spil

Problem solved. Restart of system twice and the problem is history. Strange....

Problem solved, it was an automated update of an airport scenery that caused the CTD. When replacing the airport scenery to an older version and disabling auto update everything works normal again! Topic can be closed. Have a wonderful day!

Hi Recently a computer update that everyone is forced to do (Win10) the sound of voxatc is very low. But as soon as I go into a menu in P3D the sound level goes up to normal again, but when closing the menu in P3D the sound falls down again. Why is this happening?

Thank you for the information. It talks alot about old simulators but okay will take a look in it if I can find anything that can be helpful if I find the guide....

Hello forum! Recently I had a large Windows 10 update and when I started my full size flight simulator everything works fine until I load my default scenario or go to default airport with whatever aircraft, it crashes to desktop without saying anything. This has not happened before. Have P3d v4.5 with the hotfix installed as well. Some of you say I should watch the event viewer, but I cannot find any useful information about P3D crash it that place. Recently there was an update in the Active Sky as well, but it doesn't matter if I run AS or not, it crashes to desktop anyway. Read about a few users having the CTD caused by AS but if I do not start AS my P3D still CTD as soon as I load my default scenario or go to any airport. I have been flying severeal hundred of hours with my simulator before this happened and I have not changed or added any scenery or similar. The only thing that has been done is the Win10 upgrade (that everyone is forced to do) and the AS update. Anyone having any suggestion where to look for a log or similar? Anyone having the same problem? The computer has not been turned on for a while so my Win10 upgrade was a bit late I guess since I fly with my simulator mostly during winter. Looking forward to any suggestions that will make me fly again.

:) true. Since I like computer programming I would like to know what caused the problem, but so far I have not found it, maybe some update or something like that. It just happened from one flight to another, strange, very strange. But now I know, thanks to you, what I need to look for if it happpens again. Once again, thank you!

Will take a look into that file and see. When I began using VOXATC I have a memory that you could set this in one of the files that comes with VOXATC, but it is not there anymore. Maybe my very good memory has wrong but I am almost sure there is a part somewhere, very well hidden where this could be set. It should be a part of the stanard VOXATC setup software but that only contains minimum amount of variables to set. Thank you in advance for your suggestion, will head down to my simulator and dig into this problem 🙂 UPDATE: This correction worked fine. Thank you very much! Checked the file and mbars was set to false in two places in the file, when changing to true everything works fine again.

Hi. Recently when I am flying in Asia the VOXATC only gives me mmhg instead of hpa and transition level/height is not corrct even if the simulator, P3Dv4 is correct setup. As I recall there is a setting somewhere in VOAXATC but I have not found it agian. Why is this happening? Am using PMDG 738 as Aircraft and it is correct setup.

Hi. I am looking for a visual solution for my flight simulator. Half of the 180 degree screen is completed and currently I have a projector for right out view only and it is placed inside the flight deck next to the pedestal just to give me a view to that side. Have tried three different projectors none of them are good. Take a look at my site where I have my project boeingflightsim.wordpress.com. Anyone have any idea that does not cost too much? Led curtain maybe?

Hi, Found out what the problem was yesterday. In P3D on Options -> Graphics -> Traffic, I had to set AI traffic to about 45% and in VOXATC leave it on 75% as I had, then all airplanes showed up on the apron and in the air. But when I only had 75% traffic in VOXATC and 0% in P3D no traffic at all, only static on airports, were present. Very strange, But now it works! Also I have disabled the Enroute traffic instruction and no more re-routing by ATC. I also have the EditVoicePack XL present in my simulator to hear more real airlines and not only the default by P3D and VOXATC. Altogether this combination is great! My project has a small blog where I talk about my home flight simulator if you would like to take a look, https://boeingflightsim.wordpress.com/ Reason I think why I got it wrong was that I have been working real hard to get some other things solved and I wanted to have the airport to myself without AI traffic, so I disabled it myself and just forgot about it after a day or so intense work with another panel :) Then I just got hooked up on the problem with the deviation from the ATC...well when you work intense enough on some projects you tend to forget some minor things. Thank you for the Enroute traffic instructions tip. Maybe should talke more to you guys here to not get too blind sometimes.

Well I disabled the Enroute traffic instruction and all of a sudden there was no communication from ATC to other aircrafts, just my aircraft. There were no aircraft in air so that was a bit strange. So far I have just had the time to fly one route that lasted 1,5 hour, and simply no other traffic was around at all. What traffic density do you use? I am using about 70% in VOXATC setting. And that together with Global Traffic.

Thank you for your replies. Tried it and it worked but oh lord how sad that AI traffic was gone. Will try to disable and enable the VOXATC if it happens again to see if that helps. There must be an update for this problem soon I hope. AI traffic should always be in the simulator.

Hi I have been using Voxatc for a while now with P3D v4.3 and my PMDG 737-800, no problems at all. But all of a sudden, without any aircrafts around me I get a call from the ATC to change my heading, usually to 180° opposite heading that my route is due to traffic alert on the same flight level. But still, there is no traffic there and it keeps telling me to turn to a new heading. A few times I follow the instruction and that gives me about 40 minut delay and nothing realistic with this task. It hapens in every single flight now!! If I do ignore the instructions it keeps telling me to change my heading but after a while it says "clear of conflict continue direct ...". But why does this come up in every single flight all of a sudden, and without any aircraft in the way of my flight route? Anyone having a solution for this problem? /Seb

What is the reason for presenting full name in front of everyone here? If you should have a more serious customer support, you will reply to each and everyone alone by e-mail or similar, not publish everything here. Why don´t you have a real customer support instead of this forum? So the problem remains only with B747 ver 3. That gives me OUT OF MEMORY on approaches all the time. That never happened in Windows 7 Ultimate or does never happen with Boeing 737-800. The graphics settings are at the LOWEST possible and it still happens. Everything is set to the lowest possible and still ONLY PMDG Boeing 747 ver3 crashes every single time. I don´t know what you suggest next, but I will not spend more money to upgrade my computer a tiny bit more since it has NO PROBLEMS with anything else. Is the B747 ver 3 really made for FSX? I doubt it since this keeps happening. I still get the EXACT same problem as from first time. Beskrivning Felaktig programsökväg: C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\fsx.exe Problemsignatur Händelsenamn: BEX Programnamn: fsx.exe Programversion: 10.0.61472.0 Programtidsstämpel: 475e17d3 Namn på felmodul: StackHash_3e9b Modulens version: 0.0.0.0 Tidsstämpel för felmodul: 00000000 Undantagsförskjutning: PCH_03_FROM_KERNELBASE+0x00179F7D Undantagskod: c0000005 Undantagsdata: 00000008 OS-version: 10.0.15063.2.0.0.256.48 Språkvariant-ID: 1053 Ytterligare information 1: 3e9b Ytterligare information 2: 3e9b7846e3f8a4b53b4c50c361d8800c Ytterligare information 3: 62a3 Ytterligare information 4: 62a347caf62480433d89cc45656f7434 So this cannot depend on the computer anymore. There must be some kind of software malfunction here. Either Windows 10 that is word not allowed from the start or PMDG B747 ver 3 software that is not configured to be used with Windows 10 and FSX. Do you have an answer why the PMDG ver3 worked GREAT in Windows 7 Ultimate, with the exact same computer BUT with a 2 GB video card. And now with a 6x better video card it just keeps crashing. This must mean PMDG B 747 ver 3 is NOT made for Windows 10, right?

Hej. Det verkar som det inte finns någon möjlighet, eller att skrota Windows 10, det är ju ett oseriöst operativsystem. Det märkliga är att FSX fungerade utmärkt i Windows 7 med god prestanda. Allt det här började med Windows 10 enbart. Har testat det absolut lägsta inställningarna trots bra prestanda på datorn i sig, men FSX lever sitt egna lilla liv. Lite trist lägga ned så mycket pengar på chansningar med P3D med tanke på att jag använt Windows 7 med tämligen avancerade moduler. Är helt ointresserad av spelläge i FSX, jag använder det enbart för övning av verkliga scenarios. Jag har ATPL, MCC, MPL, IFR och type rating på B748