Roberto Alfieri

Right to thank you and show that i have followed all your suggestions: The RPN script unfortunately always returns 11 as the light intensity value, and nothing changes; even pressing the button repeatedly; unfortunately i am totally new to Reverse Notation so it is too much difficult to me to find the problem, even I have an idea (read below) So, i switched to the jscript approach, environment i know better, and i have modified the code: (WSH:jscript|AaoEntry) function AaoEntry(){ var pot = (A:LIGHT POTENTIOMETER:11, Percent); pot += 25; if (pot > 100) pot = 0; AaoCmd.exec(pot + " (>K:LIGHT_POTENTIOMETER_11_SET)"); } If the light value is randomly set (or manually, with the mouse in the plane touch display, at the first run there will be "strange" values; but the first time it will come to 100, then will start the right sequence The main problem even in the RPN script seems to be in the notation ">K:2:LIGHT_POTENTIOMETER_SET" This seems not correctly written, or something, but at the moment with my level of knowledge i can't find the mistake; but in my way it works, and you have showed me the way so thank you really very much, i have appreciated. I will study more and i will find the trick for sure, i can't stay with a technical issue to fix in my brain LAST BUT NOT LEAST: Considering i have had the chance to talk with mr. Lorby IN PERSON, could you be so kind to put an SSL certificate to your website so my provider will not consider it as the devil asking me 100 times if i REALLY want to access? :-)))) If needed, i will help you with pleasure Ciao and thank you very much one more time

you are my hero, not only for the suggestion, but for the EXPLAINATION If a man is hungry, don't give him a fish, but teach him HOW TO fish! (its the Bible not me :-DDDD) Thank you i will read more and more and will try to fully understand

i will check and, most important, i will try to understand exactly HOW IT WORKS

actually i have not used the first link, so thank you again but yes, i have checked vary other profiles, but i have always found commands with "INC" or "DEC" so no way

first of all thank you for your answer i have been able to use one button to set a SINGLE value What I am not able to do is how to create a system to cycle I have tested with a TextGauge button in thousand of ways but, for my inexperience, no success

Hi all I have to admit: i have a quite long experience in code development in general, but very small in any aspect related to FS2020 - so I am now in a dark tunnel and I can't see any light (literally) PLANE: HONDA JET GOAL: I would like to manage cockpit area ambient light with my combo Elgato Streamdeck + Axis and Ohs MY PROBLEM: Using AAO event/variable listeners I have understood that there are the command "K:Light_potentiometer_XX_set" and the variable "A:LIGHT·POTENTIOMETER:XX,·Percent" to work on this; actually the XX is 11 in this case the "percent" readable in the variable is a number between 0.000000 and 1.000000 There is NOT a command "INC" "DEC" as i have seen in other planes, so i have decided to use ONE stream deck button to cycle, sequentially, 0-25-50-75-100 of the light intensity. Unfortunately, i am not able to understand how to create a script to do this; i have found this video https://www.youtube.com/watch?v=GCXgaj3ah8U&list=PLVrv-Tg8MzVi3jX6Qux8wCmAB4288-iJP&index=6&t=591s which seems exactly to go in the direction i need but i have spent may ber one whole day in tentative without success So, I will appreciate any help and suggestion (using this method or any else, of course) to get my goal but, more important, TO LEARN Thank you so much to all the community!

so, not a bug, your tool is so well done it was difficult to believe to me great, crossing my fingers for the future, this is the only need I have for an external tool since i have adopted lilnav

i don't understand if this is a bug or not, I can't see online (vatsim) airspaces on the map i have set the connection, i see online clients/centers/servers lists, i see the traffic, but I can't see the areas with different colours as I see with other aerospaces as btw ICAO or so. is something I am doing wrong? Is it simply normal? I have to use tools as vattastic or so, but of course I would prefer just this! ciao great job really

I am using PC-12 V2 on P3D 3.4, and GTN750 1.22 50% of times, after avionics start. the GTN works but after some minutes it freezes It IS alive, in fact I can open/close panel, click on knobs and so on, but I can't use it in any way: just showing something on screen and no buttons working at all If I use the Carenado Phenom 100 with the GTN mod, it works like a breeze, same P3D istance and so on all is update to the real last version, all used in admin mode Even the suggestion i have found to set the GTN configuration panel to use ALL the cpu cores don't make any difference any idea? ciao and TY

Hallo I'm entering a flight plan, calculated by PRO-ATC-X. The plan is as follow: LSZH DCT ALBIX DCT ABESI N851 TORTU DCT BEBEV UM733 CORSI DCT LABOM DCT KOVAS LIEE All works fine, but when I try to enter the leg N851 to TORTU it is impossible to input. If I put as "via" the N851 airway it does not accept the TORTU wp. If I input TORTU as a direct destination, no problem. Prepar3D 3.4 fix 2 with Navigraph data updated to 1613 rev 1 (currently last one) Libraries rebuilt borh in PRO-ATC and Carenado. Can someone help? Thank you.

I can set a speed on the G1000 display, but I can't activate on autopilot the automatic speed control to have IAS speed automatically reached and stabilized Phenom 100 v2 on P3D v. 3.3 v1 on P3D v. 2.5 was working fine thank you

I know, this is the FSX/P3D section but I can't see an xplane section so I want to see if someone can help me, I have bought the TBM850 for X-Plane and I have several problems: - Text on MFD panel is bigger than the screen are, so goes out and it is impossible to read/make choices - The checklist is locked on "emergency" and it is impossible to change group; if I go on the next list, X-Plane freezes for several seconds - If you navigate in the emergency checklist, text moves randomly on screen - If you click on screens to popup, panels are bigger than my resolution (I have 3 1920x1200 monitors) - If I use my Saitek panel to set altimeter the gauge becomes crazy (on all other aircrafts works perfectly) - G1000 softbuttons often loose any action - G1000 range don't goes over 50 miles this is what I have discovered in a couple of days of tentatives, never had a full flight anyone in my situation????

First of all is NOT the pc who crashes, but the PC12, as i had slammed against something, which is simply invisibile. Sometime happens, sometime not today I have completely disabled crashes detection, and no problem with crash and/or stress detection it happens in any airport payware or P3D default you can drive 10 times and no problem, at 11th... bam! with defauklt Mooney never a problem really crazy

well i mean... no reason TO ME it happens quite often i'm taxing to go to the head of a runway or getting out after a landing i'm moving slow or a little faster in any place no matter where i am suddenly i crash as i have hitted an object but i can't see nothing and the next time i can pass in the exact same place and no problem what am i doing wrong (or not doing well)???? thank you for your help

er... can...you... please.... ehm... robertoa@videora.net THANK YOU