Jump to content

Indianajones

Members
 View Profile  See their activity

  • Content Count

    27

  • Donations

    $0.00 

  • Joined

  • Last visited

Posts posted by Indianajones

  1. Posted

    51 minutes ago, FDEdev said:

    That's not ironic. With a jet you can either slow down or descend, but not both at the same time (without speedbrakes). I suggest you learn how to correctly fly the A320 instead of starting to alter the flight dynamics.

    Have you worked with air files before? 

    This isn’t just normal flight characteristics I’m talking about Wilco has had this problem before, 1,000 Fpm descent speed brakes almost fully out and the speed tape doesn’t move, supposedly at idle thrust, also descending through dense air below 10,000 doesn’t change anything, I have to wait until I get to final approach altitude before I can really get the speed down, however I don’t have a ton of time flying it so it could be the FMGC still trying to hold a certain descent speed parameter even though I’ve taken manual control of the speed, no I have not messed with air files only .cfg for lights and such, I will study up on it 

  2. Posted

    4 hours ago, FDEdev said:

    Don't know the Wilco Airbus, but it's no problem to adjust idle thrust on ground so it doesn't affect the aircrafts behavior/performance in flight.

    So ironically also the aircraft has a real problem slowing on descent so honestly I wouldn’t mind changing the idle thrust on the ground and in the air, got any ideas on the best way to do that?

  3. Posted

    4 hours ago, lzamm said:

    I think the reason for this is more FSX's poor tyre friction model rather than incorrect idle - changing the idle will also change its behaviour in flight, affecting the descent characteristics which the developers probably worked hard to get right.

    There is (was?) a fix for the tyre friction bundled with FSUIPC, perhaps you could try that?  You might need the registered version, however, if you don't already have it.

    Thanks, 

  12. Posted

    Hi all,

       So I’m working on improving the FeelThere ERJ-145LR V2 on FEX-SE and one of the things I needed to fix was The well known problem on the steam release ERJ of no exterior lights. I’ve gotten mostly everything done but one thing I would like to change is the “size” or brightness of the strobes. I actually used the Carenado PC-12 strobes because they look better than the default ones IMO, at first I couldn’t get them to flash they were just solid on, but at least when they were solid on they looked great, fixed that by copying some of the effects from the default strobe but now they seem smaller and less bright, go figure similar to the default strobes. So anyways point of the matter does anyone know what controls the size/bloom/brightness of the strobes in the effects file?

                                              Thank you in advance 

  16. Posted

    5 hours ago, Ricardo41 said:

    The Feelthere Erj was one of my favorite planes in FS9, sadly FeelThere seem to have lost their way. 

    For some reason, I can't see the jpegs you posted. I remember owning a couple of nice BizJet liveries for the Erj, but for some reason I can't find them anymore.....Does anyone have a link?

    Sorry I don’t, Have you tried looking on the Feelthere website for the liveries that people said were free?  I’ve heard those are gone now but you never know..the small amount of searching I’ve done I haven’t found any real liveries for at least the erj 145LR....but in terms of the original post so I went on last night and thought if I could get the Fx.default lights on so easily, could I take the strobes from the Carenado PC-12 and throw them in because they look so much better than default, so basically copied the same steps and sure enough there they were but they are solid (not flashing) tonight I’m going to try working in the effects file to get them flashing, has anyone exactly what controls the flashing of beacon/stone? 

  19. Posted

    Well I’m just wondering did it work for all the “thank you” people or were they thanking preemptively Has anyone had it not work? Have you come across any problems? following your “read me” word for word the only thing that happened was when I turn the logo light on it’s like the light is placed in the VC and there is a very bright spotlight effect in the VC, everything else stayed default and as I said before I realized then that I was missing strobe, beacon, Nav, lights...fixed that with the fx. Default lights until I can figure out how I screwed this up....also I’m running pretty much default FSXSE

  21. Posted

    You know it’s almost like I’m screwing something up while readying the plane for taxi and takeoff and it’s causing a fault in the navigation system, also since you obviously seem to have the airplane do you know what’s up with the cabin alt alert coming on in the upper 20,000’s ft I’ve maxed out the cabin alt setting at about what looks like 10,300 and it still gives me the cabin alt warning light?

  22. Posted

    Thanks for the response...perhaps but it seems different, it seems as though it was designed in as a fault of some kind but I dont have simulated emergencies on or anything like that so idk, I really would rather reinstall as a last resort because my antivirus already seemed to hate this add on had to keep forcing it through over and over until it finally installed, plus it’s not something that totally ruins the experience it’s just a slight annoyance the fault happens very early in the flight and once it does happen and I reset everything it doesn’t happen again, I was just wondering if anyone else had this problem, I’ve scoured the internet (to the best of my abilities) and found one single thread on it and they didn’t solve it, just prayed to the simulator gods for a fix from Carenado and then the thread ended years ago, I suppose I could check the trusted status on my antivirus and see if anything is there, again thanks for the response and help 

  23. Posted

    Hey, 

     So I recently purchased the Carenado PA46 JetPROP, (I know it’s old) and for some reason early in the flight sometimes even when still on the ground the Autopilot and GPS530 seems to “trip” and needs to be reset. Also when this happens the stall warning light comes on and stays on for the rest of the flight. Anyone figured out what this is? By the way I’m running it on FSX SE. any help would be great thanks!

  24. Posted

    Hi all, 

        

     so I’m running ASN and FSX SE on windows 7 and at first it worked perfectly but recently I’ll be 20 mins into the flight and it suddenly loses connection, then closes to the desktop to tell me about it and then I can’t get back in to fsx. Also when this happens there is a little exclamation point over my WiFi signal so I troubleshoot it and it fixes it no problem and then says the WiFi does not have valid IP configuration...any help would be greatly appreciated, I’m thinking it could be something with the firewall which is through Norton if anyone has any ideas please let me know 

×
×
  • Create New...