ehemad

Hi everyone does anyone know whether is possible to configure in the scnery creation (SDK) variable signs or markings? let me explain, in many airports there are a digital signal hanging out of the tower indicatiing runway in use, obviously that marking depends on the current wind direction, and thuis it changes depending on it we have created several airports scenarios with this so to speak signals, but do not find a way to make it change depending on wind direction any tip or knowledge here? https://drive.google.com/file/d/1lkaAtT0ujMiLbFOfaf4rfM5vlJ7_W8Le/view?usp=share_link thanks and good day

ok, first tetst done this past weekend results so far: Touchscreen working fine if directly connected to the computer running msfs2020, uncoupled G3x screen working pretty well. Impossible to make it work with spacedesk (moving uncoupled G3X to another computer running spacedesk viewer) the only thing that happens is that screen swings when moving the finger, there is no touch capability despite activavted in the spacedesk viwer setup... happy to have comments or ideas to try something else

Rob how do you make a change of airplane with a single botton?

Thanks Rob, yes i know air manager and i use it, but the G3X Garmin is not in the list of instruments so my idea was to skip air manager for this particular project and interface directly with the msfs2020 via the Working Title published mod. So basically i need some who has tried ths already if there´s any... anyway i have bought today a touchscreen tft and will be able to run the tests my self in a few days... we´ll know the answer soon enough :-)... if it does work it will be simply amazing... you´ll be able to have a simple to biuld, easy to run new generation GPS for very little, runing native in msfs2020 for several different airplanes thanks anyway for the heads up regards

Hello every one I am thinking of making a G3X stand alone device (3d printed) with a touchscreen behind. Working title team has created a nice mod i recommend to everybody. Now the big question (before i sepend some money in a touchscreen) here is, has anyone tryied to use a touch screen with the G3X or any other touch screen based GPS or avionics system?, is it working with MSFS2020? I am a taliking about a simple screen connected to the graphics card running as an additional screen, not an ipad or tablet connected via "SPACEDESK" (recommended software by the way) expecting your comments and experiences kind regards Enrique

Hello, i am planing to uncouple the screen and run it in a touch screen monitor, is the sotware touch screen compliant? can i do such a thing of running in a touch screen monitor??? thanks, great job!!!!

thanks guys i had same problem with new version 1.13.17.0... logging out from xbox app solved the issue

Well Enrico from project magenta has uploaded a model of the b737 ng for Xplane 11, doing some tests now, i managed to skip the wild banks and pitches, but the precission approahes do something wrong in short final, trying to find out, the rest seems to work pretty fine

After some more test, leaving Projectmagenta MCP aside, has its implications, being mainly that some autopilot modes are not working line Lnav etc so you need to fly just with heading... and some of the GC indications are incomplete or missing i.e. when making an ils approch when gs is acquired (the sceen of xplane will indicate, bit not the projectmagenta GC, this is becuase both CDUs (PM and XP) are working in parallel and pretty much independently... conclusion: it would be great if the mcp worked... but it does not... talked to Enrico Schriatti and said, mcp config need to be manually adapted with drastic chage in some of the parameters provided the xp flight model is quite diffrent to that of the FSX or other b737 models). after several hours touching here an dthere i did not manage to make the b737 doing crazy movments when SP is engaged... will keep posting findings

Hi, thanks for that info very useful, a lot of things together.... but i think i have solved it.... here is the thing for anyone with Opencockpits (may be with some other hardware, i have a friend doing some tests with FSBUS)... Well, the best solution so far (still doing some more tests with some other software) is ocusbmapper., with some tricks 1.- i have installed just for the sake of a try the file for the mcp (i guess it will work with the rest of modules, but did not try yet) I have installed in a copy of the laminar b737 (did not try in the zibo one yet) 2.- If using Project Magenta software, make sure you DO NOT start the projectmagenta MCP (this is the key for seeing all working fine), GC and CDU work perfectly fine integrated with xplane 11, but not the MCP. and that´s all, finally enjoying xplane11, projectmagenta and opencockpits hardware to its full extension take care all out there

Hi everyone I hace been a FSX simmer for a long time, until I tried xplane11... cuantic jump... still i am finding some issues with my setup... if by anychance there is some one with the same thing and has solved the following issues, please contact me. Here we go: basically i am trying to run Xplane 11 with the software of Project Magenta (for the b737) and as hardware Opencockpit (MCP, EFIS, etc) Problems i am finding: 1) With the the laminar B737, The Automatic pilot does extrage things to pitch when engaged, especially in a leveled flight attitude, it starts to do wild ups and downs, trim gets crazy, i guess is a syncronization issue with the trim really but despite of thinking about it a lot i have no idea of how to solve it. 2) with the zibo planes (737) The autopilot is working much better, although i have seen that in final ils approaches it also has some errors (capturing and following glisde slope mainly), Autothrottle does not work, Course does not work (i.e. despide turning the knob (in the opencockpits MCP) the radial does not move, although seems to try, something is preventing it to move, and only moves if touching the zibo course button directly on the sim... it looks project magenta and zibo are not connecting properly on those controls (course and autothrottle). Any ideas will be very wellcome, thanks a lot