spil

Well it seems like the problem is isolated now.
It only happens when using the PMDG B747 v3.
Now I have made two short flights with PMDG B738 NGX without any problems at all!
And that with maximum graphics settings and everything works great!

Just wanted to let you know.

Yeah I understand that. But why does this only happen in Windows 10 and not in Windows 7 Ultimate?

That is the problem I try to find an answer for.
Removing the FSX.cfg causes more problems. Done that before without a solution.
If I ever find a solution I will post it I promize.

Hi.

Well I have tried to set the graphics to lowest possible, it still crashes.
And why should graphics be a problem in Windows 10 when it worked flawless in Windows 7 Ultimate?
This must be some strange Windows 10 symptom.

Already tried all fixes in that guide I see.
At least from page 32 and onward.

Strange that my problem only occurrs in Windows 10 and not the better Windows 7 Ultimate. But if I go back the security updates will not last too long for Windows 7 Ultimate I guess so then I am back at square one again when 7 Ultimate unfortuantely dies forever.
Thank you so far for your support. But this does nots olve my problem so far.

Hi everyone

So now I have tried everything everyone suggest so far. Nothing in Windows 10 works for me.
I can perform a flight without problem but on approach or when taxi in to terminal FSX shuts down and I end up on desctop. I do not know what abbreviation you have for that, please speak in clear language when suggesting anything.
My system is an Intel i7 at 2.9 MHz, 16 Gb RAM, 2 GB video ram.
Software used is FSX, PMDG 747 v3, Active sky 2016, FDC 2011.

All this works great without any problems in Windows 7 Ultimate but after the update to windows 10 I only get problem after problem after problem.
Must be a very bad version to use FSX in I guess. Windows 10 seems to give you alot of problems not just this.

However here is the last fault report from Windows why it crashed FSX,
___________________

Beskrivning
Felaktig programsökväg:    C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe

Problemsignatur
Händelsenamn:    BEX
Programnamn:    fsx.exe
Programversion:    10.0.61472.0
Programtidsstämpel:    475e17d3
Namn på felmodul:    StackHash_3e9b
Modulens version:    0.0.0.0
Tidsstämpel för felmodul:    00000000
Undantagsförskjutning:    PCH_03_FROM_KERNELBASE+0x0017A34D
Undantagskod:    c0000005
Undantagsdata:    00000008
OS-version:    10.0.15063.2.0.0.256.48
Språkvariant-ID:    1053
Ytterligare information 1:    3e9b
Ytterligare information 2:    3e9b7846e3f8a4b53b4c50c361d8800c
Ytterligare information 3:    3964
Ytterligare information 4:    39646e251788ff593c704374e146a395

Extra information om problemet
Bucket-ID:    7acbf2120991f253fa0cb591148a98f4 (116459335635)
___________________
Does anyone know what this means?
And how to fix it?

Best regards

Well I just checked the settings for my graphics card.
It says I have 2 GB dedicated video RAM
Available graphics memory 10219 MB
System video memory 0 MB

Something wrong here maybe?

My Graphics card is in the PCI-E x16 slot but in the BIOS it says that the default video is in the x1 slot. Does that matter?

Yes, and if system manage it the size is always 0 and even more crashes in Windows 10

It seems to work fine so far.

However there is sometimes, depending on the mood of the computer it seems, problems with the graphics.
Sometimes everything loads fine, but other times, as soon as I turn my head to look around the walls of the cockpit is missing etc.
Is this depending only on the graphics card limits or computer?

I mean I have a pretty decent computer,
Intel i7, 2.93 GHz
16 GB RAM
2 GB video RAM, AMD Radeon HD7700

It should be able to have more complex graphics, shouldn't it?
Never had these problem on my Windows 7 only in the f.....g Windows 10.

Windows 10 must be the worst word not allowed microsoft ever has invented.
Anyone more experiencing much more problems in Win 10 than in Win 7?

Good day!

Well the problem was very simple to solve.
I missed some settings after my Windows 10 upgrade.
Go to Control panel, System and Advanced system settings, the tab Advanced and change the virtual memory.

Once I set it to lowest 100000 and larges 200000 everything works great at maximum resolution in graphics.
No crash and very smooth flight.
Will be nice to try longer flights and see how things are going.

Hope this maybe can help some users that have upgraded from Windows 7 to 10. When done, the advanced memory settings are set to basic levels by Windows default.

This is my new problem with CTD FSX;

Beskrivning
Felaktig programsökväg:    C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe

Problemsignatur
Händelsenamn:    BEX
Programnamn:    fsx.exe
Programversion:    10.0.61472.0
Programtidsstämpel:    475e17d3
Namn på felmodul:    StackHash_a541
Modulens version:    0.0.0.0
Tidsstämpel för felmodul:    00000000
Undantagsförskjutning:    PCH_03_FROM_KERNELBASE+0x0017A34D
Undantagskod:    c0000005
Undantagsdata:    00000008
OS-version:    10.0.15063.2.0.0.256.48
Språkvariant-ID:    1053
Ytterligare information 1:    a541
Ytterligare information 2:    a5414894431e1efdd791f8a9bbe3a71e
Ytterligare information 3:    0756
Ytterligare information 4:    075677876dfd0d386f618893b41a1566

Extra information om problemet
Bucket-ID:    ad62a30116df636d04b469ea5951c705 (116461859268)

I have a lot of stackhash problem and CTD in FSX.

Do not have MyTraffic installed and it worked very fine under Windows 7 Ultimate, no crashes at all, but in Windows 10 FSX just keeps crashing all the time with different errors all the time.
I just hate Windows 10.

Good day everyone,

Well my crashes continues now a new one, see below.

My computer is a i7 3,8GHz, 16GB RAM, 2GB video RAM, Windows 10

The crash report says like this;

Beskrivning
Felaktig programsökväg:    C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe

Problemsignatur
Händelsenamn:    BEX
Programnamn:    fsx.exe
Programversion:    10.0.61472.0
Programtidsstämpel:    475e17d3
Namn på felmodul:    StackHash_3e9b
Modulens version:    0.0.0.0
Tidsstämpel för felmodul:    00000000
Undantagsförskjutning:    PCH_03_FROM_KERNELBASE+0x0017A34D
Undantagskod:    c0000005
Undantagsdata:    00000008
OS-version:    10.0.15063.2.0.0.256.48
Språkvariant-ID:    1053
Ytterligare information 1:    3e9b
Ytterligare information 2:    3e9b7846e3f8a4b53b4c50c361d8800c
Ytterligare information 3:    3964
Ytterligare information 4:    39646e251788ff593c704374e146a395

Extra information om problemet
Bucket-ID:    7acbf2120991f253fa0cb591148a98f4 (116459335635)

-------------

Addon sceneries I have is the ORBx, PMDG 747 v3 and 737NGX.
Made a test flight tonight and on apporach to EKCH this happened.
Getting real tired of all crashes I get. Anyone has any idea why this happens?

Problem solved.

The Microsoft Visual C++ 2008 SP1 Redistributable Package had to be repaired which can be done on Microsoft site very easy.
After that was done to more crashes and everythings works very smooth.
Obviously my problem was caused by this. Wanted to let you know about this in case anyone more has the same problem as I have had.
 

Will do, thank you anyway for your support!

Hope this helps you to see more why it crashes

Now I have tested the FSX again and got a crashdump as below.
Do you need a translation of it?

Beskrivning
Felaktig programsökväg:    C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe

Problemsignatur
Händelsenamn:    BEX
Programnamn:    fsx.exe
Programversion:    10.0.61472.0
Programtidsstämpel:    475e17d3
Namn på felmodul:    MSVCR80.dll
Modulens version:    8.0.50727.9307
Tidsstämpel för felmodul:    589acae6
Undantagsförskjutning:    00008aa0
Undantagskod:    c000000d
Undantagsdata:    00000000
OS-version:    10.0.15063.2.0.0.256.48
Språkvariant-ID:    1053
Ytterligare information 1:    ae45
Ytterligare information 2:    ae45cba6fe2778870f8c404fa9d68442
Ytterligare information 3:    07b7
Ytterligare information 4:    07b739a0b136dc66408a8e135d23b4ba

Extra information om problemet
Bucket-ID:    74712cf616796d3f26e50ebf7194d38f (116362220855)

There is no such problem reported when I look at the crash reports

Still no solution for this problem?
My 747 v3 in FSX has never worked in Windows 10.

Well I know about that, and I have uninstalled the KB4038788 and still have the same problem. So it does not seem to be the same problem, sorry to say.

Good day all users

Does anybody know why FSX keeps crashing when trying to fly the B747 queen of the skies v3?

It works great to fly the 737NGX but as soon as I want to fly the 747 FSX crashes.
My system is:
Intel i7 processor
16GB Ram
2 GB video ram
Windows 10 Pro (updated from Windows 7)

Looking forward to get this problem solved.

Good day everyone!

Again I am having major problems using two monitors with FSX.
When I start FSX everythinbg works great on the master display and the new view I want shows up on the master display. When I click "Undock window" and drag it across to monitor two, no problem as long as I do not change the size of it or put it in full screen mode. Then everything just turns black.

Have tried SO much now but nothing helps me.
Direct X10 preview only makes some scenery to show up as triangles and that is no option.

My system is:
Windows 7 ultimate
16 GB RAM
2 GB video card
FSX with NGX from PMDG and various add ons such as ORBX and My Traffic

Display sizes are checked, master has 1280 x 1080 and secondary display has 1280 x 1024.
"Windowed" mode is no option since this worked fine with my other hard drive. Now I needed to setup everything again due to computer crash. But that has nothing to do with my problem and FSX.
I have been able to run it in full screen mode without any problems before. It was great!!

However now the secondary screen just turns black and if I maximize windows pressing ALTGR + Enter both screens turn black.

Can it have something to do with scenery complexity or other setup in FSX ?
Have tried very much settings for the past weeks now without getting it back to what it was before my crash.

By the way YES I do have a completely new HDD and cloned the software so forget that. That is NOT the problem.

Thank you in advance for any help!!

Hi DavideLeeSim You shouldn't play with the falps at that speed so why force it to brake down? They are very expensive to exchange and there is a natural lock mode so it is impossible to set flap 25 at speeds above 250 knots, use the speedbrake to bring the speed down, then everything works fine, just as in real life. Sure you can set the handle to 25 degree flap, but it will not extend to that position in real life if you have too high speed. In case the flaps are set correctly in lower speeds the flaps retracts automatically to maximum setting, but the handle will not move, you will just see it on the flap position indicator.

Just want to tell PMDG, they have done a great job with this flight simulator for FSX, thank you for the effort of putting this together!!I am a B738 pilot in real life and tonight I tried out this simulation on a medium distance flight between ESSA and LEPA (Stockholm/Arlanda and Palma) using the Norwegian livery.Used the Virtual Cockpit view all the time and almost everything is there to find as in real flightdeck. You that have built this simulator and that are flying the aircraft know whats missing. But that is small details and no big deals.Simulated an engine flameout, everything responded as expected, as well as electrical malfunction and resetting while in flight. You have done a real good job programming this one!!Keep up the good work PMDG!!

Well if you can, try multimonitor, it is perfect to have the overhead panel, FMC and center stack there including the communication box if you use ATC. Then it gets as real as is possible. Thank you very much for your replies!

Thank you, will try that later and let you know. But when I use that eyepoint change it is impossible to look through any other window....hmmm, thank God for real aircrafts :)No throttle panel, is there any way to shut down the engines after landing and how to ARM spoilers?? BTW I use this 738NGX simulator together with Live cockpit so Ctrl+SPACE means stepping through the checklist, changed some keyboard assignments due to that.

Forgot to let you know I ment the 2D view.