FredAir

Thanks for the fast response vgbaron, I tried turning on the "no reverse zone", but as far as I can see it caused another problem, now that I push my throttle with just the slightest millimeter forward the simulator pushes the throttle to about 50% N1, seems like an easy fix, you got any ideas? Fred

I've now got my Joystick working, I changed the ID on JpyID from #2 to #11, but there's another problem, now my throttle is not working. I tried it in the PMDG 777 and the problem is that when i go fully backwards the throttle in-game goes into idle reverse and i can't get it put of that mode without clicking the reversers. I've got controllers disabled in P3D and the throttles mapped in FSUIPC as throttle 1 and 2, both are calibrated. It does not work in the aerosoft airbus either, so it's not aircraft related it seems. Thanks in advance /Fred

Thank you very much for the answer I'll be sure to check out the FSUIPC forums next time, but if I may I'd just like you to clearify what exactly I need to do with the joy names? Do you want me to change the numbers in front of the controllers, or is it something else that I need to change, if so, what do I change it to?

Thanks for your response Pete, I saw yesterday that version 5 of FSUIPC is now availible on Simmarket, do you think that I should upgrade to that version instead of using version 4?

Well I did not see any change after downloading JoyID. I'm using FSUIPC version 4 in P3D V3, do you think it would be a good idea to change over to FSUIPC version 5? And here's my .ini file as you requested [General] UpdatedByVersion=4969 History=JQO6B0E6VM2QGYDDE3WH9 InitDelayDevicesToo=No Annotate=Yes NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No NewDeleteVehiclesForAES=No AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No WideLuaGlobals=Yes AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No ThreadAffinityMask=x0 LuaAffinityMask=x0 InitDelay=0 GetNearestAirports=Yes LogOptionProtect=Yes OOMcheck=Yes OOMcheckInterval=10 TimeForLuaClosing=2 WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=20 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 Console=No FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.4.22.19868 SimConnectUsed=3.4.0.0 [Traffic Limiter] AirportPreference=50 PlannedAirportsPreference=50 GroundPreference=50 NearerPreference=50 TargetFrameRate=0 TrafficLimit=0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight X-56 Rhino Throttle 0.GUID={35FAD9F0-E63B-11E6-8004-444553540000} 3=Saitek Pro Flight X-56 Rhino Throttle 3.GUID={35FA3DB0-E63B-11E6-8003-444553540000} 2=Saitek Pro Flight Rudder Pedals 2.GUID={4BB41F10-4121-11E5-8001-444553540000} [Axes] PollInterval=10 RangeRepeatRate=10 0=1R,256,D,4,0,0,0 -{ DIRECT: Throttle }- 1=1U,256,D,4,0,0,0 -{ DIRECT: Throttle }- 2=3Y,256,D,6,0,0,0 -{ DIRECT: Mixture }- [Buttons] PollInterval=25 ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No Port=COM1 Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [WideServer] WideFSenabled=Yes [Sounds] Path=C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\Sound\ Device1=Primär ljuddrivrutin Device2=Högtalare (ASUS ROG Spitfire) [Profile.Boeing_777] 1=PMDG 777-FS2 FedEx Express [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16264,-330,-146,16383 Elevator=-16384,-100,512,16383 Rudder=-16384,0,512,16383 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 Throttle=-16384,16191 [Profile.Boeing_737] 1=Boeing 737-883NGX SAS Scandinavian Airlines (Saga Viking) 2=Boeing 737-82RNGX Pegasus Airlines Winglets 3=Boeing 737-86NNGX Norwegian Air Shuttle Winglets 4=Boeing 737-883NGX SAS Scandinavian Airlines (Freja Viking) Winglets 5=Airbus A319 Germanwings D-AGWZ 6=Boeing 737-8K2NGX KLM Royal Dutch Airlines Winglets 7=PMDG 737-900NGX PMDG House [Buttons.Boeing_737] 0=P3,6,C65759,0 -{FLAPS_DECR}- 1=P3,5,C65758,0 -{FLAPS_INCR}- 2=P3,8,C66079,0 -{GEAR_UP}- 3=P3,7,C66080,0 -{GEAR_DOWN}- 4=P3,10,C65752,0 -{PARKING_BRAKES}- 5=R3,28,C65607,0 -{ELEV_TRIM_DN}- 6=R3,27,C65615,0 -{ELEV_TRIM_UP}- 7=P0,10,C65752,0 -{PARKING_BRAKES}- 8=P0,8,C65759,0 -{FLAPS_DECR}- 9=P0,7,C65758,0 -{FLAPS_INCR}- 10=P0,5,C66080,0 -{GEAR_DOWN}- 11=P0,6,C66079,0 -{GEAR_UP}- 12=R0,27,C65615,0 -{ELEV_TRIM_UP}- 13=R0,28,C65607,0 -{ELEV_TRIM_DN}- 14=P0,4,C65860,0 -{AUTO_THROTTLE_ARM}- 15=P0,3,C65861,0 -{AUTO_THROTTLE_TO_GA}- [Axes.Boeing_737] RangeRepeatRate=10 0=0X,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- 1=0Y,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 2=0T,256,D,22,0,0,0 -{ DIRECT: Spoilers }- 3=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 4=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 5=1R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 6=1V,256,D,3,0,0,0 -{ DIRECT: Rudder }- 7=2X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 8=2Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 9=2R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 10=3X,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- 11=3Y,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- [JoystickCalibration.Boeing_737] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,117,512,16383 Elevator=-16380,-512,512,16380 Rudder=-16384,0,64,16383 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 Throttle1=-16384,-512,512,16159 Throttle2=-16191,-512,512,16255 [Buttons.Boeing_777] 0=P1,10,C65752,0 -{PARKING_BRAKES}- 1=P3,10,C65752,0 -{PARKING_BRAKES}- 2=P3,6,C65758,0 -{FLAPS_INCR}- 3=P3,8,C66080,0 -{GEAR_DOWN}- 4=P3,7,C66079,0 -{GEAR_UP}- 5=P3,5,C65759,0 -{FLAPS_DECR}- 6=P3,27,C65615,0 -{ELEV_TRIM_UP}- 7=P3,30,C65607,0 -{ELEV_TRIM_DN}- 8=P3,28,C65607,0 -{ELEV_TRIM_DN}- 9=U3,5,C65607,0 -{ELEV_TRIM_DN}- [Axes.Boeing_777] 0=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=2X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 3=2Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 4=2R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 5=3X,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- 6=3Y,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- [Profile.Boeing777_V2] 1=PMDG 777-FHT TNT Airways 2=Boeing 737-9K2NGX KLM Royal Dutch Airlines Winglets 3=Airbus A318 Aerosoft D-AERO (CFM) 4=PMDG 777-21HLR Emirates [Buttons.Boeing777_V2] 0=P3,6,C65759,0 -{FLAPS_DECR}- 1=P3,5,C65758,0 -{FLAPS_INCR}- 2=P3,8,C66079,0 -{GEAR_UP}- 3=P3,7,C66080,0 -{GEAR_DOWN}- 4=P3,10,C65752,0 -{PARKING_BRAKES}- 5=R3,28,C65607,0 -{ELEV_TRIM_DN}- 6=R3,27,C65615,0 -{ELEV_TRIM_UP}- [Axes.Boeing777_V2] RangeRepeatRate=10 0=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=1R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 3=2X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 4=2Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 5=2R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 6=3X,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- 7=3Y,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- [JoystickCalibration.Boeing777_V2] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,117,512,16383 Elevator=-16384,10,512,16207 Rudder=-16384,-16,512,16383 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 [Profile.Cessna_182] 1=C182_N6182G 2=C182_D-EXSW 3=C182_G-BDIG 4=C182_VH-DLL [Buttons.Cessna_182] 0=P3,10,C65752,0 -{PARKING_BRAKES}- 1=P3,8,C65759,0 -{FLAPS_DECR}- 2=P3,7,C65758,0 -{FLAPS_INCR}- 3=P3,1,C0,0 -{Custom control: <0>}- [Axes.Cessna_182] RangeRepeatRate=10 0=1X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=2X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 3=2Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 4=2R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 5=3X,256,D,6,0,0,0 -{ DIRECT: Mixture }- 6=3Y,256,D,4,0,0,0 -{ DIRECT: Throttle }- 7=3T,256,D,21,0,0,0 -{ DIRECT: ElevatorTrim }- [JoystickCalibration.Cessna_182] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16384,-153,-146,16145 Elevator=-16384,-80,512,16376 Rudder=-16384,0,512,16383 Throttle=-16384,16191 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16

Now I feel a little stupid I must say, so do I have do delete the axis assignments in P3D to make them work in FSUIPC?

When using FSUIPC you should disable your controllers in P3D, otherwise P3D will override FSUIPC, at least that's what froogle said in his video

Thanks for the fast response. I downloaded JoyID and it did not work, could possibly be me doing something wrong.. Do you by any chance have a link to that thread on the FSUIPC forums?

So, I've had the Saitek X-56 Rhino for a while, and it's worked without problems, until about a week ago. Neither the stick or trottle quadrant is working in P3D at the moment, but the wierd thing is it's working in the Saitek program. I've tried most of the usual stuff like changing USB port, I've also done a troubleshooting in Windows, with no results. I am using FSUIPC 4 and I have disabled my controllers in P3D. Very wierd problem, seems like it should be an easy fix. Thanks in advance /Fred

My sim has worked flawless for one year, today I installed World of Ai for Vpilot and since then the simulator crashes on startup with the standard windows crash message. Please help!! Kind regards /Fredrik

well i dont' wuite get it.. I searched for EGCC, one of the most problematic airports, and lots of .bgl and .bmp files appear, also some .txt files. Now I'm not sure which files to delete and which ones to save, or did I not search for the right things?

So as the title discribes this is the problem I'm having for many addon airports, both UK2000, Aerosoft etc. The promblem seems to be that the addon airport installs, but half or more of the default airport is still left and put on top of the payware. There must be a way of solving this, but how?? Thanks in advance /Fredrik

I have i5 :(

I can't manage to find that option in the "CPU features" here's a picture of it http://imgur.com/gallery/YltDquv/new

using the ms-7798 (MSI)

Been going around the internet and just found out that turning off hyperthreading may increase perfomance. I wanted to try it but could not manage to turn it off, can someone please help me!! Thanks in advance //Fredrik

Considering it's just an empty file (0kB) it should not make any difference, and just to let you know i ran my P3D after installing windows 10 and deleting the "TODO" file and it worked just fine!