sudqui

Hi. Someone use RKsoftware OI4FS of the flight4sim web? I need to know if you know how to do It, how to change the script lines in order to blue leds light on. In the original script the Orange leds works properly but the blue leds in the script don't have output lines. As you can see in the lines from 1147 to 1157 there is no outputs and then I can not programm the leds. How can I rewrite these lines to get the blue leds light on? I send you a photo to see what I mean. Regards.

Hi. Someone knows how to Connect three máster iocards to a expansión iocard? It show me a error Window. Regards.

Hi. I am trying to Connect leds from máster iocard output, but I have the following problem. I know the pin number 2 is GND, but the pin 1 is 5v. So where does cable number 1 connect? How does the 5v power supply power the LEDs? The cable number 1 must not Connect to anywhere? Regards.

Hi. I have read somewhere that just using the desktop extension configuration works perfectly. Regards

hello. I use three 32-inch televisions for the main view of the simulator and I use Nvidia surround to join the three screens into one. The problem is that on the side screens the view as you approach the end of them lengthens and becomes distorted. Do you know any way to make it look correct? Greetings.

I have It. Do you still need It ?

With all other FS2020 airplanes the throttle works correctly.

Hello, from one day to the next the plane gives me this error. I start it normally but when I move the throttle lifters there is no thrust in the motors. Do you know what could be happening? Greetings.

Hi. I saw the manual and I didn't see nothing about some of my problems...only I saw when parts of plane not shown, only. Thanks.

Hi MDFlier. Where can I find this manual? Thanks. Hi Tooting, yes, dx10 is on.

Several windows? I have three tv 32" in surround with GTX970 and the fmc is a touchscreen. It is why the FMC is down when I make a screenshot. Ah ok, I understandyou. It's why the simulator was open when I make screenshot. The rear window is the simulator and the front window is the screenshot. The down window is the touchscreen. Regards.

I'm going to rename the topic as it was half the title, I'm sorry. Hi. For some time now I have problems with FSX. When it is already loaded and choose the flight that I do, often to load the flight the plane will not load at all if for example I put the outside view.It is shown for example only the shade and the windows ... sometimes the entire plane but without wheels and so a variety of options. Sometimes what it is not shown full airport, such as the absence of fingers. I'll put some pictures and see. https://imageshack.com/i/p7ufgaQEj http://imageshack.co...5029/2nrbiw.jpg http://imageshack.co.../259/pZBucd.jpg http://imageshack.co...1863/Npq4Vp.jpg Everything worked fine until I installed the BAE.146 QW. I already uninstalled and everything remains the same. I even uninstalled the aircraft currently flying the PMDG B747 and everything remains the same. You know that it may be due to this failure? 0 Selective Quote Quote MultiQuote Edit More pictures, ths ATR flight1 it shows this way. http://imageshack.com/a/img905/6365/0oXGvE.jpg http://imageshack.com/a/img908/5509/ipWRvv.jpg http://imageshack.com/a/img911/1691/yLBLof.jpg I also uninstalled this plane. And the problems continue.

Hello...Nobody knows how to create a new profile with LINDA? It's impossible I can fly my B747 with Combo II? Thanks.

Hello. I know that this is not the VRSIM forum but I visit the VRINSIGHT web and the forum support there's no yet. If you know the answer I thank you. My question is how to programm the rotary knobs with Keymapper to turn right it so that the turn left it works ok. When I trie to program using right click mouse doesn't recognize the pushing of the right click. Do you know how to do it? Regards.

Hello. I have 747 PMDG FSX and MCP combo II Boeing and I can't make that works with linda. I've seen a post from 2012 and there wasn't solution then. Do you know if now 747 PMDG is working with linda and MCP combo II? Regards.

Hello dgraham. Yes I updated the OBRX. I tried unistalling and reinstalling and at first all scenaries are correct, but after loading several times different scenaries, suddenly and without changing anything in the library of scenaries, return to appear the same airports with their platforms, taxiways and runways high field. I don't know what is happening.

Hello Guenseli and thanks for your answer. I know what is the port, is the number 3. My problem now is, I'm not sure how to create a profile for my 747 pmdg. When I go to the MCP part in LINDA there are a list of planes at the top and there's no the 747 pmdg. Then, What I have to do to create a profile for LINDA works with my plane? I have to go to NEW? I tried to create a new profile but only got it to work the baro on the left side of the combo and nav buttons, com, TRNX in part on the right. Even I download a profile here in avsim but following the manual/tutorial I can't make it work. Can you explain to me how create a profile for a 747 pmdg? Thanks in advance.

Hello. I have OBRX Base pack, OBRX vector and land class europe. My problem is that I don't know how is the right order to put them in the scenary library. The order I have now is the following: 1. mega airport madrid 2.OBRX!OPENLC_EUROPE1 3.OBRX!OPENLC_EUROPE10 4.OBRX!OPENLC_EUROPE2 5.OBRX!OPENLC_EUROPE3 6.OBRX!OPENLC_EUROPE4 7.OBRX!OPENLC_EUROPE5 8.OBRX!OPENLC_EUROPE6 9.OBRX!OPENLC_EUROPE7 10.OBRX!OPENLC_EUROPE8 11.OBRX!OPENLC_EUROPE9 12.OBRX!OPENLC_NAMERICA1 13.OBRX!OPENLC_BASE 14.ADDON SCENARY 15.Edwars_AFB . . . . 34.asia 35.Africa 36. FS Global 2008 LOCAL MESHES 37. FS Global 2008 EUROPE 38. FS Global 2008 THE AMERICAS 39. FS Global 2008AFRICA 40. FS Global 2008 ASIA 41. OBRX!VECTOR_APT 42. OBRX!VECTOR_OBJ 43. OBRX!VECTOR_CVX 44. OBRX!VECTOR_EXX 45. OBRX!VECTOR_AEC 46. Base1107 . . . 142. Default scenary 143. default terrain. 144. FS GLOBAL 2008 OCEANIA. In this order the the platform where aircraft park, the taxiways and the runways appear high on the ground a few meters. If I disable the box WORK! VECTOR APT platform, the taxiways and runways are at the right level, but are filled with trees. Anyone know how to properly put all these parameters? Regards.

Hello. Nobody has seen the post???? Hello. I discover a mistake I made...usb cable was disconnected ... unforgivable of me. I've done all the installation process and all buttons do not work, only some of them as, ie the right of the mcp only works the baro, part of the radio works all about nav, com, trasnponder, adf, etc. Can someone tell me how to make everything work? Regards.

Sorry, I would like to say LINDA, no LIDA...

Hello. I have FSX and MCP combo Boeing. I have 7 joys of selling Chinese bazaars which dismounted and fabricated a device with many buttons that functions overhead. I have too 3 IOcards for many purposes. I have too two saitek pro flight joke, rudders and saitek swicht panel. Ok, my firts problem is that I unzipped LINDA in modules folder and I'm reading the instrucctions from the tutorial to install the mcp combo boeing. I first delete all the assigments from all joys, Iocards, saitek instruments and after I go to the setup joysticks and save. After this I go to the setup mcp combo , and I set all the parameters in the tutorial are. In mcp combo settings I set mcp2(boeing), enabled, and com 2 and save. In fsuipc config I set version 4.939 (ok), fsuipc4.ini: looking good, [VRInsight] found, ok, x=com2 found ,ok. I create a line in fsuipc4.ini and write [VRInsight] 1=COM2. And when I run LINDA console a line shws the next words: LUA.00---->:: could not open MCP combo port and when start the fsx show me a window that says: LUA DISPLAY : VRI MCP combo is enabled but no found the port com2. I've forgot something when installing LINDA or MCP SETUP? Other question, before deleting all the assigments from the all joys I save a copy from the c-users-appdat-roaming-microsoft-fsx-controls-standad when are all the assigments saved. I can use LINDA without delete the assigments from all joys excecp mcp combo? Regards.