danbw10

Hi everyone, I am currently mid-flight, flying the PMDG 737 NGX and I just changed the CRZ level for the step climb appropriately, and then VNAV disconnects, and it says 'VNAV disconnect' in scratchpad of FMC and FMC does not respond. I can click buttons on the FMC yet still it won't. Swift advice would be much appreciated as I am approaching T/D in 30 mins, Cheers and merry christmas!! Daniel

Hi everyone, Recently, my GPU has been acting strange and now loads itself between 80-99% when I'm playing FSX and many other games as well. As of a result of this, I have been getting lower FPS. For example on the ground at LGTS with the PMDG 737 With pretty high settings, would usually get 40-50 FPS in the VC (mouse cursor out of window obviously) but now I get 15-20. The lower FPS comes from the GPU coming under massive load: https://billedeupload.dk/?v=cP9Wh.png It has usually been around 40-60% The temps are not very high either. I have tried setting to 'preferred maximum performance' setting in Nvidia Inspector and changing the settings but doesn't help. I have tried updating, reinstalling and switching drivers but to no avail. Also to note that this seems to have happened after I opened up my PC and trying to access the fan controller. Could this have come from moving or touching some cables and parts? (I am a computer noob pretty much) Thanks in advance and any help would be much appreciated. Dan

(THIS WAS DOUBLE-POSTED - sorry browser told me I had timed out) Hello everyone, After the SP1b update, everything was fine, until 2 days after: Now, even running FSX as admin and dealing with DirectX, I notice I am missing some cockpit sounds, like turning the knobs, pressing buttons etc. they are gone.. thanks in advance and any help would be much appreciated. Cheers, Dan

Hello everyone, After the SP1b update, everything was fine, until 2 days after: Now, even running FSX as admin and dealing with DirectX, I notice I am missing some cockpit sounds, like turning the knobs, pressing buttons etc. they are gone.. Thanks in advance and any help would be much appreciated. Cheers, Dan

I have lost some cockpit sounds, like pressing buttons and turning knobs. That's all gone. There are still some sounds though.. Cheers, Dan

If I got EZDok, would that keep the mouse away from the window in which it has an effect? I heard with EZDok you use keyboard and joystick keys to switch views, and right now, I hold down space and move the mouse to pan around the cockpit or other views. Am I understanding this right? Cheers, Dan

I can't find any settings for intel Turbo Boost in Asus UEFI BIOS. Now, after installling my add-ons, mods, tweaks etc. again, my GPU still performs oddly at times. It is just very inconsistent which I would not expect for a high-end card like the GTX 770. This is just an easy example to relate and compare (I get worse scenarios on ground at EGLL for example): I locked my FPS at 60 (at 30 it acts strange), and when cruising with the T7, my FPS hangs around 60 and my GPU load is 32% - http://billedeupload.dk/?v=seWx5.png A few minutes later, my FPS drops to 30-40 and my GPU load becomes 65% - http://billedeupload.dk/?v=6e9Z4.png This is a shot in the dark but is there any solution to this native FSX glitch: mouse cursor causes fps loss? Cheers, Dan

So, temps are fine at idle now, but now the multiplier and CPU frequency has been going above 4.4. I haven't overclocked or attempted to at all: http://billedeupload.dk/?v=Losfq.png Windows Power Option is set to 'High Performance'.

Yeah, thanks for the help - appreciate it. I have a fresh Windows and FSX install, no REX, extra textures or any add-ons installed yet so I am not surprised by my frames. Once all the add-ons are installed it will go down naturally. Cheers, Dan

Nothing abnormal seems to go on during the prime95 stress test. Only using FSX as of yet, and using the latest Nvidia drivers (340.xx). What does AHCI do and where can I find this setting in the UEFI Asus BIOS?

Problem seems to have been fixed, but you never know. It could be a hardware issue.. Reinstalled Windows (didn't lose much, only 5 days old), reinstalled FSX, SP1 + SP2, tweaked loaded up default Trike at default EGBB no other add-ons, Silders close to high: Nvidia Inspector Temp 49 Fan 58% Load 55%. GPUZ Temp 49 Fan 58% Load 55% Frame rate: 200-300

I am fully convinced now that this is a hardware issue. I am experiencing the same pattern in other games. It appears as though my GPU is forcing massive load on to itself: http://billedeupload.dk/?v=JVUN7.png The load percentage (88%) is far too high from what I hear and in a normal instance, I should get it at around 50-60% which I do get sometimes but it changes every restart. On one occasion it can be fine with 50-60% load but after a restart the load will go back sometimes to above 90%. Difficult to explain but oh well. Let me note that my GPU was overclocked.

I have tried all your recommendations with no luck, as I expected; I just can't get it back to the way it was before and should be like others have theirs perform. I believe this is a hardware issue. Surely it's not normal that Nvidia Inspector shows that my GPU load is between 80 to 90% when playing Minecraft? (reinstalled windows, yet to install fsx). CPU seems to act normal in terms of temps and load..

If I load up FSX and load up the default set-up (ultralight, fair weather etc.), I only get 30-40 FPS. I know this is very unusual. FSX Settings: DetailRadius: Large Mesh Complexity: maximum Mesh Resolution: maximum Terrain Resolution: maximum Water: High2.x Scenery Complexity: Extremely Dense Autogen Density: Extremely Dense Bloom: OFF Lens Flare: ON Advanced Animations: ON Traffic: Only cars at 80% I know Bert Maybe it's just my misfortune, or maybe it's just me and my fussy personality. Nonetheless, a place where I would get above 60 FPS (without a frame limiter) I get 20-30 FPS now..

I should've said that I was unclear what resolved it. I have been doing many system restores, reverted them sometimes, edited some BIOS settings, Windows updates and changing Windows Power Option from 'High Performance' to 'Balanced'. In the two links in my previous, you will see in both images that in the top right, the multiplier value is different. The one with 4.4GHz was with the high temperatures I was talking about (idling at 50 C and FSX at 80 C). The second one was with the lower temperatures (idling at 30C and FSX at 50-60 C). I am still trying to work out what it was.. Cheers