gustavoortenzi

It would be wonderful whitav8! I can no longer use the GEVIEW by now, with the atualization of Chrome! The simulation lost all the enjoyment.

That's exactly, Bob! Well, I mean when you move the hat view in joystick, you move the view in the google 3d view in the same manner! Is it possible to move in real time, as you fly? Sorry, I am very bad about programming or whatever configuration. So, if this changing in view is possible, could you send me the files and tell how to use them? I really apreciate what you are doing, Congratulations!

Many many thanks Propwash for posting this, and of course, to the creator, Robbie MacElrath!! For us, who just fly VFR it is a tremendous turning point. What some haven´t seen it is not the same of aerial imagery, it has ALL THE 3D scenery of the major cities, the real thing, not general buildings spread everywhere or a flat real image.... its a HUGE difference!! Thank you again, i tried gevision (didn't work) and all sort of other programs, none compares this! One thing I could really be amazed was if it somehow could follow the changing in the first person view in fsx

but WHY do we need to import these images to FSX or whatever sim. WE could use it as a "window" of the plane, managing the aircraft from fsx. GEVISION does that, from www.planetinaction.com; BUT I DONT KNOW WHY THIS AMAZING APP IS NOT WORKING FOR ME....It says "client mode only"! If anyone could help i would apreciate a lot!!

Im having the same problem with yahoo server in SBFL airport. The textures are the worst possible. If someone coudl help, ill post my ini file: Resolution limiter: 17 = 30cm/pixel, 16 = 60cm/pixel, 15 = 1.1m/pixel, 14 = 2.3m/pixel, 13 = 4.75m/pixel # Lower resolutions load faster, but are visually less appealing. The 30cm resolution may only be feasible # if you have at least 2GB of system memory. max_lod=16 # The following two settings allow you to tune Tileproxy to not preload specific LOD levels. This can # be used in conjunction with third party scenery products like "FS Altitude" that provides data only # up to a specific resolution. If you place this scenery higher than Tileproxy's world folders in the # scenery library then it will have precedence over Tileproxy for the specific LOD levels that it # contains. You can then instruct Tileproxy to not preload these low resolution LOD circles because # they are not needed anyway. # Lowest LOD ring to automatically preload tiles for. Must not be lower than 8. preload_min_lod=9 # Lowest LOD ring to automatically preload tiles for. Must not be higher than 17. preload_max_lod=15 # The maximum number of tile contexts that Tileproxy will send to the filter driver. A context # is essentially a very fast buffer for graphics data sitting in kernel memory that delivers # data right into FSX. Each tile context can hold an entire LOD 8...15 tile. Higher values # mean more use of your precious kernel memory though. The maximum number is 512. Lower if # you run out of RAM during flight and the PC starts to use the paging file a lot. max_contexts=512 # Generate Water Mask. This brings back shader-rendered water and allows # for the use of planes with floats (Goose, Beaver, etc...). If you turn this # option off, you get the Tileproxy behavior of Beta 5 and earlier versions. water_mask=On # Recommendation: FSX users: Use water_blending=on, water_smoothing=off # to get soft land/water transitions # # FS9 users: Use water_blending=off, water_smoothing=on # to get hard land/water transitions which # Tileproxy tries to match pixel-exact against coast-lines # # Combining water_smoothing and water_blending is discouraged. # It's slow and gives weird results. # Use blending techniques to create a soft land/water transition with some # transparency effect near the shoreline. Compatible with FSX only. water_blending=On # The distance in meters that you want land/water blending to extend from the # shore line. Larger values require more processing. Large values are now possible, # useful values are up to 2000 meters. Very high values may be detrimental to water # mask resolution. Loading speed however remains mostly unaffected by this setting. blend_distance=500.0 # The rate at which terrain is blended into the water color. 1.0 means a linear # blending, values > 1.0 blend faster. Values < 1.0 blend slower. This works # similarly to a Gamma Curve. An exponent of 2 gives a quadratic blend function, # an exponent of 0.5 results in a square root behavior. blend_exponent=0.6 # The minimal and maximal transparency of the water. The lower you choose the min value, # the more reflective the deep water will be. The higher the max value is chosen, the less # reflective the water will be directly at the shore line. The reflectiveness transitions # linearly from max to min throughout the distance given by blend_distance from the shore. # Allowed values are between 0 and 1, and alpha_min should be smaller than alpha_max or # things may look weird. # The following alpha_min values will not give you any dithering artifacts on all-water tiles, # so the use of these is recommended. It is multiples of 16/239 (rounded up slighty) # 0.0700, 0.1339, 0.2009, 0.2678, 0.3348, 0.4017, 0.4687 # 0.5356, 0.6026, 0.6695, 0.7365, 0.8034, 0.8703, 0.9373 alpha_min=0.1339 alpha_max=0.6026 # The water color in hexadecimal RGB notation. Prefix with #. This should be blue # or greenish blue or some shades of brown, depending on your preference. # Values of #000000 are discouraged when using water blending - it will result # in weird behavior at the shorelines. water_rgb=#000D1A # Try to smooth land/water boundaries by trying to match the water mask to the image content. # This is a a somewhat experimental algorithm. water_smoothing=Off # The decision threshold for water/land when water_smoothing is enabled. 0 means everything # will be turned to land, 1 means everything turns to water. Chose some value inbetween. water_threshold=0.33 # Maximum number of bytes allocated to BMP graphics tiles in RAM at any time (0 for unlimited) # The value below states 100 MB. cache_bytes_limit=90000000 # Maximum number of BMP tiles to cache in RAM at any time (0 for no limit). cache_tiles_limit=250000 # The currently active service is configured here. Only ONE active source please. # The other source statements should be commented out. #source=Acme Globe Service #source=Service Example 1 #source=Service Example 2 source=Service Example 3 #source=Service Example 4 # The sources you want to be able to switch from the GUI menu. # Separate the list entries with | and enclose in quotes. Make sure the # names specified here are valid services which are defined below. # You may want to rename the services according to your preference, # but make sure you replace all occurences of the strings. menu_sources="Service Example 1|Service Example 2|Service Example 3|Service Example 4" # Experimental API Hooking section. Disable if you see strange crashes and effects. # Currently we only have the DirectX 9 hook. More hooks are planned. enable_hooking=No # The DirectX 9 hook enables the moving map overlay. More features are planned. enable_dx9hook=No # A flag whether to show the moving map overlay initially or not. enable_movingmap=No # Dimensions and overlay colors of the moving map. Positions are percentages of the screen. # Width and Height refer to the full 512x512 pixel texture used for the map. To get a round # map circle, the ratio of width and height should match your screen's aspect ratio (e.g. 4:3) # Radius is given in the map texture's pixels where one pixel represents a LOD 15 tile. A # radius of 0 disables the round stencil and shows the entire 512x512 texture. Color is given # in a hexadecimal ARGB notation. movingmap_alpha=255 movingmap_color=#ff000000 movingmap_xpos=88 movingmap_ypos=15 movingmap_width=60 movingmap_height=80 movingmap_radius=60 # # Here begin the service specific configurations # # This is new when you specify captcha_module # # On encountering HTTP 302 redirects the captcha module will send Internet Explorer's cookies # stored for the specified service domain to the web server. It will also display whatever web # page the service redirects you to. This could be a page requiring you to enter a so-called # captcha. After entering the captcha correctly, the resulting session cookie will be stored as # a permanent cookie (expiration 1 day) in your IE Cookies folder and sent to the service on # subsequent requests. You will then be able to use the service as long as you wish, given that # you correctly enter the captcha dialog which may nag you once every 20 minutes or so. # # Explaining the captcha_config arguments: # # cookiedomain from captcha_config specifies the domain name for which cookies are stored. # This might be the service name plus a top level domain like ".com" # # cookieurl specifies a HTTP url from which an identifying cookie will be retrieved first, if # no existing identifying cookie is found. This may be required sometimes to make the captcha # dialog appear in the first place. This could be the service's front page URL (e.g. a search # engine) [Acme Globe Service] cache_folder=E:\TILEPROXY\cache.acme network_module=libnettile module_config="conn=20|rate=2.0|verbose=0|server=http://server*.acmeglobe.com|path=/terraintile?pos=%s&v=%v|quad=ABCD|balance=0123|agent=Mozilla/4.0 (compatible; The TileProxy Project)" captcha_module=captchaform captcha_config="cookiedomain=acmeglobe.com|cookieurl=http://www.acmeglobe.com" min_level=9 max_level=17 map_version=1 color_hack=No color_level=0 bulk_extend=25 [service Example 1] cache_folder=E:\TILEPROXY\cache.service1 network_module=libnettile min_level=9 max_level=19 map_version=1438 #level_mapping=9,10,11,14,14,15,15,16,17,18,19 #level_mapping=9,10,11,12,14,14,15,16,17,18,19 more radius HQ (13->14) #level_mapping=9,10,11,14,14,14,15,16,17,18,19 even more radius in HQ (12,13->14) color_hack=No color_level=13 bulk_extend=50 [service Example 3] cache_folder=E:\TILEPROXY\cache.service3 network_module=libnettile module_config="conn=20|rate=2.0|verbose=0|server=http://us.maps3.yimg.com|path=/aerial.maps.yimg.com/img?x=%x&y=%y&z=%z&v=%v&t=a|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)" min_level=9 max_level=19 map_version=1.8 color_hack=No color_level=0 bulk_extend=50 [service Example 4] cache_folder=E:\TILEPROXY\cache.service4 network_module=libnettile module_config="conn=20|rate=2.0|verbose=0|server=http://mapcache*.ask.com|path=/sat/%Z/%X/%Y?partner=|balance=1234|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)" min_level=5 max_level=19 map_version=1 color_hack=Yes color_level=12 bulk_extend=50 THANKS

WE HAVE TO THANK TO CHRISTIAN BUCHNER FOR THIS BY FAR THE BEST UTILITY TO FSX BY FAR!!!