rallye

Hello, I am flying the milviz 737 manually, but I have a problem when I try to use the ILS. I first select the frequency 110.10 in the NAV radio, then I click on NAV1 switch just below. After a while I can hear the morse code in the cockpit. I then select the course 89 ° in the HSI, when I approach the airport, i capture the glideslope, which is displayed correctly in the artifical horizon (ADI), but I can not get the localizer, the red flag remains on all the time. Any idea, comment are welcome, Thank you for reading, Looking forward to read you, Rallye

Hello John, Thank you for taking the time to reply, I did not except anymore after 2 weeks. Very glad anyway. I have read that you first start P3D then FreeTrack, it did not work for me. I have to start FreeTrack first then FSX or P3D or FreeTrack freeze. The same happen with OpenTrack, which works sometimes better than FreeTrack (filters and source codes available). If you can spend more, could you please provide me your simconnect.cfg & .xml and screenshots of freetrack or the .ini file to compare with mines. I do not have the SDK installed, but I do not think this could be the solution. I do not have it either in FSX. If you have more time, please have a look at my own files, they work with fSX but not with P3D (same for opentrack), but as I wrote before I have to start freetrack (or opentrack) first. Any idea or comment are welcome. Thank you for your time, Looking forward to read you, Rallye

Hello Everyone, I trying to use FreeTrack V2.2 lastest version with Prepar3d V2, without success so far. I have "log" P3D simconnect, which shows no connection : _________________________________________________________ 0.00000 SimConnect version 2.0.0.0 0.04641 Server: Scope=local, Protocol=IPv4, Address=127.0.0.1, Port=60500, MaxClients=256 0.07365 Server: Scope=local, Protocol=Pipe, Name=\\.\pipe\Lockheed Martin Prepar3D v2\SimConnect, MaxClients=64 0.09884 Server: Scope=local, Protocol=Pipe, Name=\\.\pipe\Microsoft Flight Simulator\SimConnect, MaxClients=64 0.12397 Server: Scope=local, Protocol=Pipe, Name=\\.\pipe\Microsoft ESP\SimConnect, MaxClients=64 0.15788 Server: Scope=local, Protocol=Pipe, Name=\\.\pipe\Lockheed Martin® Prepar3D™\SimConnect, MaxClients=64 0.19010 Server: Scope=local, Protocol=Pipe, Name=\\.\pipe\Lockheed Martin Prepar3D v2\SimConnect, MaxClients=64 0.22349 Server: Scope=local, Protocol=IPv6, Address=::1, Port=10596, MaxClients=64 0.25513 Server: Scope=local, Protocol=IPv4, Address=127.0.0.1, Port=10597, MaxClients=64 _________________________________________________________ Here is a simconnect log of working FSX with FreeTrack _________________________________________________________ 0.00000 SimConnect version 10.0.61259.0 0.02441 Server: Scope=local, Protocol=IPv4, Address=127.0.0.1, Port=60500, MaxClients=256 0.05035 Server: Scope=local, Protocol=Pipe, Name=\\.\pipe\Microsoft Flight Simulator\SimConnect, MaxClients=64 0.06509 Server: Scope=local, Protocol=IPv6, Address=::1, Port=11431, MaxClients=64 0.07523 Server: Scope=local, Protocol=IPv4, Address=127.0.0.1, Port=11432, MaxClients=64 0.15271 Exe Launched: Path="C:\Program Files (x86)\AICarriers\aicarriers.exe" CommandLine="-nogui" Version="<Unknown>" _________________________________________________________ > 33.09625 [383, 1]Open: Version=0x00000002 Name="Set Data" > 33.09635 [383, 2]CameraSetRelative6DOF:fDeltaX=0.027193, fDeltaY=-0.005697, fDeltaZ=-0.728215, fPitchDeg=63.536755, fBankDeg=0.050098, fHeadingDeg=-65.701195 > 33.09639 [383, 3]CameraSetRelative6DOF:fDeltaX=0.027193, fDeltaY=-0.005697, fDeltaZ=-0.728215, fPitchDeg=63.536755, fBankDeg=0.050098, fHeadingDeg=-65.701195 > 33.09642 [383, 4]CameraSetRelative6DOF:fDeltaX=0.027193, fDeltaY=-0.005697, fDeltaZ=-0.728215, fPitchDeg=63.536755, fBankDeg=0.050098, fHeadingDeg=-65.701195 > 33.09644 [383, 5]CameraSetRelative6DOF:fDeltaX=0.027193, fDeltaY=-0.005697, fDeltaZ=-0.728215, fPitchDeg=63.536755, fBankDeg=0.050098, fHeadingDeg=-65.701195 > 33.09646 [383, 6]CameraSetRelative6DOF:fDeltaX=0.027193, fDeltaY=-0.005697, fDeltaZ=-0.728215, fPitchDeg=63.536755, fBankDeg=0.050098, fHeadingDeg=-65.701195 > 33.09649 [383, 7]CameraSetRelative6DOF:fDeltaX=0.027193, fDeltaY=-0.005697, fDeltaZ=-0.728215, fPitchDeg=63.536755, fBankDeg=0.050098, fHeadingDeg=-65.701195 > 33.09651 [383, 8]CameraSetRelative6DOF:fDeltaX=0.027193, fDeltaY=-0.005697, fDeltaZ=-0.728215, fPitchDeg=63.536755, fBankDeg=0.050098, fHeadingDeg=-65.701195 > 33.09654 [383, 9]CameraSetRelative6DOF:fDeltaX=0.027193, fDeltaY=-0.005697, fDeltaZ=-0.728215, fPitchDeg=63.536755, fBankDeg=0.050098, fHeadingDeg=-65.701195 > 33.09656 [383, 10]CameraSetRelative6DOF:fDeltaX=0.027193, fDeltaY=-0.005697, fDeltaZ=-0.728215, fPitchDeg=63.536755, fBankDeg=0.050098, fHeadingDeg=-65.701195 _________________________________________________________ For that I have used a simconnect.ini _________________________________________________________ [simConnect] level=Verbose console=Yes file=C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\SimConnect%01u.Log file_max_index=9 _________________________________________________________ I have the same simconnect.xml in both FSX and P3D _________________________________________________________ ?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="SimConnect" version="1,0"> <Descr>SimConnect</Descr> <Filename>SimConnect.xml</Filename> <Disabled>False</Disabled> <SimConnect.Comm> <Disabled>False</Disabled> <Protocol>IPv4</Protocol> <Scope>local</Scope> <Address>127.0.0.1</Address> <MaxClients>256</MaxClients> <Port>60500</Port> <MaxRecvSize>4096</MaxRecvSize> <DisableNagle>False</DisableNagle> </SimConnect.Comm> </SimBase.Document> _________________________________________________________ I use this simconnect.cfg for FreeTrack : _________________________________________________________ [simConnect.0] Protocol=IPv4 Address=127.0.0.1 Port=60500 MaxReceiveSize=4096 DisableNagle=0 _________________________________________________________ Any idea or comment are welcome. Thank you for your time, Looking forward to read you, Rallye

Hello, Many thanks tom79, the trick is working very well. I can now leave FSX running all the time. When I will have more time, I may investigate more on this scenery problem. It seems that the scenery is loaded even, if it is disabled in FSX. I have read some body writting this as well on web. Any way thank you so much, Rallye

Hello again, I have disable preloading, FSX turn more than an hour. I suppose it is related to the addon scenery. I will post more later. Thank you tom79 very much for the idea. Rallye

Hello FireHawk44, Thank you for your reply, the highmemfix=1 is included in fsx.cfg. In the process monitor reports, you can see the increase in virtual size and private bytes. When virtual size rise above around 1024 MB, the problem occurs. I think that most of your tweaks procude an OOM in real flying, whereas my problem only happen before that in free flight selection. Sorry I'm running out of time now. Thank you again, Best regards, Rallye

Hello, I have a memory leak problem with FSX, which is causing a "out of memory" (OOM) in free flight selection and so far only in free flight selection. It never happened in a normal fligh. So I cannot leave FSX free flight selection open in background, FSX will crash. Few time before FSX crash, textures disapear from the current aircraft. The memory leak can be seen in process explorer in private bytes and virtual size, it about two minutes the problem occurs. Before : After : The following things has been tested without sucess : 1) fsx.cfg deleted then FSX launch (fsx.cfg renewed) without .dll or .gau validation, the problem always occurs with test aircraft Dino Cattaneo T45 2) all addon scenery unselection afte point 1, same result 3) I have used DebugDiagx64 to trace the problem up to api.dll with increase of 400 MB in the heap 4) I have replace my AMD video driver with 12.4, 12.10, 13.4 and 13.8 beta2, same result 5) I have tried the patched new api.dll found in http://forum.avsim.net/topic/389704-fsx … -patcher/ the error does not happen but the memory leak remains with the textures which dispear and no flight can be launch for FSX fre flight. Could you please help, Config : Asus G73J avec Radeon mobility HD5870, Windows 7 64bits, FSX with acceleration Thank for your help, Rallye

Hello,I have solved the problem by upgrading my ATI/AMD drivers from 11.8 to 11.11.Thank you for help,Rallye

Thank cianpars for your reply, I will try that this evening et let you know.Rallye

Hello,I have a problem with my FSX since some times. I have a scramble view and four black bars which appears in the preview windows of free flight after the first free flight has been done (before the first flight : non problem). No way the find a solution so far, even with a lot of googling. Operating System is Windows 7 / 64 bits. FSX has acceleration pack. After an OS hibernation the problem is solved for the first flight again. After that the scramble appears again and again.A screen shot is attached :Any ideas are welcome, thank you for your helpRallye