CaptainLHKLM

I used this successfully for FSLTL, but when trying the same for AIG, the -optimized folder (converted to 2048 textures) was actually larger in size than the original AIG simobjects folder (with 4096 textures). Is that normal?

I've been getting decent results but when I cap frames to 30 in Nvidia and use application controlled VSYNC (also VSYNC is off in P3D), I get some screentearing when using RTSS. What VSYNC settings do you recommend?

Hi Mike, do you use an fps limiter? I just flew to LGSM and get 50 fps without a limiter, but setting scanline x/2 to 60 and fps limiter to 30 gives me a bunch of stutters when turning the aircraft on the ground, which seems weird given I can get more fps than 30. Do you have any ideas?

Hi Steve, do you use RTSS? I'm also trying to figure out what works well like OP, so I've tried setting Scanline Sync x/2 to 60 and capping frames to 35 in NCP. Do you recommend something else? Best wishes!

Oh I had no idea *sits in chair and feels dumb*, but how does the MJC have such good performance? That's a genuine question, not a jab at other developers!

I know nothing about flight sim development, but if the next project was developing the systems to run outside the sim like the Majestic Q400 for those fps we all crave, I would be more than happy!

Have you seen this? https://fselite.net/previews/fselite-exclusive-qualitywings-simulations-tease-bae146-in-p3dv4/

Oh I definitely am, with the 747 too! But the Airbus Widebody is a bit of a gap in the market right now.

I'd love to see the A330 or 777-200ER done, but that's just me and my love for (KLM) long hauls 😃

Hi all, I want to move to FSX:SE, but am wondering if using FSX native products are a breach of the EULA, which I want to avoid doing. For example the PMDG MD11, using this, is that a breach? Thanks all!

Hi all, I think I found a mistake in the EULA, maybe worth correcting. In the FSX PMDG 737 600/700 expansion is "for use only with Prepar3d by Lockheed Martin" although it is the FSX installer. Thanks, Daniel Rehling

Hi all, I have a quick question, the EULA states you cannot reverse engineer a product, etc, but does using the DX 10 fixer for FSX count as this? For PMDG aircrafts this is. Thank you and kind regards, Daniel Rehling

Thanks for the speedy reply Tony!

Hi all, On my disk, space is running really quite low, and I was wondering if I can remove some default simobjects to save space? Is this allowed or against the EULA? As in, does it count as reverse engineering or modifying? Thank you!

Hi and thanks for replying! However I though the FTX forum was not for support but this is instead? Thanks!

Hi all, FTX central keeps on crashing when I start it up, it tells me to attach a file which has not been attached as I do not know how to do this on AVSIM, but the file was called ftxc3.log. Should I copy the text log here? Thanks!

Hi! Ah yes, I am flying with a VA. I'll do a flight without the ACARS and see if it occurs.

I checked and tried the transponder button (T) but nothing happened, perhaps I'll install it again.

That could well be possible, i'll check, however in FSX I didn't experience this.

Hi All! I recently bought the PMDG 777 for P3D off of Aerosoft, and everything works fine (at least in my eyes) however TCAS seems to be turning off on its own. Yesterday I did a flight from AMS-JFK and I remember turning off TCAS and later I look at the ND and see the warning. Today, I was already roughly 5 hours into the flight without a warning, and then suddenly it appears again. It is not the warning though, the TCAS switch on the pedestal goes back to standby also. Really it is not a big issue, but for realism needless to say it would be great if it didn't turn off. Thank you! Daniel Rehling

Hi all! Sorry for my last comment; it didn't quite fix the problem as everything 2D went blurry. I notice that the zoom level has to be between .70 and 1.0 however my monitor is very small. I have to zoom out to 0.60 to be able to see the PFD and ND on the same frame. Would a larger monitor fix this issue? Thanks in advance,

Never mind, I've fixed it by turning on 8x Sparse Grid Supersampling in Nvidia Inspector. Thank you alot anyway for replying so quickly!

Thank you alot for the quick reply! Reading from your post; a new monitor would fix this? Thanks in advance,

Hello all! I experience an issue which can be seen on the screenshot. I get a square pattern texture glitch on all the screens, no matter what time and when the cockpit lighting is illuminated (it is on the picture) I get the same issue. If it helps I have a GTX970 and a 1280 x 1024 monitor. https://www.dropbox.com/s/pea7gol9wuqo5kn/PMDG%20777%20Texture%20Error.jpg?dl=0 Thanks in advance,