LionAir

Hi ScottFlieger, I have tried this but the (single/middle) lever jumps from idle direct to A/THR without smooth in between in Airbus configurator - chosen 1 I have assign it at the Axis assignment tab calibrate it on the joystick calibration tab as you described Further more, is it not strange that you can choose in the Airbus configurator for 2 engines, when it does not work?? Hope you have still more ideas/solution to try for me... thanks

Hi ScottFlieger I have tried that but afterwards my throttles are not moving anymore att all.... I use throttle 1 and 2. I have set the throttle axis count also set to two in the Airbus Configuration.. Any idea.....??

Hello, I am there again, I have set up my thrustlevers with FSUIPC and everything works (nearly) When I move the levers for the first couple of mm the thrust is immediatly rising to 60%. Very annoying when you will to taxi and drive for abt 40/50 km on the taxiway :-) Is there a way to finetune the levers so that I can move the levers smoothly.....

Ok ScottFlieger, Many thanks for your patient en support untill now. Everything works so far. The next step is the VRInsight FCU combo. (I am searching for one at a reasonable price. Maybe second hand/used)

I did not know that the FSXsync and Aircraft must highligthed in orange, sorry for that. Has LINDA always has te be running?

Hi there, I have installed Linda in my P3d modules folder. So far so good, and have tried to install/configure some buttons, but it does not work: Logitech Joystick Attack 3: Button 3: Autopilot APPR on (Aerosoft Airbus) Button 8+9: Autopilot AP1 on, Autopilot AP1 off, (Aerosoft Airbus) Saitek Pro flight Quadrant: Button 1/4: Engine1 Master on/off, Engine2 Master on/off, (Aerosoft Airbus) Button 5: Ignition Start (Aerosoft Airbus), Button 6: Parking Brakes (FSX) I ask you do you know what is going wrong? (BTW - Throttles configured by FSUIPC is working very well in the meantime, thanks for that)

Yes, I have the fully licensed version. What I mean is, do you not have to calibrate the throttle (joystick calibration tab - on page 3 of 11 in FSUIPC) the axis after assigning these. I asked this because I had to this with my Ifly 737 in my formal Simulator Sorry for misunderstanding, but english is not my native language..

Thanks, Do you not have to calibrate (on page 3 of 11) on the calibration tab the thrust lever(s) in FSUIPC after Axis Assigments?? And by assigning the axis, ( throttle, spoiler, flaps) do I need by every lever another tab, ( 1, 2, 3) or do I get always the first (1, 1, 1) I have used FSUIPC for years by my Boeing Ifly 737 in FS2004 without any problems, but by this Airbus I can not get it work. Maybe is Prepar3D the "dark horse". But many thanks, I will try this tonight und report back.

Hi Scotflieger, I have tried something as your described, but for sure I do not know what you mean conc installing/setup the Saitek Throttle Quadrant through FSUIPC Plse explain me (step by step) what you have done to make these work with the AS Airbus(es) Many many thanks for your help....

Hi Scottflieger, Thanks, but the setup for the throttle lever / spoiler I do not understand. Can you Repeat this step by step? The reverse trust I have done through FSUIPC but the throttle are not work out for me. Thanks

Goodday Scotflieger, Thanks for your reply. I am going to search the web to see if I can found a video where I can see how it's work. (I have seen yours already on Youtube but that's more for setup) I read that you have also the Saitek Throttle Quadrant. I have one too and I am struggling since two months (as long I own the Buses) to get it work. I have searched the web and I have seen many solutions to get this work but with me, no succes. I have tried to follow the setup guide from Aerosoft but with no luck untill now. Maybe you can give your setup then I give it another try. (Maybe by PM because this not the right forum I assume) (Untill now I use the Logitech Attack 3 for thrust but I would like to use my Saitek) Many thanks in advance if you have tips....... My config: Prepar3D v 2.4 FTX, Global, Vectors, LC-Europe AS - Airbus 318/319/320/321 OPUS weather Pro ATC X FSCommander GSX and several Airports add-on's

Hello there, I am thinking about purchasing a VRInsight FCU Combo panel for using with the Aerosoft Airbuses. (318/319/320/321) Now I am asking how do you have assign (layout) all the buttons on the panel to work at best with the Airbuses. Maybe you can post a picture of your layout (s)? Would be great for me to know in advance Many thanks in advance. (BTW - using the FCU Combo + Linda together with Prepar3D will not give any problems??) Have a nice weekend

Goodday, I owned FS2Crew for Fs2004 for the iFly737 Now I have Prepare3D.V2.4 and want to fly with the iFly737 (for P3D) What version do I have to use for this. I assume that that the FS2004 version is very outdated, but do I have to buy the FSX version or is there coming a brand new P3D/V2.4 version of FS2crew? (BTW - We are talking about the button version) Many thanks for your support

Hello, Yes I have the latest update. but I have this since the beginning and I have never used a BBJ model. only the 737-700 WL and the 737-800 WL (both widescreen) just forgotten. Even after a re-install (several times) it does not change Hello, that's strange. I never used a BBJ model. Only the 737-700 WL and 737-800 WL (both wide screen) and yes, I have the latest update, but the problem is there from the first day/install beginning. (long time ago) I had several times try a re-install but no change. And as already mentioned, it's only by the 737-800

goodday, I use Fs2Crew with FS9. I have following issue with the B737-800 (not with the 737-700): During the start-up flow and landing-flow the startswitches are not going automatically to "cont" No problem to do that manually, but I noticed this only. and the pilot/co-pilot still saying "auto" ofcourse. is this a bug in the program or is this something else I missed...?

Goodday, I was wondering the following: I use FS2Crew for the iFly 737 (button control) since several months with very good results. Now I'm searching for a MCP and maybe EFIS panel for more realism. But during the flow and after take off the FS2Crew/FO pushed (virtual) i.e. the FD switches/VNAV-LNAV/CMD buttons. Is it then possible to push these buttons by myself on the MCP or is that the start of many conflicts. I hope that you understand what I mean, (english is not my native language) many thanks in advance for replys. I would like very much to get a MCP and/or EFIS but I want to use FS2Crew furthermore.

Problem solved. I missed the latest update of makerways.exe Thanks a lot for your help

I have made a flightplan in the flightplanner of Flight simulator himself. But the problem occures. Departing airport is not given in the flightplan. No departing data, no center data (everything totally blank) only arriving airport data.

Goodday, Just installed a brand new Aerosoft/EHAM and planned a flight by FSCommander. The plan is saved in the RC 4.3 directory. By opening the plan in RC 4.3 the departure airport (EHAM) is not recognised by RC 4.3. ( Only the destination airport) I have seen that my older saved flight has the same problem. Also flights to EHAM. When I open RC 4.3 my FS2004 is going to mess up, and I'm somwhere on the globe in the air but not where I suppose to be. Is here somebody who has or had the same problem, and can give someboday a solution in the right way for me?? (BTW I have made a rebuild of the database - (twice) thanks in advance