frmeyer

yes,i own the 530 only,in my case i can see in 2 gauges the same thing

Only problem i have now to fit 2 gns 530 in to the Milviz's 310 Redux , i trying this ,but only 1 installed there even the Milviz add-on management is allways 2 combinations not 2 the same , I dont know how can i fit 2 of them in there thanks

thank you

Hi guys I bought this RealityXP Garmin GNS 530 (FltSim) in june 2018 Is this only for gns 530 or for 430 as well,also for both thank you fmeyer

I have p3dv4.4 , normally somebody got already files to just copy paste in the directory you can change setups things there,but no good https://imgur.com/a/kJIyZ1p

hi guys is there anything for MilViz 310R Redux v3 thanks

I actually collecting flight sim magazines. I got Pc Pilot full from 1-120 and Computer Pilot missing only a few issues bevor 2002 . what i do i buy these magazines cut them off completely scan them and make them a pdf ,all digital now as my second hobby,they computer pilots hard to get now ,none available so far,if i see them i will buy them much nicer to read on 40 inch screen then holding a real mag if anybody has issues from these vintage magazine Full Throttle or Flight Simulator World ,please let me know they are complete gone from earth thanks

no worries,i will upgrade thanks

4.1.7.22841

hi guys I gotta problem with ATC in p3dv4 ,if i turn progressive taxi here,nothing happens https://imgur.com/a/dIenIUO what i am doing wrong here thanks

Is Pro-atc/x compatible with Reality-XP thanks

hi guys https://imgur.com/a/mqxRCHc is running in the back ground ,looks good ,please check if I running in any problems I let you know thanks regards

Do you mean it is not showing in the aircraft list when you select "fly now" not showing in aircraft list https://imgur.com/a/UerU0tC thanks

Hi guys My airplane doesn't show in PRO-ATC when I reload the flight plan in to P3d . I got B60 duke loaded in p3d and also i added the same plane in Pro-atc ,looks this pro-atc works only for airliners . https://imgur.com/a/UerU0tC thanks meyer

hi guys Is there any solution for this graphic problems for these 3 party planes in p3dv4 https://imgur.com/a/Eq8Qwgv only happens too these Realair planes,B60 and duke turbine,and only happens outside not inside I use Ezdok camera add-on thanks

it's a learning curve😀

ah well ,at least gns500 works now thanks

I just tried it out ,if I go to config panel p3d add-on and config the GNS 530,it looks like this http://www.mediafire.com/file/6w95pb823djiw6s/fits_in.jpg/file and of course,only the pop up works the GNS500 it looks like this,very nice and working all the buttons http://www.mediafire.com/file/686bka6dn4z0a4w/real_air.jpg/file

yes,very nice,is all there I thought gns 530 is better for the duke thanks

works very nice Bert,thank you very much I saved all the backup files for the g500 now I will try to install GNS 530 only ,without the g500

ok got xml.file they are all moving buttons now,problem is now to get the function in there Enable (Use Simulator GPS Commands) via the GNS configuration panel. (Press and hold the SHIFT key then RIGHT-Click the top edge of the GNS device to open the configuration panel) that doesn't work here,because when I hold shift and click the mouse right the p3d panel comes up not the GNS configuration panel

ok ,Bert http://www.mediafire.com/file/686bka6dn4z0a4w/real_air.jpg/file this panel ,looks good ,only the power button works ,the other knobs you can move them as well ,but no function ,pop up works gotta Enable (Use Simulator GPS Commands) via the GNS configuration panel. (Press and hold the SHIFT key then RIGHT-Click the top edge of the GNS device to open the configuration panel). i will report back // Panel Configuration file // RealAir Simulations Beechcraft Turbine Duke V2 2014 Update // Panel and Gauge Programming by Sean Moloney // Copyright (c) 2014 RealAir Simulations // =============================================================================== // IMPORTANT - 'Window01' AND 'Window02' BELOW ARE RESERVED FOR GPS POPUPS AND CAN // BE OVERWRITTEN BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY // EDITING THIS FILE. IF YOU WANT TO ADD CUSTOM WINDOW ENTRIES, YOU CAN USE ANY // VALUE FROM 'Window03' TO 'Window 09'. // =============================================================================== [Window Titles] Window00=Main Panel Window01=RXP GPS500 Window02=Blank [Window00] file=2D_Help.bmp size_mm=1024, 95 position=6 BACKGROUND_COLOR=0,0,0 visible=1 ident=MAIN_PANEL [Window01] position=8 window_size=0.30, 0.38 visible=1 ident=15531 gauge00=rxpGNS2!GPS_500_1, 0, 0, 100, 100,Popup_Settings window_pos= 0.660, 0.260 [Window02] size_mm=1,1 position=0 visible=0 ident=15600 BACKGROUND_COLOR=0,0,0 gauge00=RASDuke!Blank, 0, 0, 1, 1 [VCockpit01] size_mm=1024,1024 pixel_size=1024,1024 texture=$RAS_Duke_CFG background_color=1,1,1 gauge01=Config!Options, 1020, 1023, 1, 1 gauge02=Config!RealView, 1021, 1023, 1, 1 gauge03=Config!RadioLayout, 1027, 1023, 1, 1 gauge04=RASDuke!InitVars, 1022, 1023, 1, 1 gauge05=RASDuke!1hzCode, 1023, 1023, 1, 1 gauge06=RASDuke!2hzCode, 1024, 1023, 1, 1 gauge07=RASDuke!18hzCode, 1025, 1023, 1, 1 gauge08=RASDuke!NavCom1, 1, 2, 509, 61 gauge09=RASDuke!NavCom2, 1, 64, 509, 61 gauge10=RASDuke!ADF, 4, 127, 332, 49 gauge11=RASDuke!Xpndr, 7, 243, 305, 57 gauge12=RASDuke!Autopilot, 5, 177, 292, 62 gauge13=RASDuke!DME, 4, 305, 256, 46 gauge14=RASDuke!KA285_Annun, 512,2,337,108 gauge15=RASDuke!Annunciator_Turbine, 516, 111, 226, 245 gauge16=RASDuke!Moritz_LCD, 808, 133, 214, 259 gauge17=RASDuke!Fuel_Qty_LCD, 410, 128, 105, 86 gauge18=RASDuke!Master_Warn, 893, 1, 130, 129 // =============================================================================== // IMPORTANT - 'gauge19'. 'gauge20, 'gauge21', and 'gauge22' BELOW CAN BE OVERWRITTEN // BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY EDITING THIS FILE // IF YOU WANT TO CHANGE THE GPS ENTRIES AND DON'T WANT THEM OVERWRITTEN IN ANY // CIRCUMSTANCE THEN CHANGE THE GAUGE NUMBERS. EG - CHANGE 'gauge 19' TO 'gauge22' // =============================================================================== gauge19=rxpGNS2!GPS_500_1, 40, 650, 370, 274,VC_settings gauge20=RASDuke!Blank, 0, 0, 1, 1 gauge21=RASDukeTv2_Sound!Sound, 1,1,2,2, \Sound\RASDukeTv2_Sound.ini gauge22=RASDuke!Sound_Manager, 1,1,3,3 gauge23=RASDuke!Pressurisation, 1024, 1023, 1, 1 gauge24=Config!ModelOptions, 1020, 1023, 1, 1 gauge25=Config!GNS500BUTTONS, 0, 0, 1, 1 Day=255,255,255 Night=225,117,89 Luminous=200,200,101 [Default View] X=0 Y=0 SIZE_X=8192 SIZE_Y=6144

it did the changes,but for some reason it changes back

ok,this is when real xp is loaded // Panel Configuration file // RealAir Simulations Beechcraft Turbine Duke V2 2014 Update // Panel and Gauge Programming by Sean Moloney // Copyright (c) 2014 RealAir Simulations // =============================================================================== // IMPORTANT - 'Window01' AND 'Window02' BELOW ARE RESERVED FOR GPS POPUPS AND CAN // BE OVERWRITTEN BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY // EDITING THIS FILE. IF YOU WANT TO ADD CUSTOM WINDOW ENTRIES, YOU CAN USE ANY // VALUE FROM 'Window03' TO 'Window 09'. // =============================================================================== [Window Titles] Window00=Main Panel Window01=GPS Window02=Blank [Window00] file=2D_Help.bmp size_mm=1024, 95 position=6 BACKGROUND_COLOR=0,0,0 visible=1 ident=MAIN_PANEL [Window01] position=8 window_size=0.30, 0.38 visible=1 ident=15531 gauge00=rxpGNS2!GNS_530_2, 0, 0,100,100 window_pos= 0.660, 0.260 [Window02] size_mm=1,1 position=0 visible=0 ident=15600 BACKGROUND_COLOR=0,0,0 gauge00=RASDuke!Blank, 0, 0, 1, 1 [VCockpit01] size_mm=1024,1024 pixel_size=1024,1024 texture=$RAS_Duke_CFG background_color=1,1,1 gauge01=Config!Options, 1020, 1023, 1, 1 gauge02=Config!RealView, 1021, 1023, 1, 1 gauge03=Config!RadioLayout, 1027, 1023, 1, 1 gauge04=RASDuke!InitVars, 1022, 1023, 1, 1 gauge05=RASDuke!1hzCode, 1023, 1023, 1, 1 gauge06=RASDuke!2hzCode, 1024, 1023, 1, 1 gauge07=RASDuke!18hzCode, 1025, 1023, 1, 1 gauge08=RASDuke!NavCom1, 1, 2, 509, 61 gauge09=RASDuke!NavCom2, 1, 64, 509, 61 gauge10=RASDuke!ADF, 4, 127, 332, 49 gauge11=RASDuke!Xpndr, 7, 243, 305, 57 gauge12=RASDuke!Autopilot, 5, 177, 292, 62 gauge13=RASDuke!DME, 4, 305, 256, 46 gauge14=RASDuke!KA285_Annun, 512,2,337,108 gauge15=RASDuke!Annunciator_Turbine, 516, 111, 226, 245 gauge16=RASDuke!Moritz_LCD, 808, 133, 214, 259 gauge17=RASDuke!Fuel_Qty_LCD, 410, 128, 105, 86 gauge18=RASDuke!Master_Warn, 893, 1, 130, 129 // =============================================================================== // IMPORTANT - 'gauge19'. 'gauge20, 'gauge21', and 'gauge22' BELOW CAN BE OVERWRITTEN // BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY EDITING THIS FILE // IF YOU WANT TO CHANGE THE GPS ENTRIES AND DON'T WANT THEM OVERWRITTEN IN ANY // CIRCUMSTANCE THEN CHANGE THE GAUGE NUMBERS. EG - CHANGE 'gauge 19' TO 'gauge22' // =============================================================================== gauge19=rxpGNS2!GNS_530_2,40,650,370,274 gauge20=RASDuke!Blank, 0, 0, 1, 1 gauge21=RASDukeTv2_Sound!Sound, 1,1,2,2,./SimObjects/Airplanes/RealAir Duke Turbine V2/Panel/Sound/RASDukeTv2_Sound.ini gauge22=RASDuke!Sound_Manager, 1,1,3,3 gauge23=RASDuke!Pressurisation, 1024, 1023, 1, 1 gauge24=Config!ModelOptions, 1020, 1023, 1, 1 Day=255,255,255 Night=225,117,89 Luminous=200,200,101 [Default View] X=0 Y=0 SIZE_X=8192 SIZE_Y=6144 http://www.mediafire.com/file/6w95pb823djiw6s/fits in.jpg but inside no functions or the g500 buttons ,only when i pop up the unit works ,is there any trick to fit the whole gns 530 in there thanks

not yet, i replaced the the files in panel.cfg and added the other once in the ini after only the pop up is working not the real one ,look add the ini [GPS_500_2] ; is the master device if true. MasterDevice = true ; selects COM/NAV Radios '1' or '2'. RadiosPair = 2 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; integral lighting percent (0 to 100) Rheostat.Display = 100 ; integral lighting percent (0 to 100) Rheostat.Buttons = 75 ; connects GPS to Autopilot if true. LinkOto = true ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course motor if true. LinkCrs = false ; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS). LinkObs = false ; connects GPS to VOR if true. LinkVor = false ; connects CDI key to NAV/GPS switch if true. AutoNavGps = false ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY PowerSource = AVIONICS_BUS ; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF PowerKnob = NONE ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = false ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; connects GPS #1 to GPS #2 if true (both required). UseCrossFill = false ; enable device failures if true. UseFailures = false ; uses Simulator GPS commands if true. UseSimGpsCmds = false ; updates Simulator GPS flight plan if true. LinkSimGps = false ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; use legacy mouse (left CCW, right CW, middle Push) (override instances settings) UseAltMouse = false ; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars). UseLegacyVars = false ; sets fuel type: AVGAS,JETA,JETB FuelType = AVGAS ; sets TAWS type: TERR,TAWS TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; HSI lateral deviation scale factor. CdiScale = 1 ; HSI vertical deviation scale factor. GsiScale = 1 ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; mute sound when simulator window looses focus if false. NoAudioFocus = false ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GPS_500_2.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = false ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 [GNS_530_2] ; is the master device if true. MasterDevice = true ; selects COM/NAV Radios '1' or '2'. RadiosPair = 2 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; integral lighting percent (0 to 100) Rheostat.Display = 100 ; integral lighting percent (0 to 100) Rheostat.Buttons = 75 ; connects GPS to Autopilot if true. LinkOto = true ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course motor if true. LinkCrs = false ; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS). LinkObs = false ; connects GPS to VOR if true. LinkVor = false ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY PowerSource = AVIONICS_BUS ; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF PowerKnob = NONE ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = false ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; connects GPS #1 to GPS #2 if true (both required). UseCrossFill = false ; enable device failures if true. UseFailures = false ; uses Simulator GPS commands if true. UseSimGpsCmds = false ; updates Simulator GPS flight plan if true. LinkSimGps = false ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; use legacy mouse (left CCW, right CW, middle Push) (override instances settings) UseAltMouse = false ; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars). UseLegacyVars = false ; sets fuel type: AVGAS,JETA,JETB FuelType = AVGAS ; sets TAWS type: TERR,TAWS TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; HSI lateral deviation scale factor. CdiScale = 1 ; HSI vertical deviation scale factor. GsiScale = 1 ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; mute sound when simulator window looses focus if false. NoAudioFocus = false ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GNS_530_2.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = false ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 [GNS_530_1] ; is the master device if true. MasterDevice = true ; selects COM/NAV Radios '1' or '2'. RadiosPair = 1 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; integral lighting percent (0 to 100) Rheostat.Display = 100 ; integral lighting percent (0 to 100) Rheostat.Buttons = 75 ; connects GPS to Autopilot if true. LinkOto = true ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course motor if true. LinkCrs = false ; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS). LinkObs = false ; connects GPS to VOR if true. LinkVor = false ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY PowerSource = AVIONICS_BUS ; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF PowerKnob = NONE ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = false ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; connects GPS #1 to GPS #2 if true (both required). UseCrossFill = false ; enable device failures if true. UseFailures = false ; uses Simulator GPS commands if true. UseSimGpsCmds = false ; updates Simulator GPS flight plan if true. LinkSimGps = false ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; use legacy mouse (left CCW, right CW, middle Push) (override instances settings) UseAltMouse = false ; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars). UseLegacyVars = false ; sets fuel type: AVGAS,JETA,JETB FuelType = AVGAS ; sets TAWS type: TERR,TAWS TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; HSI lateral deviation scale factor. CdiScale = 1 ; HSI vertical deviation scale factor. GsiScale = 1 ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; mute sound when simulator window looses focus if false. NoAudioFocus = false ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GNS_530_1.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = false ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 [GPS_500_1.VC_Settings] ; show screen only gauge if true. nobezel = true ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; auto-resize dimension (width,height) refsize = ; left mouse button popup ident (ex: GPS_PANEL or 225). popleft = 15531 ; right mouse button popup ident (ex: GPS_PANEL or 225). popright = [GPS_500_1.Popup_Settings] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; auto-resize dimension (width,height) refsize = ; left mouse button popup ident (ex: GPS_PANEL or 225). popleft = 15531 ; right mouse button popup ident (ex: GPS_PANEL or 225). popright = [GPS_500_1] ; is the master device if true. MasterDevice = true ; selects COM/NAV Radios '1' or '2'. RadiosPair = 1 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; integral lighting percent (0 to 100) Rheostat.Display = 100 ; integral lighting percent (0 to 100) Rheostat.Buttons = 75 ; connects GPS to Autopilot if true. LinkOto = true ; connects GPS to HSI if true. LinkHsi = true ; connects GPS to HSI course motor if true. LinkCrs = false ; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS) (NB: HSI/OBS = NAV1 OBS). LinkObs = false ; connects GPS to VOR if true. LinkVor = false ; connects CDI key to NAV/GPS switch if true. AutoNavGps = false ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY PowerSource = AVIONICS_BUS ; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF PowerKnob = NONE ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = false ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; connects GPS #1 to GPS #2 if true (both required). UseCrossFill = false ; enable device failures if true. UseFailures = false ; uses Simulator GPS commands if true. UseSimGpsCmds = false ; updates Simulator GPS flight plan if true. LinkSimGps = false ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; use legacy mouse (left CCW, right CW, middle Push) (override instances settings) UseAltMouse = false ; use legacy GNS WAAS 3rd party aircraft panel variables (L:Vars). UseLegacyVars = false ; sets fuel type: AVGAS,JETA,JETB FuelType = AVGAS ; sets TAWS type: TERR,TAWS TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 40 ; HSI lateral deviation scale factor. CdiScale = 1 ; HSI vertical deviation scale factor. GsiScale = 1 ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; mute sound when simulator window looses focus if false. NoAudioFocus = false ; selects the CPU running the trainer process: 1 to 32 ; 0: last core, -1: automatic. CpuAffinity = -1 ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GPS_500_1.DEFAULT] ; show screen only gauge if true. nobezel = false ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; display mouse tooltips if true. tooltips = false ; enable mouse clickspots if true, disable if false. usemouse = true ; enable alternate click-spots (left CCW, right CW, middle Push) if true. usealtmouse = false ; auto-resize dimension (width,height) refsize = ; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popleft = ; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225). popright = ; adjust brightness (0 to 100) brightness.bezel = 100 ; offset brightness (-100 to +100) brightness.screen = 0 that one is the panel.cfg // Panel Configuration file // RealAir Simulations Beechcraft Turbine Duke V2 2014 Update // Panel and Gauge Programming by Sean Moloney // Copyright (c) 2014 RealAir Simulations // =============================================================================== // IMPORTANT - 'Window01' AND 'Window02' BELOW ARE RESERVED FOR GPS POPUPS AND CAN // BE OVERWRITTEN BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY // EDITING THIS FILE. IF YOU WANT TO ADD CUSTOM WINDOW ENTRIES, YOU CAN USE ANY // VALUE FROM 'Window03' TO 'Window 09'. // =============================================================================== [Window Titles] Window00=Main Panel Window01=GPS Window02=Blank [Window00] file=2D_Help.bmp size_mm=1024, 95 position=6 BACKGROUND_COLOR=0,0,0 visible=1 ident=MAIN_PANEL [Window01] position=8 window_size=0.30, 0.38 visible=1 ident=15531 gauge00=rxpGNS2!GNS_530_2, 0, 0,100,100 window_pos= 0.660, 0.260 [Window02] size_mm=1,1 position=0 visible=0 ident=15600 BACKGROUND_COLOR=0,0,0 gauge00=RASDuke!Blank, 0, 0, 1, 1 [VCockpit01] size_mm=1024,1024 pixel_size=1024,1024 texture=$RAS_Duke_CFG background_color=1,1,1 gauge01=Config!Options, 1020, 1023, 1, 1 gauge02=Config!RealView, 1021, 1023, 1, 1 gauge03=Config!RadioLayout, 1027, 1023, 1, 1 gauge04=RASDuke!InitVars, 1022, 1023, 1, 1 gauge05=RASDuke!1hzCode, 1023, 1023, 1, 1 gauge06=RASDuke!2hzCode, 1024, 1023, 1, 1 gauge07=RASDuke!18hzCode, 1025, 1023, 1, 1 gauge08=RASDuke!NavCom1, 1, 2, 509, 61 gauge09=RASDuke!NavCom2, 1, 64, 509, 61 gauge10=RASDuke!ADF, 4, 127, 332, 49 gauge11=RASDuke!Xpndr, 7, 243, 305, 57 gauge12=RASDuke!Autopilot, 5, 177, 292, 62 gauge13=RASDuke!DME, 4, 305, 256, 46 gauge14=RASDuke!KA285_Annun, 512,2,337,108 gauge15=RASDuke!Annunciator_Turbine, 516, 111, 226, 245 gauge16=RASDuke!Moritz_LCD, 808, 133, 214, 259 gauge17=RASDuke!Fuel_Qty_LCD, 410, 128, 105, 86 gauge18=RASDuke!Master_Warn, 893, 1, 130, 129 // =============================================================================== // IMPORTANT - 'gauge19'. 'gauge20, 'gauge21', and 'gauge22' BELOW CAN BE OVERWRITTEN // BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY EDITING THIS FILE // IF YOU WANT TO CHANGE THE GPS ENTRIES AND DON'T WANT THEM OVERWRITTEN IN ANY // CIRCUMSTANCE THEN CHANGE THE GAUGE NUMBERS. EG - CHANGE 'gauge 19' TO 'gauge22' // =============================================================================== gauge19=rxpGNS2!GNS_530_2, 1,607,502,416 gauge20=RASDuke!Blank, 0, 0, 1, 1 gauge21=RASDukeTv2_Sound!Sound, 1,1,2,2,./SimObjects/Airplanes/RealAir Duke Turbine V2/Panel/Sound/RASDukeTv2_Sound.ini gauge22=RASDuke!Sound_Manager, 1,1,3,3 gauge23=RASDuke!Pressurisation, 1024, 1023, 1, 1 gauge24=Config!ModelOptions, 1020, 1023, 1, 1 Day=255,255,255 Night=225,117,89 Luminous=200,200,101 [Default View] X=0 Y=0 SIZE_X=8192 SIZE_Y=6144 thanks