing Brands (I want to use AS Airports and my PMDG Aircraft,NGX737, 747-400,800,Dream,MD-11,B777). Could you possibly tell me what Scenery, and other Add-ons you suggest, I'm looking for a Build without, CTD's and OOM's (Out of available memory messages). Any advice would be great. Thank You...

Sir, I hope I'm going about this in the proper manner, I only want to delete the message on start up "Your product is out of date. Do you want to update". Its the message that Pops up on the Splash screen. How do I uninstall it. Thank you...

Sirs, 1 question, How do I delete (get rid of) the FS2Crew message upon Start (Splash Screen)of FSX. I installed the RAAS it's great !

Sirs, I have a few questions, One I'm having a problem with Views. When I start a Flight looking out the Window over the Glare shield the Nose of the aircraft is pointing Down in the Rwy. I need to Press Ctrl +Shift+Q to bring the View back UP to where it belongs. Is there any way in "Camera Definitions" Possibly under InitialXyz= or any other Heading, That will correct this Problem ? Another question, I'm starting a new build, my question is about MBoards I have narrowed it down to 2 boards, The Aus.. Maximus Hero VI or the PRO Motherboard's. Thank You for taking the time to read this.

Sirs, Is there any Update, Patch, or Package that might be able to created a 2D Panel ? Or is 2D gone. Do you know any Tutorial's on using the PMDG programs in 3D Mode ? Thank You ?

Sirs, Just purchased the B777 great ! Looking through the Manuals and can't find how to get into 2D Mode, could someone hint me ? Running mint on my Machine... Thank You CLZ..

Sir, No I'm partially using MS Essentials, If security is the subject, it's not on. Anymore explanation's or Help would be great. Why is the Sim doing this any Idea's. Thank You...

Sir, I tried the Uiautomationcore. dll File (I have it installed already). But I haven't done the File with the Command Prompt, Actually I forgot how it's done. I also tried unchecking "Prompt on Exit" setting. With no success. I have tried Different ways to uninstall, and other ways to reinstall. I have tried Installing with my Firewall On and Off. Also tried Hidden files with the Files hidden and un-hidden, I have all MS Files up to date, and the Direct X10 Is of greater value. Is there a File somewhere I'm missing ? It's very odd what it does, The Free Flight Windows only appears on the corner of the screen. I've never had this happen before. Any more Idea's would be Great... Thank You....

Sirs, I'm having a problem with the "Validation Menu" (Free Flight) when LEAVING through "End Flight". It ends up in the corner of the Screen (Monitor). Then when pressing Esc to exit It Crashes to desktop (CTD) with a Fatal Error message, Then a Restart Message. I have tried a lot of remedy's and nothing seems to clear the problem. Any Idea's would be great. Thank You.

Sirs, I'm having a problem with the "Validation Menu" (Free Flight) when LEAVING through "End Flight". It ends up in the corner of the Screen (Monitor). Then when pressing Esc to exit It Crashes to desktop (CTD) with a Fatal Error message, Then a Restart Message. I have tried a lot of remedy's and nothing seems to clear the problem. Any Idea's would be great. Thank You.

Sirs: How many years have I been waiting, Constantly, and Patiently. Checking your website in hope that the new B777 will be there. I really have a lot of fun using all these Programs. Is there anyway to tell when this new 777 will be coming out ? Thank You and I'm sorry if me asking is a problem. I gather assembling these programs isn't easy. Thank You Sirs...

Sirs: I'm re-installing FS2004 and the same problem has happened. When leaving a flight pressing (ESC), the Sounds (Engine, environment, wind, etc.,) Seem to persist (continue) through "End Flight". I tried in the above thread to remedy this problem. But no help. The problem is the Sounds still continue through Exiting the sim. Thank you for taking the time to read this, Any Idea's ???

Sirs: I seem to have a small simple problem of Sounds, When Im leaving flight (pressing ESC). The sounds (engine, enviroment, wind) seem to persist through End Flight. The plane works fine. To try to work my way around this problem, I have uninstalled FS 2004 (by PMDG instructions) reinstalled FS 2004. And tryed to Reload 737NG w/ V.9 update, and uninstalled useing the Uninstall Tool. Reloaded the Sim without the V.9 Update, Rebooting between each install. I tryed to find the GDI+ file to download but could not find it at MS.. Next I would like to try Deleteing the CFG file (is this recomended) another question where is It, could you give me the link where I can find it I seem to have lost it. Thank You for listening..

Sirs: I downloaded the sp1c (8900) update to the Base Pack, and the 6700 installed prefectly. Thank You for showing that to me.

Sirs: Could you explane an updated version. I'm installing from an External Drive (Backup) of my original Download. The PMDG 8900 Base Package works fine. I have a "Extended Download Service" (All Packages). from PMDG.... I could try that ??? Again Thank you for the Reply...

Sirs: I have a small problem with an installation message, It's something that's been bothering me for quite sometime. I purchased this product about a year ago, from Download. It basically has been running stable, a good program. When I re-installed it recently I got a message "PMDG 737NGX Version 1.00.3057 or later requuired before you may install this addon. Please patch your NGX before installing this product.".... I have the 737-8900 Base Package installed. What can I do to get by this problem. Thank You Sirs...

Sirs: FlexNet Services ?? Could you explain, I'm still locked out. And I insert the Activation Key and nothing. I will try asking Help and Support about FlexNet Service. Thank you !!!

Sirs: I seem to be getting a Error Message w/ the NGX 737 It involves the Activation. It seems to be locking me out. It reads ERROR: flxAct Comon Repair Local Trusted Storage 50044,71013,1.... I insert my Activation Key # and it still doe's not let me in. I have had this program for allmost a year and it never asked me for the Activation Key. I purchased it from Download from PMDG. Is this a wrapper problem (w/ PMDG) or can you figure out what's going wrong... Thank you Sirs..

Sirs: Problem solved, by deleteing the Texture files (Manually) left over from a previous install. The new liverys installed prefectly. Thank You for the re-ply and information.

Sir: Do you mean Uninstall everything (Liverys, Update [sP],and NGX 600-900wl) And start over from the Installer. Or just reinstall the Liverys ?? Another question are their two SP (Updates) one for 600-700wl and one for 800-900wl or is their just one. Thank You for the Re-Ply...

Sirs: I'm having what I think is a Simple problem. When useing the Livery Manager I get a Windowed Message saying "Texture folder already Exists" and "Please enter a new texture folder below" ... This only happens w/ the 800wl, 900,and the 900wl (It loads the 600-700wl's). Has anyone ever experienced this problem and what should I do with it. Thank You..........

Sirs, Problem solved, Goofball me I forgot to uninstall the Liverys before downloading the software (PMDG NGX 600/700).Sorry for the confusion. Thank You.........

Sirs: I have a problem, what I think is a CTD. The program refuses to run past Free Flight. I get the following error messages "A Fatal Error has Occurred" "MS FSX has stoped working" Then the Program re-starts. I recently installed PMDG-NGX 737 800/900 Base Pack . And the Update ( As instructed in the Forum). Less than 3 hours ago I downloaded the PMDG 737 600/700 w/ succesfull Activation. And the Program refuses to load. Should I disassemble it all and then install the Update ??? (Like the forum instructs) "I need a litle info on the order to assemble these 2 programs and the Update" Thank You Very much.........