Dtrain

So just today again, i used the B-25 and everything is great until i finish the flight , taxi to the gates, park.. exit FSX to splash page.. and when i try to get into log book (to write down my hours then delete it) it gives me the error of out of memory, and i have to restart .... what i will try tomorrow is to fly it in windowed mode instead of full screen, and see what happens, i do have a multimonitor set up, and my specs are 2x680 gtx's, rampage MB, 16 g ram, 1250 watt ps, I7 3930 chipset and a tonne of addons.. and again this only started happening after i installed the b-25...

Great info, thanks Stans, i use the spread sheet as well.. but i have to get the info from the log, then i delete it... I do have alot of addons, But this only started happening since i added the B-25, flies well.. but soon as i shut down the flight . ie. when i'm parked after the taxi, then it OOM's...

i'm the same. CTD out of memory after i finish the flight and try to log the hours??

Everyone, Please delete the ini file in the FSUIPC. this will fix your problem DROVER

no the trim wheel does not work fine with the ngs, or 777... you have to use the trim tab on your yoke... now what happens in the 777 it goes full nose down and cause bouncing/rocking in mid flight in autopilot.. so what you have to do is go to the VC put your cursor on the trim tab, next to the spiloer handle, and bring it back to the middle/neutral postion.. don't use the Cessna trim wheel for the big birds hope this helped Drover

Hi... I had the very same problem... I have a Cessna trim wheel...when I would trim the plane.. the actual trim tab next to the spoiler handle would automatically go 100% forward/nose down.. so if you have the Cessna trim wheel.. don't use it.. just use the trim on your yoke... and to prevent it from going nose done.. put your cursor on the trim tab in the VC and bring it back to the middle/neutral.... 100% worked for me DRover

Hey guys, this is what I figured out... so when you start configuring the 777 on the ground, (and if you have a Cessna trim wheel by Saitek, you roll it down to configure the trim.. and the actual trim control on the plane to the left of the spoiler handle will automatically go full nose down.. you'll hear it go, TAP.. all the way forward... so what I've done was put my cursor over the trim handle of the plane and center it back ... and it all works fine...) Make sure the trim handle itself on the console is centered.. not all the way forward.. not all the way back.. I just tried it my self.. and NO MORE ROCKING.. YAY... happy flying DRover

Hey guys, this is what I figured out... so when you start configuring the 777 on the ground, (and if you have a Cessna trim wheel by Saitek, you roll it down to configure the trim.. and the actual trim control on the plane to the left of the spoiler handle will automatically go full nose down.. you'll hear it go, TAP.. all the way forward... so what I've done was put my cursor over the trim handle of the plane and center it back ... and it all works fine...) Make sure the trim handle itself on the console is centered.. not all the way forward.. not all the way back.. I just tried it my self.. and NO MORE ROCKING.. YAY... happy flying DRover

YES, I have the same problem.. trouble shooting as we speak

Yes Gents, I have the same issue.. fine on the takeoff.. climb and when it levels out at my top altitude, then the rocking begins... on the decent its fine as well.. my trim is not working well either, it defaults at .12 all the way nose down.. when autopilot is turned off.. then watch out.. 6000 fpm PLUS ... nose down... hope we can get a fix... Either way.. still a beauty plane.. way to go PMDG.. Drover

I also have an issue with AE/AE , i'm using mytrafficx 5.4 pro, and can't seem to get the "roar" of the engines. I experienced exactly what Mike said in his post. i will not give up on Flight 1, great products just have to tweak it up just like we tweak FSX... Drover